Expand test coverage (#77)

* ignore line endings in cli tests
* ignore line endings in integration tests
* expand code coverage for `choc` footprint
* expand code coverage for `chocmini` footprint
* expand code coverage for `mx` footprint
* expand code coverage for `pad` footprint
* expand code coverage for rest of footprints
* expand code coverage for `anchor.js`
* expand code coverage for `units.js`
* expand code coverage for `points.js`
* expand code coverage for `filter.js`
* expand code coverage for `outlines.js`
* expand code coverage for `pcbs.js`
* expand code coverage for `ergogen.js`
* expand code coverage for `kle.js`
* more code coverage for `outlines.js`
* expand code coverage for `cases.js`

src/anchor.js

@@ -17,8 +17,11 @@ const aggregator_common = ['parts', 'method']
 const aggregators = {
     average: (config, name, parts) => {
         a.unexpected(config, name, aggregator_common)
-        let x = 0, y = 0, r = 0
         const len = parts.length
+        if (len == 0) {
+          return new Point()
+        }
+        let x = 0, y = 0, r = 0
         for (const part of parts) {
             x += part.x
             y += part.y

test/cases/operations.yaml

@@ -0,0 +1,36 @@
+points.zones.matrix: {}
+outlines:
+  _square:
+    - what: rectangle
+      where: true
+      size: [8, 8]
+  _circle:
+    - what: circle
+      where: true
+      radius: 3
+cases:
+  _cube:
+    - name: _square
+      extrude: 8
+  _cylinder_one:
+    - name: _circle
+      extrude: 8
+  _subtract:
+    target:
+      name: _cube
+      what: case
+    tool:
+      name: _cylinder_one
+      what: case
+      operation: subtract
+  _cylinder_two:
+    - name: _circle
+      extrude: 8
+      shift: [0,4,4]
+      rotate: [90,0,0]
+  _flat_square:
+    - "_square"
+  combination:
+    - "_subtract"
+    - "~_cylinder_two"
+    - "+_flat_square"

test/cases/operations___cases_combination_jscad.jscad

@@ -0,0 +1,205 @@
+function _square_outline_fn(){
+    return new CSG.Path2D([[-4,-4],[4,-4]]).appendPoint([4,4]).appendPoint([-4,4]).appendPoint([-4,-4]).close().innerToCAG()
+.extrude({ offset: [0, 0, 8] });
+}
+
+
+function _circle_outline_fn(){
+    return CAG.circle({"center":[0,0],"radius":3})
+.extrude({ offset: [0, 0, 8] });
+}
+
+
+
+
+                function _subtract_case_fn() {
+                    
+
+                // creating part target of case _subtract
+                let _subtract__part_target = _cube_case_fn();
+
+                // make sure that rotations are relative
+                let _subtract__part_target_bounds = _subtract__part_target.getBounds();
+                let _subtract__part_target_x = _subtract__part_target_bounds[0].x + (_subtract__part_target_bounds[1].x - _subtract__part_target_bounds[0].x) / 2
+                let _subtract__part_target_y = _subtract__part_target_bounds[0].y + (_subtract__part_target_bounds[1].y - _subtract__part_target_bounds[0].y) / 2
+                _subtract__part_target = translate([-_subtract__part_target_x, -_subtract__part_target_y, 0], _subtract__part_target);
+                _subtract__part_target = rotate([0,0,0], _subtract__part_target);
+                _subtract__part_target = translate([_subtract__part_target_x, _subtract__part_target_y, 0], _subtract__part_target);
+
+                _subtract__part_target = translate([0,0,0], _subtract__part_target);
+                let result = _subtract__part_target;
+                
+            
+
+                // creating part tool of case _subtract
+                let _subtract__part_tool = _cylinder_one_case_fn();
+
+                // make sure that rotations are relative
+                let _subtract__part_tool_bounds = _subtract__part_tool.getBounds();
+                let _subtract__part_tool_x = _subtract__part_tool_bounds[0].x + (_subtract__part_tool_bounds[1].x - _subtract__part_tool_bounds[0].x) / 2
+                let _subtract__part_tool_y = _subtract__part_tool_bounds[0].y + (_subtract__part_tool_bounds[1].y - _subtract__part_tool_bounds[0].y) / 2
+                _subtract__part_tool = translate([-_subtract__part_tool_x, -_subtract__part_tool_y, 0], _subtract__part_tool);
+                _subtract__part_tool = rotate([0,0,0], _subtract__part_tool);
+                _subtract__part_tool = translate([_subtract__part_tool_x, _subtract__part_tool_y, 0], _subtract__part_tool);
+
+                _subtract__part_tool = translate([0,0,0], _subtract__part_tool);
+                result = result.subtract(_subtract__part_tool);
+                
+            
+                    return result;
+                }
+            
+            
+
+                function _cube_case_fn() {
+                    
+
+                // creating part 0 of case _cube
+                let _cube__part_0 = _square_outline_fn();
+
+                // make sure that rotations are relative
+                let _cube__part_0_bounds = _cube__part_0.getBounds();
+                let _cube__part_0_x = _cube__part_0_bounds[0].x + (_cube__part_0_bounds[1].x - _cube__part_0_bounds[0].x) / 2
+                let _cube__part_0_y = _cube__part_0_bounds[0].y + (_cube__part_0_bounds[1].y - _cube__part_0_bounds[0].y) / 2
+                _cube__part_0 = translate([-_cube__part_0_x, -_cube__part_0_y, 0], _cube__part_0);
+                _cube__part_0 = rotate([0,0,0], _cube__part_0);
+                _cube__part_0 = translate([_cube__part_0_x, _cube__part_0_y, 0], _cube__part_0);
+
+                _cube__part_0 = translate([0,0,0], _cube__part_0);
+                let result = _cube__part_0;
+                
+            
+                    return result;
+                }
+            
+            
+
+                function _cylinder_one_case_fn() {
+                    
+
+                // creating part 0 of case _cylinder_one
+                let _cylinder_one__part_0 = _circle_outline_fn();
+
+                // make sure that rotations are relative
+                let _cylinder_one__part_0_bounds = _cylinder_one__part_0.getBounds();
+                let _cylinder_one__part_0_x = _cylinder_one__part_0_bounds[0].x + (_cylinder_one__part_0_bounds[1].x - _cylinder_one__part_0_bounds[0].x) / 2
+                let _cylinder_one__part_0_y = _cylinder_one__part_0_bounds[0].y + (_cylinder_one__part_0_bounds[1].y - _cylinder_one__part_0_bounds[0].y) / 2
+                _cylinder_one__part_0 = translate([-_cylinder_one__part_0_x, -_cylinder_one__part_0_y, 0], _cylinder_one__part_0);
+                _cylinder_one__part_0 = rotate([0,0,0], _cylinder_one__part_0);
+                _cylinder_one__part_0 = translate([_cylinder_one__part_0_x, _cylinder_one__part_0_y, 0], _cylinder_one__part_0);
+
+                _cylinder_one__part_0 = translate([0,0,0], _cylinder_one__part_0);
+                let result = _cylinder_one__part_0;
+                
+            
+                    return result;
+                }
+            
+            
+
+                function _cylinder_two_case_fn() {
+                    
+
+                // creating part 0 of case _cylinder_two
+                let _cylinder_two__part_0 = _circle_outline_fn();
+
+                // make sure that rotations are relative
+                let _cylinder_two__part_0_bounds = _cylinder_two__part_0.getBounds();
+                let _cylinder_two__part_0_x = _cylinder_two__part_0_bounds[0].x + (_cylinder_two__part_0_bounds[1].x - _cylinder_two__part_0_bounds[0].x) / 2
+                let _cylinder_two__part_0_y = _cylinder_two__part_0_bounds[0].y + (_cylinder_two__part_0_bounds[1].y - _cylinder_two__part_0_bounds[0].y) / 2
+                _cylinder_two__part_0 = translate([-_cylinder_two__part_0_x, -_cylinder_two__part_0_y, 0], _cylinder_two__part_0);
+                _cylinder_two__part_0 = rotate([90,0,0], _cylinder_two__part_0);
+                _cylinder_two__part_0 = translate([_cylinder_two__part_0_x, _cylinder_two__part_0_y, 0], _cylinder_two__part_0);
+
+                _cylinder_two__part_0 = translate([0,4,4], _cylinder_two__part_0);
+                let result = _cylinder_two__part_0;
+                
+            
+                    return result;
+                }
+            
+            
+
+                function _flat_square_case_fn() {
+                    
+
+                // creating part 0 of case _flat_square
+                let _flat_square__part_0 = _square_outline_fn();
+
+                // make sure that rotations are relative
+                let _flat_square__part_0_bounds = _flat_square__part_0.getBounds();
+                let _flat_square__part_0_x = _flat_square__part_0_bounds[0].x + (_flat_square__part_0_bounds[1].x - _flat_square__part_0_bounds[0].x) / 2
+                let _flat_square__part_0_y = _flat_square__part_0_bounds[0].y + (_flat_square__part_0_bounds[1].y - _flat_square__part_0_bounds[0].y) / 2
+                _flat_square__part_0 = translate([-_flat_square__part_0_x, -_flat_square__part_0_y, 0], _flat_square__part_0);
+                _flat_square__part_0 = rotate([0,0,0], _flat_square__part_0);
+                _flat_square__part_0 = translate([_flat_square__part_0_x, _flat_square__part_0_y, 0], _flat_square__part_0);
+
+                _flat_square__part_0 = translate([0,0,0], _flat_square__part_0);
+                let result = _flat_square__part_0;
+                
+            
+                    return result;
+                }
+            
+            
+
+                function combination_case_fn() {
+                    
+
+                // creating part 0 of case combination
+                let combination__part_0 = _subtract_case_fn();
+
+                // make sure that rotations are relative
+                let combination__part_0_bounds = combination__part_0.getBounds();
+                let combination__part_0_x = combination__part_0_bounds[0].x + (combination__part_0_bounds[1].x - combination__part_0_bounds[0].x) / 2
+                let combination__part_0_y = combination__part_0_bounds[0].y + (combination__part_0_bounds[1].y - combination__part_0_bounds[0].y) / 2
+                combination__part_0 = translate([-combination__part_0_x, -combination__part_0_y, 0], combination__part_0);
+                combination__part_0 = rotate([0,0,0], combination__part_0);
+                combination__part_0 = translate([combination__part_0_x, combination__part_0_y, 0], combination__part_0);
+
+                combination__part_0 = translate([0,0,0], combination__part_0);
+                let result = combination__part_0;
+                
+            
+
+                // creating part 1 of case combination
+                let combination__part_1 = _cylinder_two_case_fn();
+
+                // make sure that rotations are relative
+                let combination__part_1_bounds = combination__part_1.getBounds();
+                let combination__part_1_x = combination__part_1_bounds[0].x + (combination__part_1_bounds[1].x - combination__part_1_bounds[0].x) / 2
+                let combination__part_1_y = combination__part_1_bounds[0].y + (combination__part_1_bounds[1].y - combination__part_1_bounds[0].y) / 2
+                combination__part_1 = translate([-combination__part_1_x, -combination__part_1_y, 0], combination__part_1);
+                combination__part_1 = rotate([0,0,0], combination__part_1);
+                combination__part_1 = translate([combination__part_1_x, combination__part_1_y, 0], combination__part_1);
+
+                combination__part_1 = translate([0,0,0], combination__part_1);
+                result = result.intersect(combination__part_1);
+                
+            
+
+                // creating part 2 of case combination
+                let combination__part_2 = _flat_square_case_fn();
+
+                // make sure that rotations are relative
+                let combination__part_2_bounds = combination__part_2.getBounds();
+                let combination__part_2_x = combination__part_2_bounds[0].x + (combination__part_2_bounds[1].x - combination__part_2_bounds[0].x) / 2
+                let combination__part_2_y = combination__part_2_bounds[0].y + (combination__part_2_bounds[1].y - combination__part_2_bounds[0].y) / 2
+                combination__part_2 = translate([-combination__part_2_x, -combination__part_2_y, 0], combination__part_2);
+                combination__part_2 = rotate([0,0,0], combination__part_2);
+                combination__part_2 = translate([combination__part_2_x, combination__part_2_y, 0], combination__part_2);
+
+                combination__part_2 = translate([0,0,0], combination__part_2);
+                result = result.union(combination__part_2);
+                
+            
+                    return result;
+                }
+            
+            
+        
+            function main() {
+                return combination_case_fn();
+            }
+
+        

test/fixtures/minimal_kle.json

@@ -0,0 +1,15 @@
+[
+  [
+    "0_0",
+    "0_1"
+  ],
+  [
+    "1_0",
+    "1_1"
+  ],
+  [
+    "",
+    ""
+  ]
+]
+

test/footprints/choc.yaml

@@ -39,3 +39,13 @@ pcbs.pcb.footprints:
       reverse: true
       hotswap: true
     adjust.shift: [200, 0]
+
+  # all of keycaps, reverse and hotswap
+  - what: choc
+    params:
+      from: from
+      to: to
+      keycaps: true
+      reverse: true
+      hotswap: true
+    adjust.shift: [250, 0]

test/footprints/choc___pcbs_pcb.kicad_pcb

@@ -303,6 +303,58 @@
         
 
         
+      (module PG1350 (layer F.Cu) (tedit 5DD50112)
+      (at 250 0 0)
+
+      
+      (fp_text reference "S6" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
+      (fp_text value "" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
+
+      
+      (fp_line (start -7 -6) (end -7 -7) (layer Dwgs.User) (width 0.15))
+      (fp_line (start -7 7) (end -6 7) (layer Dwgs.User) (width 0.15))
+      (fp_line (start -6 -7) (end -7 -7) (layer Dwgs.User) (width 0.15))
+      (fp_line (start -7 7) (end -7 6) (layer Dwgs.User) (width 0.15))
+      (fp_line (start 7 6) (end 7 7) (layer Dwgs.User) (width 0.15))
+      (fp_line (start 7 -7) (end 6 -7) (layer Dwgs.User) (width 0.15))
+      (fp_line (start 6 7) (end 7 7) (layer Dwgs.User) (width 0.15))
+      (fp_line (start 7 -7) (end 7 -6) (layer Dwgs.User) (width 0.15))      
+      
+      
+      (pad "" np_thru_hole circle (at 0 0) (size 3.429 3.429) (drill 3.429) (layers *.Cu *.Mask))
+        
+      
+      (pad "" np_thru_hole circle (at 5.5 0) (size 1.7018 1.7018) (drill 1.7018) (layers *.Cu *.Mask))
+      (pad "" np_thru_hole circle (at -5.5 0) (size 1.7018 1.7018) (drill 1.7018) (layers *.Cu *.Mask))
+      
+        
+      
+      (fp_line (start -9 -8.5) (end 9 -8.5) (layer Dwgs.User) (width 0.15))
+      (fp_line (start 9 -8.5) (end 9 8.5) (layer Dwgs.User) (width 0.15))
+      (fp_line (start 9 8.5) (end -9 8.5) (layer Dwgs.User) (width 0.15))
+      (fp_line (start -9 8.5) (end -9 -8.5) (layer Dwgs.User) (width 0.15))
+      
+        
+          
+          (pad "" np_thru_hole circle (at 5 -3.75) (size 3 3) (drill 3) (layers *.Cu *.Mask))
+          (pad "" np_thru_hole circle (at 0 -5.95) (size 3 3) (drill 3) (layers *.Cu *.Mask))
+      
+          
+          (pad 1 smd rect (at -3.275 -5.95 0) (size 2.6 2.6) (layers B.Cu B.Paste B.Mask)  (net 1 "from"))
+          (pad 2 smd rect (at 8.275 -3.75 0) (size 2.6 2.6) (layers B.Cu B.Paste B.Mask)  (net 2 "to"))
+        
+        
+          
+          (pad "" np_thru_hole circle (at -5 -3.75) (size 3 3) (drill 3) (layers *.Cu *.Mask))
+          (pad "" np_thru_hole circle (at 0 -5.95) (size 3 3) (drill 3) (layers *.Cu *.Mask))
+      
+          
+          (pad 1 smd rect (at 3.275 -5.95 0) (size 2.6 2.6) (layers F.Cu F.Paste F.Mask)  (net 1 "from"))
+          (pad 2 smd rect (at -8.275 -3.75 0) (size 2.6 2.6) (layers F.Cu F.Paste F.Mask)  (net 2 "to"))
+        )
+        
+            
+            
 )
 
         

test/footprints/chocmini.yaml

@@ -22,3 +22,12 @@ pcbs.pcb.footprints:
       to: to
       reverse: true
     adjust.shift: [100, 0]
+
+  # reverse with keycap visualization
+  - what: chocmini
+    params:
+      from: from
+      to: to
+      keycaps: true
+      reverse: true
+    adjust.shift: [150, 0]

test/footprints/chocmini___pcbs_pcb.kicad_pcb

@@ -269,6 +269,67 @@
           
 
           
+        (module lib:Kailh_PG1232 (layer F.Cu) (tedit 5E1ADAC2)
+        (at 150 0 0) 
+
+                
+        (fp_text reference "S4" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
+        (fp_text value Kailh_PG1232 (at 0 -7.3) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))))
+
+        
+        (fp_line (start -7.25 -6.75) (end -6.25 -6.75) (layer Dwgs.User) (width 0.15))
+        (fp_line (start -7.25 -6.75) (end -7.25 -5.75) (layer Dwgs.User) (width 0.15))
+
+        (fp_line (start -7.25 6.75) (end -6.25 6.75) (layer Dwgs.User) (width 0.15))
+        (fp_line (start -7.25 6.75) (end -7.25 5.75) (layer Dwgs.User) (width 0.15))
+
+        (fp_line (start 7.25 -6.75) (end 6.25 -6.75) (layer Dwgs.User) (width 0.15))
+        (fp_line (start 7.25 -6.75) (end 7.25 -5.75) (layer Dwgs.User) (width 0.15))
+
+        (fp_line (start 7.25 6.75) (end 6.25 6.75) (layer Dwgs.User) (width 0.15))
+        (fp_line (start 7.25 6.75) (end 7.25 5.75) (layer Dwgs.User) (width 0.15))
+
+
+        (fp_line (start 2.8 -5.35) (end -2.8 -5.35) (layer Dwgs.User) (width 0.15))
+        (fp_line (start -2.8 -3.2) (end 2.8 -3.2) (layer Dwgs.User) (width 0.15))
+        (fp_line (start 2.8 -3.2) (end 2.8 -5.35) (layer Dwgs.User) (width 0.15))
+        (fp_line (start -2.8 -3.2) (end -2.8 -5.35) (layer Dwgs.User) (width 0.15))
+        
+                	 
+        (fp_line (start 2.25 2.6) (end 5.8 2.6) (layer Edge.Cuts) (width 0.12))
+        (fp_line (start -2.25 2.6) (end -5.8 2.6) (layer Edge.Cuts) (width 0.12))
+        (fp_line (start 2.25 3.6) (end 2.25 2.6) (layer Edge.Cuts) (width 0.12))
+        (fp_line (start -2.25 3.6) (end 2.25 3.6) (layer Edge.Cuts) (width 0.12))
+        (fp_line (start -2.25 2.6) (end -2.25 3.6) (layer Edge.Cuts) (width 0.12))
+        (fp_line (start -5.8 2.6) (end -5.8 -2.95) (layer Edge.Cuts) (width 0.12))
+        (fp_line (start 5.8 -2.95) (end 5.8 2.6) (layer Edge.Cuts) (width 0.12))
+        (fp_line (start -5.8 -2.95) (end 5.8 -2.95) (layer Edge.Cuts) (width 0.12))
+        
+            
+        (pad 3 thru_hole circle (at 5.3 -4.75) (size 1.6 1.6) (drill 1.1) (layers *.Cu *.Mask) (clearance 0.2))
+        (pad 4 thru_hole circle (at -5.3 -4.75) (size 1.6 1.6) (drill 1.1) (layers *.Cu *.Mask) (clearance 0.2))
+      
+          
+        
+        (fp_line (start -9 -8.5) (end 9 -8.5) (layer Dwgs.User) (width 0.15))
+        (fp_line (start 9 -8.5) (end 9 8.5) (layer Dwgs.User) (width 0.15))
+        (fp_line (start 9 8.5) (end -9 8.5) (layer Dwgs.User) (width 0.15))
+        (fp_line (start -9 8.5) (end -9 -8.5) (layer Dwgs.User) (width 0.15))
+        
+          
+        
+        (pad 1 thru_hole circle (at -4.58 5.1) (size 1.6 1.6) (drill 1.1) (layers *.Cu *.Mask) (net 1 "from") (clearance 0.2))
+        (pad 2 thru_hole circle (at 2 5.4) (size 1.6 1.6) (drill 1.1) (layers *.Cu *.Mask) (net 2 "to") (clearance 0.2))
+			  
+          
+        
+        (pad 1 thru_hole circle (at 4.58 5.1) (size 1.6 1.6) (drill 1.1) (layers *.Cu *.Mask) (net 1 "from") (clearance 0.2))
+        (pad 2 thru_hole circle (at -2 5.4) (size 1.6 1.6) (drill 1.1) (layers *.Cu *.Mask) (net 2 "to") (clearance 0.2))
+			  )
+
+          
+            
+            
 )
 
         

test/footprints/mx.yaml

@@ -39,3 +39,13 @@ pcbs.pcb.footprints:
       reverse: true
       hotswap: true
     adjust.shift: [200, 0]
+
+  # all of keycaps, reverse and hotswap
+  - what: mx
+    params:
+      from: from
+      to: to
+      keycaps: true
+      reverse: true
+      hotswap: true
+    adjust.shift: [250, 0]

test/footprints/mx___pcbs_pcb.kicad_pcb

@@ -303,6 +303,58 @@
         
 
         
+      (module MX (layer F.Cu) (tedit 5DD4F656)
+      (at 250 0 0)
+
+      
+      (fp_text reference "S6" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
+      (fp_text value "" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
+
+      
+      (fp_line (start -7 -6) (end -7 -7) (layer Dwgs.User) (width 0.15))
+      (fp_line (start -7 7) (end -6 7) (layer Dwgs.User) (width 0.15))
+      (fp_line (start -6 -7) (end -7 -7) (layer Dwgs.User) (width 0.15))
+      (fp_line (start -7 7) (end -7 6) (layer Dwgs.User) (width 0.15))
+      (fp_line (start 7 6) (end 7 7) (layer Dwgs.User) (width 0.15))
+      (fp_line (start 7 -7) (end 6 -7) (layer Dwgs.User) (width 0.15))
+      (fp_line (start 6 7) (end 7 7) (layer Dwgs.User) (width 0.15))
+      (fp_line (start 7 -7) (end 7 -6) (layer Dwgs.User) (width 0.15))
+    
+      
+      (pad "" np_thru_hole circle (at 0 0) (size 3.9878 3.9878) (drill 3.9878) (layers *.Cu *.Mask))
+
+      
+      (pad "" np_thru_hole circle (at 5.08 0) (size 1.7018 1.7018) (drill 1.7018) (layers *.Cu *.Mask))
+      (pad "" np_thru_hole circle (at -5.08 0) (size 1.7018 1.7018) (drill 1.7018) (layers *.Cu *.Mask))
+      
+        
+      
+      (fp_line (start -9.5 -9.5) (end 9.5 -9.5) (layer Dwgs.User) (width 0.15))
+      (fp_line (start 9.5 -9.5) (end 9.5 9.5) (layer Dwgs.User) (width 0.15))
+      (fp_line (start 9.5 9.5) (end -9.5 9.5) (layer Dwgs.User) (width 0.15))
+      (fp_line (start -9.5 9.5) (end -9.5 -9.5) (layer Dwgs.User) (width 0.15))
+      
+        
+        
+        (pad "" np_thru_hole circle (at 2.54 -5.08) (size 3 3) (drill 3) (layers *.Cu *.Mask))
+        (pad "" np_thru_hole circle (at -3.81 -2.54) (size 3 3) (drill 3) (layers *.Cu *.Mask))
+        
+        
+        (pad 1 smd rect (at -7.085 -2.54 0) (size 2.55 2.5) (layers B.Cu B.Paste B.Mask) (net 1 "from"))
+        (pad 2 smd rect (at 5.842 -5.08 0) (size 2.55 2.5) (layers B.Cu B.Paste B.Mask) (net 2 "to"))
+        
+        
+        
+        (pad "" np_thru_hole circle (at -2.54 -5.08) (size 3 3) (drill 3) (layers *.Cu *.Mask))
+        (pad "" np_thru_hole circle (at 3.81 -2.54) (size 3 3) (drill 3) (layers *.Cu *.Mask))
+        
+        
+        (pad 1 smd rect (at 7.085 -2.54 0) (size 2.55 2.5) (layers F.Cu F.Paste F.Mask) (net 1 "from"))
+        (pad 2 smd rect (at -5.842 -5.08 0) (size 2.55 2.5) (layers F.Cu F.Paste F.Mask) (net 2 "to"))
+        )
+        
+            
+            
 )
 
         

test/footprints/pad.yaml

@@ -25,3 +25,17 @@ pcbs.pcb.footprints:
       align: down
       mirrored: true
     adjust.shift: [50, 50]
+
+  - what: pad
+    params:
+      net: net
+      align: right
+      mirrored: true
+    adjust.shift: [100, 0]
+
+  - what: pad
+    params:
+      net: net
+      align: left
+      mirrored: true
+    adjust.shift: [100, 50]

test/footprints/pad___pcbs_pcb.kicad_pcb

@@ -183,6 +183,44 @@
         
 
     
+        (module SMDPad (layer F.Cu) (tedit 5B24D78E)
+
+            (at 100 0 0)
+
+            
+            (fp_text reference "PAD5" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
+            (fp_text value "" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
+            
+            
+            (pad 1 smd rect (at 0 0 0) (size 1 1) (layers F.Cu F.Paste F.Mask) (net 1 "net"))
+
+            (pad 1 smd rect (at 0 0 0) (size 1 1) (layers B.Cu B.Paste B.Mask) (net 1 "net"))
+
+            
+        )
+    
+        
+
+    
+        (module SMDPad (layer F.Cu) (tedit 5B24D78E)
+
+            (at 100 -50 0)
+
+            
+            (fp_text reference "PAD6" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
+            (fp_text value "" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
+            
+            
+            (pad 1 smd rect (at 0 0 0) (size 1 1) (layers F.Cu F.Paste F.Mask) (net 1 "net"))
+
+            (pad 1 smd rect (at 0 0 0) (size 1 1) (layers B.Cu B.Paste B.Mask) (net 1 "net"))
+
+            
+        )
+    
+        
+            
+            
 )
 
         

test/footprints/rest.yaml

@@ -65,3 +65,21 @@ pcbs.pcb.footprints:
     params:
       net: net
     adjust.shift: [0, 150]
+
+  - what: scrollwheel
+    params:
+      from: from
+      to: to
+      A: A
+      B: B
+      C: C
+      D: D
+      reverse: true
+    adjust.shift: [50, 150]
+
+  - what: slider
+    params:
+      from: from
+      to: to
+      side: B
+    adjust.shift: [100, 150]

test/footprints/rest___pcbs_pcb.kicad_pcb

@@ -426,6 +426,104 @@
     
 
         
+        (module RollerEncoder_Panasonic_EVQWGD001 (layer F.Cu) (tedit 6040A10C)
+        (at 50 -150 0)   
+        (fp_text reference REF** (at 0 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))))
+        (fp_text value RollerEncoder_Panasonic_EVQWGD001 (at -0.1 9 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))))
+        
+        
+        (fp_line (start -8.4 -6.4) (end 8.4 -6.4) (layer Dwgs.User) (width 0.12))
+        (fp_line (start 8.4 -6.4) (end 8.4 7.4) (layer Dwgs.User) (width 0.12))
+        (fp_line (start 8.4 7.4) (end -8.4 7.4) (layer Dwgs.User) (width 0.12))
+        (fp_line (start -8.4 7.4) (end -8.4 -6.4) (layer Dwgs.User) (width 0.12))
+      
+        
+          
+          (fp_line (start 9.8 7.3) (end 9.8 -6.3) (layer Edge.Cuts) (width 0.15))
+          (fp_line (start 7.4 -6.3) (end 7.4 7.3) (layer Edge.Cuts) (width 0.15))
+          (fp_line (start 9.5 -6.6) (end 7.7 -6.6) (layer Edge.Cuts) (width 0.15))
+          (fp_line (start 7.7 7.6) (end 9.5 7.6) (layer Edge.Cuts) (width 0.15))
+          (fp_arc (start 7.7 7.3) (end 7.4 7.3) (angle -90) (layer Edge.Cuts) (width 0.15))
+          (fp_arc (start 9.5 7.3) (end 9.5 7.6) (angle -90) (layer Edge.Cuts) (width 0.15))
+          (fp_arc (start 7.7 -6.3) (end 7.7 -6.6) (angle -90) (layer Edge.Cuts) (width 0.15))
+          (fp_arc (start 9.5 -6.3) (end 9.8 -6.3) (angle -90) (layer Edge.Cuts) (width 0.15))
+
+          
+          (pad S1 thru_hole circle (at -6.85 -6.2 0) (size 1.6 1.6) (drill 0.9) (layers *.Cu *.Mask) (net 1 "from"))
+          (pad S2 thru_hole circle (at -5 -6.2 0) (size 1.6 1.6) (drill 0.9) (layers *.Cu *.Mask) (net 2 "to"))
+          (pad A thru_hole circle (at -5.625 -3.81 0) (size 1.6 1.6) (drill 0.9) (layers *.Cu *.Mask) (net 11 "A"))
+          (pad B thru_hole circle (at -5.625 -1.27 0) (size 1.6 1.6) (drill 0.9) (layers *.Cu *.Mask) (net 12 "B"))
+          (pad C thru_hole circle (at -5.625 1.27 0) (size 1.6 1.6) (drill 0.9) (layers *.Cu *.Mask) (net 13 "C"))
+          (pad D thru_hole circle (at -5.625 3.81 0) (size 1.6 1.6) (drill 0.9) (layers *.Cu *.Mask) (net 14 "D"))
+
+          
+          (pad "" np_thru_hole circle (at -5.625 6.3 0) (size 1.5 1.5) (drill 1.5) (layers *.Cu *.Mask))
+        
+        
+          
+          (fp_line (start -9.8 7.3) (end -9.8 -6.3) (layer Edge.Cuts) (width 0.15))
+          (fp_line (start -7.4 -6.3) (end -7.4 7.3) (layer Edge.Cuts) (width 0.15))
+          (fp_line (start -9.5 -6.6) (end -7.7 -6.6) (layer Edge.Cuts) (width 0.15))
+          (fp_line (start -7.7 7.6) (end -9.5 7.6) (layer Edge.Cuts) (width 0.15))
+          (fp_arc (start -7.7 7.3) (end -7.4 7.3) (angle 90) (layer Edge.Cuts) (width 0.15))
+          (fp_arc (start -9.5 7.3) (end -9.5 7.6) (angle 90) (layer Edge.Cuts) (width 0.15))
+          (fp_arc (start -7.7 -6.3) (end -7.7 -6.6) (angle 90) (layer Edge.Cuts) (width 0.15))
+          (fp_arc (start -9.5 -6.3) (end -9.8 -6.3) (angle 90) (layer Edge.Cuts) (width 0.15))
+
+          
+          (pad S1 thru_hole circle (at 6.85 -6.2 0) (size 1.6 1.6) (drill 0.9) (layers *.Cu *.Mask) (net 1 "from"))
+          (pad S2 thru_hole circle (at 5 -6.2 0) (size 1.6 1.6) (drill 0.9) (layers *.Cu *.Mask) (net 2 "to"))
+          (pad A thru_hole circle (at 5.625 -3.81 0) (size 1.6 1.6) (drill 0.9) (layers *.Cu *.Mask) (net 11 "A"))
+          (pad B thru_hole circle (at 5.625 -1.27 0) (size 1.6 1.6) (drill 0.9) (layers *.Cu *.Mask) (net 12 "B"))
+          (pad C thru_hole circle (at 5.625 1.27 0) (size 1.6 1.6) (drill 0.9) (layers *.Cu *.Mask) (net 13 "C"))
+          (pad D thru_hole circle (at 5.625 3.81 0) (size 1.6 1.6) (drill 0.9) (layers *.Cu *.Mask) (net 14 "D"))
+
+          
+          (pad "" np_thru_hole circle (at 5.625 6.3 0) (size 1.5 1.5) (drill 1.5) (layers *.Cu *.Mask))
+        )
+        
+
+        
+        (module E73:SPDT_C128955 (layer F.Cu) (tstamp 5BF2CC3C)
+
+            (at 100 -150 0)
+
+            
+            (fp_text reference "T2" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
+            (fp_text value "" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
+            
+            
+            (fp_line (start 1.95 -1.35) (end -1.95 -1.35) (layer B.SilkS) (width 0.15))
+            (fp_line (start 0 -1.35) (end -3.3 -1.35) (layer B.SilkS) (width 0.15))
+            (fp_line (start -3.3 -1.35) (end -3.3 1.5) (layer B.SilkS) (width 0.15))
+            (fp_line (start -3.3 1.5) (end 3.3 1.5) (layer B.SilkS) (width 0.15))
+            (fp_line (start 3.3 1.5) (end 3.3 -1.35) (layer B.SilkS) (width 0.15))
+            (fp_line (start 0 -1.35) (end 3.3 -1.35) (layer B.SilkS) (width 0.15))
+            
+            
+            (fp_line (start -1.95 -3.85) (end 1.95 -3.85) (layer Dwgs.User) (width 0.15))
+            (fp_line (start 1.95 -3.85) (end 1.95 -1.35) (layer Dwgs.User) (width 0.15))
+            (fp_line (start -1.95 -1.35) (end -1.95 -3.85) (layer Dwgs.User) (width 0.15))
+            
+            
+            (pad "" np_thru_hole circle (at 1.5 0) (size 1 1) (drill 0.9) (layers *.Cu *.Mask))
+            (pad "" np_thru_hole circle (at -1.5 0) (size 1 1) (drill 0.9) (layers *.Cu *.Mask))
+
+            
+            (pad 1 smd rect (at -2.25 2.075 0) (size 0.9 1.25) (layers B.Cu B.Paste B.Mask) (net 1 "from"))
+            (pad 2 smd rect (at 0.75 2.075 0) (size 0.9 1.25) (layers B.Cu B.Paste B.Mask) (net 2 "to"))
+            (pad 3 smd rect (at 2.25 2.075 0) (size 0.9 1.25) (layers B.Cu B.Paste B.Mask))
+            
+            
+            (pad "" smd rect (at 3.7 -1.1 0) (size 0.9 0.9) (layers B.Cu B.Paste B.Mask))
+            (pad "" smd rect (at 3.7 1.1 0) (size 0.9 0.9) (layers B.Cu B.Paste B.Mask))
+            (pad "" smd rect (at -3.7 1.1 0) (size 0.9 0.9) (layers B.Cu B.Paste B.Mask))
+            (pad "" smd rect (at -3.7 -1.1 0) (size 0.9 0.9) (layers B.Cu B.Paste B.Mask))
+        )
+        
+        
+            
+            
 )
 
         

test/helpers/mock_footprints.js

@@ -3,6 +3,7 @@ exports.inject = (ergogen) => {
         params: {
             designator: 'T',
             side: 'F',
+            width: 0.25,
             P1: {type: 'net', value: 'P1'}
         },
         body: p => {
@@ -20,7 +21,7 @@ exports.inject = (ergogen) => {
 
                 )
 
-                (segment (start ${p.sxy(0, 0)}) (end ${p.sxy(5, 5)}) (width 0.25) (layer ${p.side}.Cu) (net ${p.P1.index}))
+                (segment (start ${p.sxy(0, 0)}) (end ${p.sxy(5, 5)}) (width ${p.width}) (layer ${p.side}.Cu) (net ${p.P1.index}))
 
             `
         }
@@ -106,7 +107,7 @@ exports.inject = (ergogen) => {
         }
     })
 
-    ergogen.inject('footprint', 'references_test', {
+    ergogen.inject('references_test', {
         params: {},
         body: p => {
             return `references ${p.ref_hide ? 'hidden' : 'shown'}`

test/index.js

@@ -55,10 +55,16 @@ const test = function(input_path) {
                 } else {
                     fs.writeJSONSync(expected_path, output_part, {spaces: 4})
                 }
+            } else {
+                if (a.type(output_part)() == 'string') {
+                  const parse_out = output_part.replace(/(?:\r\n|\r|\n)/g,"\n")
+                  const parse_exp = expected.replace(/(?:\r\n|\r|\n)/g,"\n")
+                  parse_out.should.deep.equal(parse_exp)
                 } else {
                   output_part.should.deep.equal(expected)
                 }
             }
+        }
     })
 }
 
@@ -133,14 +139,19 @@ for (let w of cli_what) {
                         ref_path = path.resolve(path.join(t, read(ref_path).trim()))
                     }
                     const comp_res = dircompare.compareSync(output_path, ref_path, {
-                        compareContent: true
+                        compareContent: true,
+                        compareFileSync: dircompare.fileCompareHandlers.lineBasedFileCompare.compareSync,
+                        compareFileAsync: dircompare.fileCompareHandlers.lineBasedFileCompare.compareAsync,
+                        ignoreLineEnding: true
                     })
                     if (dump) {
                         fs.moveSync(output_path, ref_path, {overwrite: true})
                     } else {
                         fs.removeSync(output_path)
                     }
-                    actual_log.should.equal(ref_log)
+                    const parse_act_log = actual_log.replace(/(?:\r\n|\r|\n)/g,"\n")
+                    const parse_ref_log = ref_log.replace(/(?:\r\n|\r|\n)/g,"\n")
+                    parse_act_log.should.equal(parse_ref_log)
                     comp_res.same.should.be.true
                 // deliberately incorrect execution
                 } else {

test/outlines/binding.yaml

@@ -0,0 +1,18 @@
+points:
+  zones:
+    matrix:
+      mirror:
+        ref: matrix_only_first
+        distance: 30
+      columns:
+        only.rows:
+          first.bind: 0
+          second.bind: [0,10,0,10]
+          third.bind: [10,0,10,0]
+          fourth.bind: [u, u/2, u/3, u/4]
+outlines:
+  bound:
+    - what: rectangle
+      where: true
+      size: 20
+      bound: true

test/outlines/binding___outlines_bound_dxf.dxf

@@ -0,0 +1,338 @@
+0
+SECTION
+2
+HEADER
+9
+$INSUNITS
+70
+4
+0
+ENDSEC
+0
+SECTION
+2
+TABLES
+0
+TABLE
+2
+LTYPE
+0
+LTYPE
+72
+65
+70
+64
+2
+CONTINUOUS
+3
+______
+73
+0
+40
+0
+0
+ENDTAB
+0
+TABLE
+2
+LAYER
+0
+ENDTAB
+0
+ENDSEC
+0
+SECTION
+2
+ENTITIES
+0
+LINE
+8
+0
+10
+-10
+20
+-10
+11
+10
+21
+-10
+0
+LINE
+8
+0
+10
+10
+20
+-10
+11
+10
+21
+9
+0
+LINE
+8
+0
+10
+-10
+20
+9
+11
+-10
+21
+-10
+0
+LINE
+8
+0
+10
+10
+20
+29
+11
+20
+21
+29
+0
+LINE
+8
+0
+10
+20
+20
+9
+11
+10
+21
+9
+0
+LINE
+8
+0
+10
+-10
+20
+9
+11
+-20
+21
+9
+0
+LINE
+8
+0
+10
+-20
+20
+9
+11
+-20
+21
+29
+0
+LINE
+8
+0
+10
+-20
+20
+29
+11
+-10
+21
+29
+0
+LINE
+8
+0
+10
+10
+20
+29
+11
+10
+21
+40.6666667
+0
+LINE
+8
+0
+10
+-10
+20
+29
+11
+-10
+21
+40.6666667
+0
+LINE
+8
+0
+10
+-14.75
+20
+86
+11
+44.75
+21
+86
+0
+LINE
+8
+0
+10
+10
+20
+40.6666667
+11
+20
+21
+40.6666667
+0
+LINE
+8
+0
+10
+-10
+20
+40.6666667
+11
+-14.75
+21
+40.6666667
+0
+LINE
+8
+0
+10
+-14.75
+20
+40.6666667
+11
+-14.75
+21
+86
+0
+LINE
+8
+0
+10
+20
+20
+-10
+11
+40
+21
+-10
+0
+LINE
+8
+0
+10
+40
+20
+-10
+11
+40
+21
+9
+0
+LINE
+8
+0
+10
+20
+20
+9
+11
+20
+21
+-10
+0
+LINE
+8
+0
+10
+40
+20
+29
+11
+50
+21
+29
+0
+LINE
+8
+0
+10
+50
+20
+9
+11
+50
+21
+29
+0
+LINE
+8
+0
+10
+50
+20
+9
+11
+40
+21
+9
+0
+LINE
+8
+0
+10
+40
+20
+29
+11
+40
+21
+40.6666667
+0
+LINE
+8
+0
+10
+20
+20
+29
+11
+20
+21
+40.6666667
+0
+LINE
+8
+0
+10
+44.75
+20
+40.6666667
+11
+44.75
+21
+86
+0
+LINE
+8
+0
+10
+44.75
+20
+40.6666667
+11
+40
+21
+40.6666667
+0
+ENDSEC
+0
+EOF

test/outlines/outlines.yaml

@@ -17,10 +17,15 @@ outlines:
       size: cy
       bound: true
   fillet:
-    - what: outline
-      name: base
+    - name: base
       fillet: 2
   scale:
-    - what: outline
-      name: fillet
+    - name: fillet
       scale: 0.5
+  combination:
+    - "base"
+    - "-scale"
+    - "~fillet"
+  expand:
+    - name: combination
+      expand: 1

test/outlines/outlines___outlines_combination_dxf.dxf

@@ -0,0 +1,514 @@
+0
+SECTION
+2
+HEADER
+9
+$INSUNITS
+70
+4
+0
+ENDSEC
+0
+SECTION
+2
+TABLES
+0
+TABLE
+2
+LTYPE
+0
+LTYPE
+72
+65
+70
+64
+2
+CONTINUOUS
+3
+______
+73
+0
+40
+0
+0
+ENDTAB
+0
+TABLE
+2
+LAYER
+0
+ENDTAB
+0
+ENDSEC
+0
+SECTION
+2
+ENTITIES
+0
+LINE
+8
+0
+10
+8.6
+20
+-6.6
+11
+8.6
+21
+-4.3
+0
+LINE
+8
+0
+10
+8.6
+20
+12.8
+11
+8.6
+21
+23.6
+0
+LINE
+8
+0
+10
+-6.6
+20
+-8.6
+11
+6.6
+21
+-8.6
+0
+LINE
+8
+0
+10
+-8.6
+20
+-6.6
+11
+-8.6
+21
+23.6
+0
+LINE
+8
+0
+10
+-6.6
+20
+25.6
+11
+6.6
+21
+25.6
+0
+LINE
+8
+0
+10
+27.6
+20
+-6.6
+11
+27.6
+21
+23.6
+0
+LINE
+8
+0
+10
+12.4
+20
+-8.6
+11
+25.6
+21
+-8.6
+0
+LINE
+8
+0
+10
+10.4
+20
+-6.6
+11
+10.4
+21
+-4.3
+0
+LINE
+8
+0
+10
+10.4
+20
+12.8
+11
+10.4
+21
+23.6
+0
+LINE
+8
+0
+10
+12.4
+20
+25.6
+11
+25.6
+21
+25.6
+0
+LINE
+8
+0
+10
+4.3
+20
+-3.3
+11
+4.3
+21
+11.8
+0
+LINE
+8
+0
+10
+-3.3
+20
+-4.3
+11
+3.3
+21
+-4.3
+0
+LINE
+8
+0
+10
+-4.3
+20
+-3.3
+11
+-4.3
+21
+11.8
+0
+LINE
+8
+0
+10
+-3.3
+20
+12.8
+11
+3.3
+21
+12.8
+0
+LINE
+8
+0
+10
+13.8
+20
+-3.3
+11
+13.8
+21
+11.8
+0
+LINE
+8
+0
+10
+6.2
+20
+-4.3
+11
+8.6
+21
+-4.3
+0
+LINE
+8
+0
+10
+10.4
+20
+-4.3
+11
+12.8
+21
+-4.3
+0
+LINE
+8
+0
+10
+5.2
+20
+-3.3
+11
+5.2
+21
+11.8
+0
+LINE
+8
+0
+10
+6.2
+20
+12.8
+11
+8.6
+21
+12.8
+0
+LINE
+8
+0
+10
+10.4
+20
+12.8
+11
+12.8
+21
+12.8
+0
+ARC
+8
+0
+10
+3.3
+20
+11.8
+40
+1
+50
+0
+51
+90
+0
+ARC
+8
+0
+10
+-3.3
+20
+11.8
+40
+1
+50
+90
+51
+180
+0
+ARC
+8
+0
+10
+-3.3
+20
+-3.3
+40
+1
+50
+180
+51
+270
+0
+ARC
+8
+0
+10
+3.3
+20
+-3.3
+40
+1
+50
+270
+51
+0
+0
+ARC
+8
+0
+10
+12.8
+20
+11.8
+40
+1
+50
+0
+51
+90
+0
+ARC
+8
+0
+10
+6.2
+20
+11.8
+40
+1
+50
+90
+51
+180
+0
+ARC
+8
+0
+10
+6.2
+20
+-3.3
+40
+1
+50
+180
+51
+270
+0
+ARC
+8
+0
+10
+12.8
+20
+-3.3
+40
+1
+50
+270
+51
+0
+0
+ARC
+8
+0
+10
+6.6
+20
+23.6
+40
+2
+50
+0
+51
+90
+0
+ARC
+8
+0
+10
+-6.6
+20
+23.6
+40
+2
+50
+90
+51
+180
+0
+ARC
+8
+0
+10
+-6.6
+20
+-6.6
+40
+2
+50
+180
+51
+270
+0
+ARC
+8
+0
+10
+6.6
+20
+-6.6
+40
+2
+50
+270
+51
+0
+0
+ARC
+8
+0
+10
+25.6
+20
+23.6
+40
+2
+50
+0
+51
+90
+0
+ARC
+8
+0
+10
+12.4
+20
+23.6
+40
+2
+50
+90
+51
+180
+0
+ARC
+8
+0
+10
+12.4
+20
+-6.6
+40
+2
+50
+180
+51
+270
+0
+ARC
+8
+0
+10
+25.6
+20
+-6.6
+40
+2
+50
+270
+51
+0
+0
+ENDSEC
+0
+EOF

test/outlines/outlines___outlines_expand_dxf.dxf

@@ -0,0 +1,410 @@
+0
+SECTION
+2
+HEADER
+9
+$INSUNITS
+70
+4
+0
+ENDSEC
+0
+SECTION
+2
+TABLES
+0
+TABLE
+2
+LTYPE
+0
+LTYPE
+72
+65
+70
+64
+2
+CONTINUOUS
+3
+______
+73
+0
+40
+0
+0
+ENDTAB
+0
+TABLE
+2
+LAYER
+0
+ENDTAB
+0
+ENDSEC
+0
+SECTION
+2
+ENTITIES
+0
+LINE
+8
+0
+10
+-6.6
+20
+-9.6
+11
+6.6
+21
+-9.6
+0
+ARC
+8
+0
+10
+6.6
+20
+-6.6
+40
+3
+50
+270
+51
+345.164888
+0
+ARC
+8
+0
+10
+12.4
+20
+-6.6
+40
+3
+50
+194.835112
+51
+270
+0
+LINE
+8
+0
+10
+12.4
+20
+-9.6
+11
+25.6
+21
+-9.6
+0
+ARC
+8
+0
+10
+25.6
+20
+-6.6
+40
+3
+50
+270
+51
+360
+0
+LINE
+8
+0
+10
+28.6
+20
+-6.6
+11
+28.6
+21
+23.6
+0
+ARC
+8
+0
+10
+25.6
+20
+23.6
+40
+3
+50
+0
+51
+90
+0
+LINE
+8
+0
+10
+12.4
+20
+26.6
+11
+25.6
+21
+26.6
+0
+ARC
+8
+0
+10
+12.4
+20
+23.6
+40
+3
+50
+90
+51
+165.164888
+0
+ARC
+8
+0
+10
+6.6
+20
+23.6
+40
+3
+50
+14.835112
+51
+90
+0
+LINE
+8
+0
+10
+-6.6
+20
+26.6
+11
+6.6
+21
+26.6
+0
+ARC
+8
+0
+10
+-6.6
+20
+23.6
+40
+3
+50
+90
+51
+180
+0
+LINE
+8
+0
+10
+-9.6
+20
+-6.6
+11
+-9.6
+21
+23.6
+0
+ARC
+8
+0
+10
+-6.6
+20
+-6.6
+40
+3
+50
+180
+51
+270
+0
+LINE
+8
+0
+10
+12.8
+20
+-3.3
+11
+12.8
+21
+11.8
+0
+LINE
+8
+0
+10
+10.4
+20
+11.8
+11
+12.8
+21
+11.8
+0
+ARC
+8
+0
+10
+10.4
+20
+12.8
+40
+1
+50
+205.8419331
+51
+270
+0
+ARC
+8
+0
+10
+8.6
+20
+12.8
+40
+1
+50
+270
+51
+334.1580669
+0
+LINE
+8
+0
+10
+6.2
+20
+11.8
+11
+8.6
+21
+11.8
+0
+LINE
+8
+0
+10
+6.2
+20
+-3.3
+11
+6.2
+21
+11.8
+0
+LINE
+8
+0
+10
+6.2
+20
+-3.3
+11
+8.6
+21
+-3.3
+0
+ARC
+8
+0
+10
+8.6
+20
+-4.3
+40
+1
+50
+25.8419331
+51
+90
+0
+ARC
+8
+0
+10
+10.4
+20
+-4.3
+40
+1
+50
+90
+51
+154.1580669
+0
+LINE
+8
+0
+10
+10.4
+20
+-3.3
+11
+12.8
+21
+-3.3
+0
+LINE
+8
+0
+10
+3.3
+20
+-3.3
+11
+3.3
+21
+11.8
+0
+LINE
+8
+0
+10
+-3.3
+20
+11.8
+11
+3.3
+21
+11.8
+0
+LINE
+8
+0
+10
+-3.3
+20
+-3.3
+11
+-3.3
+21
+11.8
+0
+LINE
+8
+0
+10
+-3.3
+20
+-3.3
+11
+3.3
+21
+-3.3
+0
+ENDSEC
+0
+EOF

test/outlines/rectangles.yaml

@@ -17,6 +17,7 @@ outlines:
           - mirror_matrix
         shift: [0, sy/2]
       size: [20, 40]
+      corner: 5
     outside_rects:
       what: rectangle
       where:

test/outlines/rectangles___outlines_outline_dxf.dxf

@@ -67,7 +67,7 @@ LINE
 11
 10
 21
-0
+5
 0
 LINE
 8
@@ -135,7 +135,7 @@ LINE
 10
 30
 20
-0
+5
 11
 30
 21
@@ -145,14 +145,28 @@ LINE
 8
 0
 10
-10
+15
 20
 0
 11
-30
+25
 21
 0
 0
+ARC
+8
+0
+10
+25
+20
+5
+40
+5
+50
+270
+51
+360
+0
 LINE
 8
 0
@@ -163,32 +177,74 @@ LINE
 11
 30
 21
+35
+0
+ARC
+8
+0
+10
+25
+20
+35
 40
+5
+50
+0
+51
+90
 0
 LINE
 8
 0
 10
-30
+25
 20
 40
 11
-10
+15
 21
 40
 0
+ARC
+8
+0
+10
+15
+20
+35
+40
+5
+50
+90
+51
+180
+0
 LINE
 8
 0
 10
 10
 20
-40
+35
 11
 10
 21
 10
 0
+ARC
+8
+0
+10
+15
+20
+5
+40
+5
+50
+180
+51
+270
+0
 LINE
 8
 0

test/pcbs/mock_footprints.yaml

@@ -18,6 +18,7 @@ pcbs:
           shift: [1, 1]
           rotate: 30
         params:
+          width: u/40
           side: F
           mirror:
             side: B
@@ -28,9 +29,13 @@ pcbs:
           rotate: 30
       dyn:
         what: dynamic_net_test
-      anc:
+      anc1:
         what: anchor_test
         params:
           end:
             ref: matrix
             shift: [10, 10]
+      anc2:
+        what: anchor_test
+        params:
+          end: matrix

test/pcbs/mock_footprints___pcbs_main.kicad_pcb

@@ -126,7 +126,7 @@
 
                 )
 
-                (segment (start 1 -1) (end 7.830127 0.8301270000000001) (width 0.25) (layer F.Cu) (net 1))
+                (segment (start 1 -1) (end 7.830127 0.8301270000000001) (width 0.475) (layer F.Cu) (net 1))
 
             
 
@@ -143,7 +143,7 @@
 
                 )
 
-                (segment (start 19 -1) (end 12.169872999999999 0.8301270000000001) (width 0.25) (layer B.Cu) (net 1))
+                (segment (start 19 -1) (end 12.169872999999999 0.8301270000000001) (width 0.475) (layer B.Cu) (net 1))
 
             
 
@@ -160,7 +160,7 @@
 
                 )
 
-                (segment (start 19 -1) (end 12.169872999999999 0.8301270000000001) (width 0.25) (layer B.Cu) (net 1))
+                (segment (start 19 -1) (end 12.169872999999999 0.8301270000000001) (width 0.475) (layer B.Cu) (net 1))
 
             
 
@@ -177,7 +177,7 @@
 
                 )
 
-                (segment (start 1 -1) (end 7.830127 0.8301270000000001) (width 0.25) (layer F.Cu) (net 1))
+                (segment (start 1 -1) (end 7.830127 0.8301270000000001) (width 0.475) (layer F.Cu) (net 1))
 
             
 
@@ -231,6 +231,17 @@
                 )
 
             
+ 
+
+                (module anchor_test (layer F.Cu) (tedit 5CF31DEF)
+
+                    (at 0 0 0)
+
+                    (fp_line (start 0 0) (end 0 0) (layer Dwgs.User) (width 0.05))
+
+                )
+
+            
             (gr_line (start -9.5 9.5) (end 9.5 9.5) (angle 90) (layer Edge.Cuts) (width 0.15))
 (gr_line (start 9.5 9.5) (end 9.5 -9.5) (angle 90) (layer Edge.Cuts) (width 0.15))
 (gr_line (start 9.5 -9.5) (end -9.5 -9.5) (angle 90) (layer Edge.Cuts) (width 0.15))

test/pcbs/outlines.yaml

@@ -0,0 +1,34 @@
+points.zones.matrix:
+  columns:
+    left:
+    right:
+  rows.only:
+outlines:
+  left:
+    out:
+      what: rectangle
+      where: matrix_left_only
+      size: u
+      fillet: u/5
+    in:
+      what: circle
+      where: matrix_left_only
+      radius: u/4
+      operation: subtract
+  right:
+    out:
+      what: rectangle
+      where: matrix_right_only
+      size: u
+      bevel: u/5
+    in:
+      what: rectangle
+      where: matrix_right_only
+      size: u/2
+      bevel: u/4
+      operation: subtract
+pcbs:
+  main:
+    outlines:
+      - outline: 'left'
+      - outline: 'right'

test/pcbs/outlines___pcbs_main.kicad_pcb

@@ -0,0 +1,132 @@
+
+            
+(kicad_pcb (version 20171130) (host pcbnew 5.1.6)
+
+  (page A3)
+  (title_block
+    (title main)
+    (rev v1.0.0)
+    (company Unknown)
+  )
+
+  (general
+    (thickness 1.6)
+  )
+
+  (layers
+    (0 F.Cu signal)
+    (31 B.Cu signal)
+    (32 B.Adhes user)
+    (33 F.Adhes user)
+    (34 B.Paste user)
+    (35 F.Paste user)
+    (36 B.SilkS user)
+    (37 F.SilkS user)
+    (38 B.Mask user)
+    (39 F.Mask user)
+    (40 Dwgs.User user)
+    (41 Cmts.User user)
+    (42 Eco1.User user)
+    (43 Eco2.User user)
+    (44 Edge.Cuts user)
+    (45 Margin user)
+    (46 B.CrtYd user)
+    (47 F.CrtYd user)
+    (48 B.Fab user)
+    (49 F.Fab user)
+  )
+
+  (setup
+    (last_trace_width 0.25)
+    (trace_clearance 0.2)
+    (zone_clearance 0.508)
+    (zone_45_only no)
+    (trace_min 0.2)
+    (via_size 0.8)
+    (via_drill 0.4)
+    (via_min_size 0.4)
+    (via_min_drill 0.3)
+    (uvia_size 0.3)
+    (uvia_drill 0.1)
+    (uvias_allowed no)
+    (uvia_min_size 0.2)
+    (uvia_min_drill 0.1)
+    (edge_width 0.05)
+    (segment_width 0.2)
+    (pcb_text_width 0.3)
+    (pcb_text_size 1.5 1.5)
+    (mod_edge_width 0.12)
+    (mod_text_size 1 1)
+    (mod_text_width 0.15)
+    (pad_size 1.524 1.524)
+    (pad_drill 0.762)
+    (pad_to_mask_clearance 0.05)
+    (aux_axis_origin 0 0)
+    (visible_elements FFFFFF7F)
+    (pcbplotparams
+      (layerselection 0x010fc_ffffffff)
+      (usegerberextensions false)
+      (usegerberattributes true)
+      (usegerberadvancedattributes true)
+      (creategerberjobfile true)
+      (excludeedgelayer true)
+      (linewidth 0.100000)
+      (plotframeref false)
+      (viasonmask false)
+      (mode 1)
+      (useauxorigin false)
+      (hpglpennumber 1)
+      (hpglpenspeed 20)
+      (hpglpendiameter 15.000000)
+      (psnegative false)
+      (psa4output false)
+      (plotreference true)
+      (plotvalue true)
+      (plotinvisibletext false)
+      (padsonsilk false)
+      (subtractmaskfromsilk false)
+      (outputformat 1)
+      (mirror false)
+      (drillshape 1)
+      (scaleselection 1)
+      (outputdirectory ""))
+  )
+
+            (net 0 "")
+            
+  (net_class Default "This is the default net class."
+    (clearance 0.2)
+    (trace_width 0.25)
+    (via_dia 0.8)
+    (via_drill 0.4)
+    (uvia_dia 0.3)
+    (uvia_drill 0.1)
+    (add_net "")
+  )
+
+            
+            (gr_line (start -5.7 9.5) (end 5.699999999999999 9.5) (angle 90) (layer Edge.Cuts) (width 0.15))
+(gr_line (start 9.5 5.7) (end 9.5 -5.699999999999999) (angle 90) (layer Edge.Cuts) (width 0.15))
+(gr_line (start 5.699999999999999 -9.5) (end -5.7 -9.5) (angle 90) (layer Edge.Cuts) (width 0.15))
+(gr_line (start -9.5 -5.699999999999999) (end -9.5 5.7) (angle 90) (layer Edge.Cuts) (width 0.15))
+(gr_arc (start 5.7 5.7) (end 5.7 9.5) (angle -90) (layer Edge.Cuts) (width 0.15))
+(gr_arc (start 5.7 -5.7) (end 9.5 -5.7) (angle -90) (layer Edge.Cuts) (width 0.15))
+(gr_arc (start -5.7 -5.7) (end -5.7 -9.5) (angle -90) (layer Edge.Cuts) (width 0.15))
+(gr_arc (start -5.7 5.7) (end -9.5 5.7) (angle -90) (layer Edge.Cuts) (width 0.15))
+(gr_circle (center 0 0) (end 4.75 0) (layer Edge.Cuts) (width 0.15))
+(gr_line (start 13.3 9.5) (end 9.5 5.7) (angle 90) (layer Edge.Cuts) (width 0.15))
+(gr_line (start 9.5 5.7) (end 9.5 -5.7) (angle 90) (layer Edge.Cuts) (width 0.15))
+(gr_line (start 9.5 -5.7) (end 13.3 -9.5) (angle 90) (layer Edge.Cuts) (width 0.15))
+(gr_line (start 13.3 -9.5) (end 24.700000000000003 -9.5) (angle 90) (layer Edge.Cuts) (width 0.15))
+(gr_line (start 24.700000000000003 -9.5) (end 28.5 -5.7) (angle 90) (layer Edge.Cuts) (width 0.15))
+(gr_line (start 28.5 -5.7) (end 28.5 5.7) (angle 90) (layer Edge.Cuts) (width 0.15))
+(gr_line (start 28.5 5.7) (end 24.700000000000003 9.5) (angle 90) (layer Edge.Cuts) (width 0.15))
+(gr_line (start 24.700000000000003 9.5) (end 13.3 9.5) (angle 90) (layer Edge.Cuts) (width 0.15))
+(gr_line (start 19 4.75) (end 14.25 0) (angle 90) (layer Edge.Cuts) (width 0.15))
+(gr_line (start 14.25 0) (end 19 -4.75) (angle 90) (layer Edge.Cuts) (width 0.15))
+(gr_line (start 19 -4.75) (end 23.75 0) (angle 90) (layer Edge.Cuts) (width 0.15))
+(gr_line (start 23.75 0) (end 19 4.75) (angle 90) (layer Edge.Cuts) (width 0.15))
+            
+)
+
+        

test/points/mirrors.yaml

@@ -0,0 +1,15 @@
+points:
+  mirror:
+    ref: matrix_right_top
+    distance: U
+  zones:
+    matrix:
+      columns:
+        left:
+          rows:
+            bottom.asym: source
+            top.asym: clone
+        right:
+      rows:
+        bottom:
+        top:

test/points/mirrors___demo_dxf.dxf

@@ -0,0 +1,338 @@
+0
+SECTION
+2
+HEADER
+9
+$INSUNITS
+70
+4
+0
+ENDSEC
+0
+SECTION
+2
+TABLES
+0
+TABLE
+2
+LTYPE
+0
+LTYPE
+72
+65
+70
+64
+2
+CONTINUOUS
+3
+______
+73
+0
+40
+0
+0
+ENDTAB
+0
+TABLE
+2
+LAYER
+0
+ENDTAB
+0
+ENDSEC
+0
+SECTION
+2
+ENTITIES
+0
+LINE
+8
+0
+10
+-9
+20
+9
+11
+9
+21
+9
+0
+LINE
+8
+0
+10
+9
+20
+9
+11
+9
+21
+-9
+0
+LINE
+8
+0
+10
+9
+20
+-9
+11
+-9
+21
+-9
+0
+LINE
+8
+0
+10
+-9
+20
+-9
+11
+-9
+21
+9
+0
+LINE
+8
+0
+10
+10
+20
+9
+11
+28
+21
+9
+0
+LINE
+8
+0
+10
+28
+20
+9
+11
+28
+21
+-9
+0
+LINE
+8
+0
+10
+28
+20
+-9
+11
+10
+21
+-9
+0
+LINE
+8
+0
+10
+10
+20
+-9
+11
+10
+21
+9
+0
+LINE
+8
+0
+10
+10
+20
+28
+11
+28
+21
+28
+0
+LINE
+8
+0
+10
+28
+20
+28
+11
+28
+21
+10
+0
+LINE
+8
+0
+10
+28
+20
+10
+11
+10
+21
+10
+0
+LINE
+8
+0
+10
+10
+20
+10
+11
+10
+21
+28
+0
+LINE
+8
+0
+10
+48.05
+20
+28
+11
+66.05
+21
+28
+0
+LINE
+8
+0
+10
+66.05
+20
+28
+11
+66.05
+21
+10
+0
+LINE
+8
+0
+10
+66.05
+20
+10
+11
+48.05
+21
+10
+0
+LINE
+8
+0
+10
+48.05
+20
+10
+11
+48.05
+21
+28
+0
+LINE
+8
+0
+10
+29.05
+20
+9
+11
+47.05
+21
+9
+0
+LINE
+8
+0
+10
+47.05
+20
+9
+11
+47.05
+21
+-9
+0
+LINE
+8
+0
+10
+47.05
+20
+-9
+11
+29.05
+21
+-9
+0
+LINE
+8
+0
+10
+29.05
+20
+-9
+11
+29.05
+21
+9
+0
+LINE
+8
+0
+10
+29.05
+20
+28
+11
+47.05
+21
+28
+0
+LINE
+8
+0
+10
+47.05
+20
+28
+11
+47.05
+21
+10
+0
+LINE
+8
+0
+10
+47.05
+20
+10
+11
+29.05
+21
+10
+0
+LINE
+8
+0
+10
+29.05
+20
+10
+11
+29.05
+21
+28
+0
+ENDSEC
+0
+EOF

test/points/rotations.yaml

@@ -0,0 +1,16 @@
+points:
+  rotate: 22.5
+  zones:
+    matrix:
+      rotate: 22.5
+      key:
+        origin: [-u/2, -u/2]
+      columns:
+        left:
+        right.key:
+          rotate: -45
+          padding: (1+sqrt(2))/2 * u
+          spread: (1+sqrt(2))/2 * u
+      rows:
+        bottom:
+        top:

test/points/rotations___demo_dxf.dxf

@@ -0,0 +1,242 @@
+0
+SECTION
+2
+HEADER
+9
+$INSUNITS
+70
+4
+0
+ENDSEC
+0
+SECTION
+2
+TABLES
+0
+TABLE
+2
+LTYPE
+0
+LTYPE
+72
+65
+70
+64
+2
+CONTINUOUS
+3
+______
+73
+0
+40
+0
+0
+ENDTAB
+0
+TABLE
+2
+LAYER
+0
+ENDTAB
+0
+ENDSEC
+0
+SECTION
+2
+ENTITIES
+0
+LINE
+8
+0
+10
+-12.7279221
+20
+0
+11
+0
+21
+12.7279221
+0
+LINE
+8
+0
+10
+0
+20
+12.7279221
+11
+12.7279221
+21
+0
+0
+LINE
+8
+0
+10
+12.7279221
+20
+0
+11
+0
+21
+-12.7279221
+0
+LINE
+8
+0
+10
+0
+20
+-12.7279221
+11
+-12.7279221
+21
+0
+0
+LINE
+8
+0
+10
+-26.1629509
+20
+13.4350288
+11
+-13.4350288
+21
+26.1629509
+0
+LINE
+8
+0
+10
+-13.4350288
+20
+26.1629509
+11
+-0.7071067
+21
+13.4350288
+0
+LINE
+8
+0
+10
+-0.7071067
+20
+13.4350288
+11
+-13.4350288
+21
+0.7071067
+0
+LINE
+8
+0
+10
+-13.4350288
+20
+0.7071067
+11
+-26.1629509
+21
+13.4350288
+0
+LINE
+8
+0
+10
+7.2175144
+20
+25.2175144
+11
+25.2175144
+21
+25.2175144
+0
+LINE
+8
+0
+10
+25.2175144
+20
+25.2175144
+11
+25.2175144
+21
+7.2175144
+0
+LINE
+8
+0
+10
+25.2175144
+20
+7.2175144
+11
+7.2175144
+21
+7.2175144
+0
+LINE
+8
+0
+10
+7.2175144
+20
+7.2175144
+11
+7.2175144
+21
+25.2175144
+0
+LINE
+8
+0
+10
+16.2175144
+20
+51.8804653
+11
+28.9454365
+21
+39.1525432
+0
+LINE
+8
+0
+10
+28.9454365
+20
+39.1525432
+11
+16.2175144
+21
+26.4246211
+0
+LINE
+8
+0
+10
+16.2175144
+20
+26.4246211
+11
+3.4895923
+21
+39.1525432
+0
+LINE
+8
+0
+10
+3.4895923
+20
+39.1525432
+11
+16.2175144
+21
+51.8804653
+0
+ENDSEC
+0
+EOF

test/unit/anchor.js

@@ -56,6 +56,21 @@ describe('Anchor', function() {
             }, 'name', points)(),
             [5, 5, -45, {}]
         )
+        // empty parts
+        check(
+            parse({
+                aggregate: {
+                }
+            }, 'name', points)(),
+            [0, 0, 0, {}]
+        )
+        // can't have aggregate and ref together
+        parse({
+          aggregate: {
+            parts: ['o', 'ten']
+          },
+          ref : 'ten'
+        }, 'name', points).should.throw()
     })
 
     it('shift', function() {

test/unit/filter.js

@@ -4,6 +4,12 @@ const Point = require('../../src/point')
 
 describe('Filter', function() {
 
+    it('empty', function() {
+      filter(undefined, '').should.deep.equal([new Point()])
+      filter(true, '').should.deep.equal([])
+      filter(false, '').should.deep.equal([])
+    })
+
     const points = {
         one: new Point(0, 1, 0, {name: 'one', tags: ['odd']}),
         two: new Point(0, 2, 0, {name: 'two', tags: ['even', 'prime']}),
@@ -18,8 +24,15 @@ describe('Filter', function() {
         // true shouldn't filter anything, while false should filter everything
         filter(true, '', points).should.deep.equal(Object.values(points))
         filter(false, '', points).should.deep.equal([])
+        // points should only be returned on their respective halves
+        filter(true, '', points, undefined, 'source').should.deep.equal(Object.values(points))
+        filter(true, '', points, undefined, 'clone').should.deep.equal([])
+        filter(true, '', points, undefined, 'both').should.deep.equal(Object.values(points))
         // objects just propagate to anchor (and then wrap in array for consistency)
         filter({}, '', points).should.deep.equal([anchor({}, '', points)()])
+        filter({}, '', points, undefined, 'source').should.deep.equal([anchor({}, '', points)()])
+        filter({}, '', points, undefined, 'clone').should.deep.equal([anchor({}, '', points)()])
+        filter({}, '', points, undefined, 'both').should.deep.equal([anchor({}, '', points)(), anchor({}, '', points)()])
         // simple name string
         names(filter('one', '', points)).should.deep.equal(['one'])
         // simple name regex

test/unit/interface.js

@@ -10,7 +10,8 @@ const load = name => yaml.safeLoad(fs.readFileSync(
 ).toString())
 const minimal = load('minimal.yaml')
 const big = load('big.yaml')
-const kle = load('atreus_kle.json')
+const minimal_kle = load('minimal_kle.json')
+const atreus_kle = load('atreus_kle.json')
 
 describe('Interface', function() {
 
@@ -49,7 +50,8 @@ describe('Interface', function() {
                 //:
                 return 'not an object';
             `, true, logger).should.be.rejectedWith('not valid'),
-            ergogen.process(kle, true, logger).should.be.rejectedWith('KLE'),
+            ergogen.process(minimal_kle, true, logger).should.be.rejectedWith('KLE'),
+            ergogen.process(atreus_kle, true, logger).should.be.rejectedWith('KLE'),
             ergogen.process('not an object', true, logger).should.be.rejectedWith('object'),
             ergogen.process({}, true, logger).should.be.rejectedWith('empty'),
             ergogen.process({not_points: {}}, true, () => {}).should.be.rejectedWith('points clause'),

test/unit/units.js

@@ -5,12 +5,19 @@ describe('Units', function() {
 
     it('defaults', function() {
         // check that an empty config has the default units (and nothing more)
-        const def = u.parse({})
-        Object.keys(def).filter(public).length.should.equal(4)
-        def.U.should.equal(19.05)
-        def.u.should.equal(19)
-        def.cx.should.equal(18)
-        def.cy.should.equal(17)
+        const def1 = u.parse({})
+        Object.keys(def1).filter(public).length.should.equal(4)
+        def1.U.should.equal(19.05)
+        def1.u.should.equal(19)
+        def1.cx.should.equal(18)
+        def1.cy.should.equal(17)
+        // check that an empty config has the default units (and nothing more)
+        const def2 = u.parse()
+        Object.keys(def2).filter(public).length.should.equal(4)
+        def2.U.should.equal(19.05)
+        def2.u.should.equal(19)
+        def2.cx.should.equal(18)
+        def2.cy.should.equal(17)
     })
 
     it('units', function() {