# Default config for sway
# Read `man 5 sway` for a complete reference.

### Variables
#
# Logo key. Use Mod1 for Alt.
set $mod Mod4
# Home row direction keys, like vim
set $left h
set $down j
set $up k
set $right l
# Your preferred terminal emulator
set $term alacritty
# Your preferred application launcher
# Note: pass the final command to swaymsg so that the resulting window can be opened
# on the original workspace that the command was run on.
# Recommends: rofi-wayland
set $rofi_cmd rofi \
        -terminal '$term'
# Shows a combined list of the applications with desktop files and
# executables from PATH.
# TODO: add window with the next release of rofi-wayland
set $menu $rofi_cmd -show combi -combi-modes drun#run -modes combi

### Output configuration
#
# Default wallpaper (more resolutions are available in /usr/share/backgrounds/sway/)
# Requires: desktop-backgrounds-compat, swaybg, jxl-pixbuf-loader
output * bg /usr/share/backgrounds/default.jxl fill
#
# Example configuration:
#
#   output HDMI-A-1 resolution 1920x1080 position 1920,0
#
# You can get the names of your outputs by running: swaymsg -t get_outputs

### Idle configuration
#
# Example configuration:
#
# exec swayidle -w \
#          timeout 300 'swaylock -f -c 000000' \
#          timeout 600 'swaymsg "output * power off"' resume 'swaymsg "output * power on"' \
#          before-sleep 'swaylock -f -c 000000'
#
# This will lock your screen after 300 seconds of inactivity, then turn off
# your displays after another 300 seconds, and turn your screens back on when
# resumed. It will also lock your screen before your computer goes to sleep.

# Idle and lock configuration is also defined in /usr/share/sway/config.d/90-swayidle.conf
# Lock after 6 minutes (1 minute longer than rest break).
set $lock_timeout 360

exec swayidle -w \
    timeout 5 '/home/tgrosinger/code/wlr-break-timer/break-event idle_start' \
    resume '/home/tgrosinger/code/wlr-break-timer/break-event idle_end' \
    before-sleep '/home/tgrosinger/code/wlr-break-timer/break-event idle_start' \
    after-resume '/home/tgrosinger/code/wlr-break-timer/break-event idle_end'

### Input configuration
# You can get the names of your inputs by running: swaymsg -t get_inputs
# Read `man 5 sway-input` for more information about this section.
input "2362:628:PIXA3854:00_093A:0274_Touchpad" {
    # Allow clicking by tapping.
    tap enabled
    # Moving fingers up moves the display down, like a phone.
    natural_scroll enabled
    # Two fingers is right click.
    click_method clickfinger
}

### Key bindings
#
# Basics:
#
    # Start a terminal
    bindsym $mod+Return exec $term

    # Kill focused window
    bindsym $mod+Shift+q kill

    # Start your launcher
    bindsym $mod+d exec $menu

    # Window switching
    bindsym $mod+Tab exec rofi -show window -modes window

    # Clipboard history
    bindsym $mod+Shift+v exec /home/tgrosinger/.config/rofi/scripts/paste.sh

    # Calculator
    bindsym $mod+Equal exec /home/tgrosinger/.config/rofi/scripts/qalc.sh

    # Lazygit
    bindsym $mod+g exec alacritty --title Floating-Lazygit --command /home/linuxbrew/.linuxbrew/bin/lazygit; grab_focus; floating enable
    for_window [title="Floating-Lazygit"] floating enable
    for_window [title="Floating-Lazygit"] resize set 1800 1200

    # Drag floating windows by holding down $mod and left mouse button.
    # Resize them with right mouse button + $mod.
    # Despite the name, also works for non-floating windows.
    # Change normal to inverse to use left mouse button for resizing and right
    # mouse button for dragging.
    floating_modifier $mod normal

    # Reload the configuration file
    bindsym $mod+Shift+c reload

    # Exit sway (logs you out of your Wayland session)
    bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -B 'Yes, exit sway' 'swaymsg exit'
#
# Moving around:
#
    # Move your focus around
    bindsym $mod+$left focus left
    bindsym $mod+$down focus down
    bindsym $mod+$up focus up
    bindsym $mod+$right focus right
    # Or use $mod+[up|down|left|right]
    bindsym $mod+Left focus left
    bindsym $mod+Down focus down
    bindsym $mod+Up focus up
    bindsym $mod+Right focus right

    # Move the focused window with the same, but add Shift
    bindsym $mod+Shift+$left move left
    bindsym $mod+Shift+$down move down
    bindsym $mod+Shift+$up move up
    bindsym $mod+Shift+$right move right
    # Ditto, with arrow keys
    bindsym $mod+Shift+Left move left
    bindsym $mod+Shift+Down move down
    bindsym $mod+Shift+Up move up
    bindsym $mod+Shift+Right move right

    # Move the workspace to another output/monitor
    bindsym $mod+Shift+m move workspace to output right
#
# Workspaces:
#
    # Switch to workspace
    bindsym $mod+1 workspace number 1
    bindsym $mod+2 workspace number 2
    bindsym $mod+3 workspace number 3
    bindsym $mod+4 workspace number 4
    bindsym $mod+5 workspace number 5
    bindsym $mod+6 workspace number 6
    bindsym $mod+7 workspace number 7
    bindsym $mod+8 workspace number 8
    bindsym $mod+9 workspace number 9
    bindsym $mod+0 workspace number 10
    # Move focused container to workspace
    bindsym $mod+Shift+1 move container to workspace number 1
    bindsym $mod+Shift+2 move container to workspace number 2
    bindsym $mod+Shift+3 move container to workspace number 3
    bindsym $mod+Shift+4 move container to workspace number 4
    bindsym $mod+Shift+5 move container to workspace number 5
    bindsym $mod+Shift+6 move container to workspace number 6
    bindsym $mod+Shift+7 move container to workspace number 7
    bindsym $mod+Shift+8 move container to workspace number 8
    bindsym $mod+Shift+9 move container to workspace number 9
    bindsym $mod+Shift+0 move container to workspace number 10
    # Note: workspaces can have any name you want, not just numbers.
    # We just use 1-10 as the default.
#
# Layout stuff:
#
    # You can "split" the current object of your focus with
    # $mod+b or $mod+v, for horizontal and vertical splits
    # respectively.
    bindsym $mod+b splith
    bindsym $mod+v splitv

    # Switch the current container between different layout styles
    bindsym $mod+s layout stacking
    bindsym $mod+w layout tabbed
    bindsym $mod+e layout toggle split

    # Make the current focus fullscreen
    bindsym $mod+f fullscreen

    # Toggle the current focus between tiling and floating mode
    bindsym $mod+Shift+space floating toggle

    # Swap focus between the tiling area and the floating area
    bindsym $mod+space focus mode_toggle

    # Move focus to the parent container
    bindsym $mod+a focus parent
#
# Scratchpad:
#
    # Sway has a "scratchpad", which is a bag of holding for windows.
    # You can send windows there and get them back later.

    # Move the currently focused window to the scratchpad
    bindsym $mod+Shift+minus move scratchpad

    # Show the next scratchpad window or hide the focused scratchpad window.
    # If there are multiple scratchpad windows, this command cycles through them.
    bindsym $mod+minus scratchpad show
#
# Resizing containers:
#
mode "resize" {
    # left will shrink the containers width
    # right will grow the containers width
    # up will shrink the containers height
    # down will grow the containers height
    bindsym $left resize shrink width 10px
    bindsym $down resize grow height 10px
    bindsym $up resize shrink height 10px
    bindsym $right resize grow width 10px

    # Ditto, with arrow keys
    bindsym Left resize shrink width 10px
    bindsym Down resize grow height 10px
    bindsym Up resize shrink height 10px
    bindsym Right resize grow width 10px

    # Return to default mode
    bindsym Return mode "default"
    bindsym Escape mode "default"
}
bindsym $mod+r mode "resize"

#
# Screenshots
# If I want to add more screenshot hotkeys in the future this can be wrapped in a mode.
#

# Capturing a window does not seem to be supported by Sway yet.
#bindsym w exec grim -T "$(swaymsg -t get_tree | jq -j '.. | select(.type?) | select(.focused).foreign_toplevel_identifier')" - | satty -f - && swaymsg 'mode "default"'

# Capture rectangle
bindsym $mod+Shift+s exec grim -c -g "$(slurp)" - | satty --early-exit --output-filename "/home/tgrosinger/Pictures/$(date +'%Y-%m-%dT%H:%M:%S_grim.png')" --copy-command "wl-copy" -f - && swaymsg 'mode "default"'

#
# Program-specific rules
#

# Possible fix for using web clipper.
for_window [class="obsidian"] focus_on_window_activation focus

# Handy transcribing
bindsym $mod+o exec handy --toggle-transcription

#
# Theme
#

include catppuccin-latte

# target                 title     bg        text   indicator  border
client.focused           $lavender $surface0 $text  $rosewater $lavender
client.focused_inactive  $overlay0 $base     $text  $rosewater $overlay0
client.unfocused         $overlay0 $base     $text  $rosewater $overlay0
client.urgent            $peach    $base     $peach $overlay0  $peach
client.placeholder       $overlay0 $base     $text  $overlay0  $overlay0
client.background        $base

#
# Launch default apps
#

exec copyq

# Include configs from 3 locations:
#  - /usr/share/sway/config.d
#  - /etc/sway/config.d
#  - $XDG_CONFIG_HOME/sway/config.d ($HOME/.config/sway/config.d)
#
# If multiple directories contain the files with the same name, the later
# directory takes precedence; `$XDG_CONFIG_HOME/sway/config.d/20-swayidle.conf`
# will always be loaded instead of `/usr/share/sway/config.d/20-swayidle.conf`
# or `/etc/sway/config.d/20-swayidle.conf`
#
# This mechanism permits overriding our default configuration per-system
# (/etc) or per-user ($XDG_CONFIG_HOME) basis. Just create the file you
# want to modify/override in the higher-level directory.
#
# For example, to disable the default bar from Fedora configs, you'll need to
#     $ echo -n > "$HOME/.config/sway/config.d/90-bar.conf"
#
# Note the quoting, the $() and the arguments quoting. All the parts are equally
# important to make the magic work. And if you want to learn the secret behind
# the trick, it's all in the `wordexp(3)`.
#
include '$(/usr/libexec/sway/layered-include "/usr/share/sway/config.d/*.conf" "/etc/sway/config.d/*.conf" "${XDG_CONFIG_HOME:-$HOME/.config}/sway/config.d/*.conf")'
