qmk_firmware/keyboards/gray_studio/space65/keymaps/keithlo/readme.md

108 lines
5.7 KiB
Markdown
Raw Permalink Normal View History

## Space65 layout (with split space row -- no pun intended)
This layout is optimized for vim users on MacOS.
The split space row == least travel possible (I've found). Coming from an Alice this is the only way I can find myself going back to a non-ergonomic 6X% board
###### Settings:
* The `ALT` and `CMD` keys are swapped to replicate the Mac layout
* vim-style arrow key bindings H J K L in Fn layer
###### Flashing:
* v1 PCB: in order to toggle BootLoader from a factory PCB you must hold down ESC + Modifier MO(1) before you plug the board in
* otherwise you just hold ESC before you plug the board in
* Next, to make the .hex file and subsequently flash the board run:
```$ make gray_studio/space65:keithlo:flash # be in the qmk_firmware directory to do this ```
* more info at the bottom if you're getting errors
### Qwerty
```
,------------------------------------------------------------------------------------------------.
| ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BSPC | DEL |
|------------------------------------------------------------------------------------------------+
| TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | INS |
|------------------------------------------------------------------------------------------------+
| CAPS | A | S | D | F | G | H | J | K | L | ; | ' | Enter | PGUP |
|------------------------------------------------------------------------------------------------+
| Shift | Z | X | C | V | B | N | M | , | . | ?/ | Shift | Up | PGDN |
|------------------------------------------------------------------------------------------------+
| Ctrl | Alt | Cmd | Space | Fn | Cmd | Alt | Fn | | Left | Down |Right |
`----------------------------------------------------------------------' '--------------------'
```
### Fn Layer
```
,------------------------------------------------------------------------------------------------.
| | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | Vol- | Vol+ | Mute | Mute |
|------------------------------------------------------------------------------------------------+
| |RGB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+| | | | | | |
|------------------------------------------------------------------------------------------------+
| | RGBP | RGPG | RGPK | | | Left| Down| Up |Right| | | Play/Pause | |
|------------------------------------------------------------------------------------------------+
| | | | | | | | | | Scr- | Scr+ | | PgUp | |
|------------------------------------------------------------------------------------------------+
| | | | | | | | | | Home | PgDn | End |
`---------------------------------------------------------------------' '--------------------'
Fn Layer Mapping chars -> RGB commands
|------------------------------------------------------------------------------------------------+
| |RGB T|RGB M| Hue-| Hue+| Sat-| Sat+| Val-| Val+| | | | | | |
|------------------------------------------------------------------------------------------------+
| | Q | W | E | R | T | Y | U | I | | | | | | |
|------------------------------------------------------------------------------------------------+
|------------------------------------------------------------------------------------------------+
| | RGBP | RGPG | RGPK | | | Left| Down| Up |Right| | | Play/Pause | |
|------------------------------------------------------------------------------------------------+
| | A | S | D | | | H | J | K | L | | | Enter | |
|------------------------------------------------------------------------------------------------+
```
###### Flashing (debugging)
* Make sure you are holding ESC + MO(1) when you plug board in
* Release ESC + MO(1) if you are stuck in the ```dfu-programmer: no device present.
ERROR: Bootloader not found. Trying again in 5s.``` loop seen below
* You should see a screen like this when you make and flash
```
qmk_firmware git:(master)$ make gray_studio/space65:keithlo:flash
QMK Firmware 0.8.107
Making gray_studio/space65 with keymap keithlo and target flash
avr-gcc (GCC) 8.3.0
Copyright (C) 2018 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Size before:
text data bss dec hex filename
0 21836 0 21836 554c .build/gray_studio_space65_keithlo.hex
Copying gray_studio_space65_keithlo.hex to qmk_firmware folder [OK]
Checking file size of gray_studio_space65_keithlo.hex [OK]
* The firmware size is fine - 21836/28672 (76%, 6836 bytes free)
dfu-programmer: no device present.
ERROR: Bootloader not found. Trying again in 5s.
dfu-programmer: no device present.
ERROR: Bootloader not found. Trying again in 5s.
Bootloader Version: 0x00 (0)
Erasing flash... Success
Checking memory from 0x0 to 0x6FFF... Empty.
Checking memory from 0x0 to 0x557F... Empty.
0% 100% Programming 0x5580 bytes...
[>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success
0% 100% Reading 0x7000 bytes...
[>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success
Validating... Success
0x5580 bytes written into 0x7000 bytes memory (76.34%).
qmk_firmware git:(master)$
```
shoutout @billiams for the base ascii art template