qmk_firmware/keyboards/crkbd/keymaps/crkdves/config.h

/*
This is the c configuration file for the keymap

Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

/* Select hand configuration */

#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS

#define QUICK_TAP_TERM 0
#define TAPPING_TERM 200
// #define RETRO_TAPPING

#ifdef RGBLIGHT_ENABLE
    #define RGBLIGHT_SLEEP
    #define RGBLIGHT_SPLIT
    #define RGBLIGHT_LIMIT_VAL 120
    #define RGBLIGHT_HUE_STEP 10
    #define RGBLIGHT_SAT_STEP 17
    #define RGBLIGHT_VAL_STEP 17
#endif


#ifdef OLED_ENABLE
#   define SPLIT_LAYER_STATE_ENABLE
#   define SPLIT_LED_STATE_ENABLE
#   define SPLIT_MODS_ENABLE
#   define SPLIT_OLED_ENABLE
#   define OLED_FONT_H "keyboards/crkbd/keymaps/crkdves/glcdfont.c"
#   define OLED_TIMEOUT 30000
#endif

#ifdef RGB_MATRIX_ENABLE
#   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
// #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
#   define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#   define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
#   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
#   define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
#   define RGB_MATRIX_HUE_STEP 8
#   define RGB_MATRIX_SAT_STEP 8
#   define RGB_MATRIX_VAL_STEP 8
#   define RGB_MATRIX_SPD_STEP 10

/* Disable the animations you don't want/need.  You will need to disable a good number of these    *
 * because they take up a lot of space.  Disable until you can successfully compile your firmware. */
#   define ENABLE_RGB_MATRIX_ALPHAS_MODS
#    undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
#   define ENABLE_RGB_MATRIX_BREATHING
#    undef ENABLE_RGB_MATRIX_BAND_SAT
#    undef ENABLE_RGB_MATRIX_BAND_VAL
#   define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
#    undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
#    undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
#    undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
#    undef ENABLE_RGB_MATRIX_CYCLE_ALL
#   define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
#   define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
#    undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN
#    undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
#   define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
#    undef ENABLE_RGB_MATRIX_DUAL_BEACON
#    undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
#   define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
#   define ENABLE_RGB_MATRIX_RAINBOW_BEACON
#   define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
#    undef ENABLE_RGB_MATRIX_RAINDROPS
#    undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
#   define ENABLE_RGB_MATRIX_TYPING_HEATMAP
#   define ENABLE_RGB_MATRIX_DIGITAL_RAIN
#    undef ENABLE_RGB_MATRIX_SOLID_REACTIVE
#    undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
#    undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
#   define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
#    undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
#    undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
#   define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
#   define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
#    undef ENABLE_RGB_MATRIX_SPLASH
#   define ENABLE_RGB_MATRIX_MULTISPLASH
#    undef ENABLE_RGB_MATRIX_SOLID_SPLASH
#    undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
#endif
[Keymap] qwerty and dvorak keyboard setup (#16592) Co-authored-by: Drashna Jaelre <drashna@live.com> 2022-08-07 14:07:25 -07:00			`/*`
			`This is the c configuration file for the keymap`

			`Copyright 2012 Jun Wako <wakojun@gmail.com>`
			`Copyright 2015 Jack Humbert`

			`This program is free software: you can redistribute it and/or modify`
			`it under the terms of the GNU General Public License as published by`
			`the Free Software Foundation, either version 2 of the License, or`
			`(at your option) any later version.`

			`This program is distributed in the hope that it will be useful,`
			`but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`GNU General Public License for more details.`

			`You should have received a copy of the GNU General Public License`
			`along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*/`

			`#pragma once`

			`/* Select hand configuration */`

			`#define MASTER_LEFT`
			`// #define MASTER_RIGHT`
			`// #define EE_HANDS`

[Core] Replace Tapping Force Hold feature with Quick Tap Term (#17007) * Replace Tapping Force Hold feature with Quick Tap Term * Replace keyboard level TAPPING_FORCE_HOLD with QUICK_TAP_TERM 0 * Deprecate force hold in info_config.json * Before and after quick tap term unit tests * Quick tap unit tests iteration * Keymap config.h correction * Remove TAPPING_FORCE_HOLD_PER_KEY macros that were missed * Add two more test cases for quick tap * Replace TAPPING_FORCE_HOLD with QUICK_TAP_TERM in configs #2 * Replace TAPPING_FORCE_HOLD_PER_KEY with QUICK_TAP_TERM_PER_KEY in configs #2 * Add function declaration for get_quick_tap_term Co-authored-by: Stefan Kerkmann <karlk90@pm.me> 2022-12-12 07:52:22 -08:00			`#define QUICK_TAP_TERM 0`
[Keymap] qwerty and dvorak keyboard setup (#16592) Co-authored-by: Drashna Jaelre <drashna@live.com> 2022-08-07 14:07:25 -07:00			`#define TAPPING_TERM 200`
			`// #define RETRO_TAPPING`

			`#ifdef RGBLIGHT_ENABLE`
			`#define RGBLIGHT_SLEEP`
			`#define RGBLIGHT_SPLIT`
			`#define RGBLIGHT_LIMIT_VAL 120`
			`#define RGBLIGHT_HUE_STEP 10`
			`#define RGBLIGHT_SAT_STEP 17`
			`#define RGBLIGHT_VAL_STEP 17`
			`#endif`


			`#ifdef OLED_ENABLE`
			`# define SPLIT_LAYER_STATE_ENABLE`
			`# define SPLIT_LED_STATE_ENABLE`
			`# define SPLIT_MODS_ENABLE`
			`# define SPLIT_OLED_ENABLE`
			`# define OLED_FONT_H "keyboards/crkbd/keymaps/crkdves/glcdfont.c"`
			`# define OLED_TIMEOUT 30000`
			`#endif`

			`#ifdef RGB_MATRIX_ENABLE`
			`# define RGB_MATRIX_KEYPRESSES // reacts to keypresses`
			`// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)`
			`# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended`
			`# define RGB_MATRIX_FRAMEBUFFER_EFFECTS`
Change `DRIVER_LED_COUNT` to `{LED,RGB}_MATRIX_LED_COUNT` (#18399) 2022-09-23 05:46:23 -07:00			`# define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)`
[Keymap] qwerty and dvorak keyboard setup (#16592) Co-authored-by: Drashna Jaelre <drashna@live.com> 2022-08-07 14:07:25 -07:00			`# define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)`
			`# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.`
			`# define RGB_MATRIX_HUE_STEP 8`
			`# define RGB_MATRIX_SAT_STEP 8`
			`# define RGB_MATRIX_VAL_STEP 8`
			`# define RGB_MATRIX_SPD_STEP 10`

			`/* Disable the animations you don't want/need. You will need to disable a good number of these *`
			`* because they take up a lot of space. Disable until you can successfully compile your firmware. */`
			`# define ENABLE_RGB_MATRIX_ALPHAS_MODS`
			`# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN`
			`# define ENABLE_RGB_MATRIX_BREATHING`
			`# undef ENABLE_RGB_MATRIX_BAND_SAT`
			`# undef ENABLE_RGB_MATRIX_BAND_VAL`
			`# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT`
			`# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL`
			`# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT`
			`# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL`
			`# undef ENABLE_RGB_MATRIX_CYCLE_ALL`
			`# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT`
			`# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN`
			`# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN`
			`# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL`
			`# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`
			`# undef ENABLE_RGB_MATRIX_DUAL_BEACON`
			`# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL`
			`# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL`
			`# define ENABLE_RGB_MATRIX_RAINBOW_BEACON`
			`# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS`
			`# undef ENABLE_RGB_MATRIX_RAINDROPS`
			`# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS`
			`# define ENABLE_RGB_MATRIX_TYPING_HEATMAP`
			`# define ENABLE_RGB_MATRIX_DIGITAL_RAIN`
			`# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE`
			`# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE`
			`# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE`
			`# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE`
			`# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS`
			`# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS`
			`# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS`
			`# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS`
			`# undef ENABLE_RGB_MATRIX_SPLASH`
			`# define ENABLE_RGB_MATRIX_MULTISPLASH`
			`# undef ENABLE_RGB_MATRIX_SOLID_SPLASH`
			`# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH`
			`#endif`