qmk_firmware/keyboards/dyz/dyz60_hs/readme.md

# dyz60_hs

![dyz60 pcb](https://i.imgur.com/l9z5KuJh.jpg)

60% layout has flexcut with multiple layout and mounting support.

* Keyboard Maintainer: [dayatz](https://github.com/dayatz)
* Hardware Supported: dyz60_hs, ATmega32U4
* Hardware Availability: Local Indonesia GB.

#### Enter Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the Esc key and plug in the keyboard
* **Physical reset pins**: Briefly short the reset pins on the bottom of Space key


#### Flashing

Make example for this keyboard (after setting up your build environment):

    make dyz/dyz60_hs:default

Flashing example for this keyboard:

    make dyz/dyz60_hs:default:flash

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
dyz60_hs Layout Additions (#18261) * dyz60_hs: add matrix diagram * add LAYOUT_60_ansi * add LAYOUT_60_ansi_split_bs_rshift * add LAYOUT_60_tsangan_hhkb * add LAYOUT_60_iso * add LAYOUT_60_iso_split_bs_rshift * enable Community Layouts support * readme.md: correct keyboard references Replace `dyz60` with `dyz60_hs` as needed. 2022-09-03 14:43:52 -07:00			`# dyz60_hs`
[Keyboard] add dyz60-hs (#17763) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> 2022-07-29 21:07:10 -07:00
			`![dyz60 pcb](https://i.imgur.com/l9z5KuJh.jpg)`

			`60% layout has flexcut with multiple layout and mounting support.`

			`* Keyboard Maintainer: [dayatz](https://github.com/dayatz)`
dyz60_hs Layout Additions (#18261) * dyz60_hs: add matrix diagram * add LAYOUT_60_ansi * add LAYOUT_60_ansi_split_bs_rshift * add LAYOUT_60_tsangan_hhkb * add LAYOUT_60_iso * add LAYOUT_60_iso_split_bs_rshift * enable Community Layouts support * readme.md: correct keyboard references Replace `dyz60` with `dyz60_hs` as needed. 2022-09-03 14:43:52 -07:00			`* Hardware Supported: dyz60_hs, ATmega32U4`
[Keyboard] add dyz60-hs (#17763) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> 2022-07-29 21:07:10 -07:00			`* Hardware Availability: Local Indonesia GB.`

			`#### Enter Bootloader`

			`Enter the bootloader in 3 ways:`

			`* Bootmagic reset: Hold down the Esc key and plug in the keyboard`
			`* Physical reset pins: Briefly short the reset pins on the bottom of Space key`


			`#### Flashing`

			`Make example for this keyboard (after setting up your build environment):`

dyz60_hs Layout Additions (#18261) * dyz60_hs: add matrix diagram * add LAYOUT_60_ansi * add LAYOUT_60_ansi_split_bs_rshift * add LAYOUT_60_tsangan_hhkb * add LAYOUT_60_iso * add LAYOUT_60_iso_split_bs_rshift * enable Community Layouts support * readme.md: correct keyboard references Replace `dyz60` with `dyz60_hs` as needed. 2022-09-03 14:43:52 -07:00			`make dyz/dyz60_hs:default`
[Keyboard] add dyz60-hs (#17763) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> 2022-07-29 21:07:10 -07:00
			`Flashing example for this keyboard:`

dyz60_hs Layout Additions (#18261) * dyz60_hs: add matrix diagram * add LAYOUT_60_ansi * add LAYOUT_60_ansi_split_bs_rshift * add LAYOUT_60_tsangan_hhkb * add LAYOUT_60_iso * add LAYOUT_60_iso_split_bs_rshift * enable Community Layouts support * readme.md: correct keyboard references Replace `dyz60` with `dyz60_hs` as needed. 2022-09-03 14:43:52 -07:00			`make dyz/dyz60_hs:default:flash`
[Keyboard] add dyz60-hs (#17763) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Joel Challis <git@zvecr.com> 2022-07-29 21:07:10 -07:00
			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`