qmk_firmware/keyboards/omnikeyish/config.h

#pragma once


#define KEYBOARD_PCB_REV 11

/* key matrix pins */
#if KEYBOARD_PCB_REV == 10
#define MATRIX_ROW_PINS { D2, D3, D4, D5, D6, D7 }
#else
#define MATRIX_ROW_PINS { D2, D3, D4, D5, E6, D7 }
#endif
#define MATRIX_COL_PINS { F0, F1, F2, F3, F4, F5, F6, F7, C7, C6, C5, C4, C3, C2, C1, C0, B0, B1, B2, B3, B4, B5, B6 }

/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE

/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

#define DYNAMIC_MACRO_COUNT 12
#define DYNAMIC_MACRO_SIZE 48
#define DYNAMIC_MACRO_EEPROM_STORAGE
#define DYNAMIC_MACRO_EEPROM_MAGIC_ADDR (uint16_t*)32
#define DYNAMIC_MACRO_EEPROM_BLOCK0_ADDR (uint8_t*)34
[Keyboard] Add new keyboard: Omnikeyish - A replacement PCB for the Northgate Omnikey family (#6167) * Add omnikeyish keyboard support. * remove out of date comment * PCB Rev 1.1 moved Row5's pin to E6, because the teensy++ hangs an onboard LED off D6. * Move string.h include to .c file * Add pcb kicad link. * Add info.json * Move macro programming to numlock's keyposition, the most useless key on the post model M layout. Force numlock enabled on host at init time, so you're not stuck without a numpad (hopefully) * Make the macro blink function toggle LEDs from their previous state. * Use incorrect but code style compliant opening curly bracing style. * Make PCB rev 1.1 the default Omnikeyish config, as the author has the only rev 1.0 boards that'll ever be. * Fix silly spelling error in 3 defines * First set of review changes. * Layout macro and keymap defined using it. * Layout macros for the northgate factory plates. * minor rearrangements * ALL the layouts. * Forgot ultra-t in info.json 2019-06-22 08:36:05 -07:00			`#pragma once`


			`#define KEYBOARD_PCB_REV 11`

			`/* key matrix pins */`
			`#if KEYBOARD_PCB_REV == 10`
			`#define MATRIX_ROW_PINS { D2, D3, D4, D5, D6, D7 }`
			`#else`
			`#define MATRIX_ROW_PINS { D2, D3, D4, D5, E6, D7 }`
Remove RGBLIGHT_ANIMATION and clean up effect defines for L-Q (#18727) 2022-10-15 09:55:40 -07:00			`#endif`
[Keyboard] Add new keyboard: Omnikeyish - A replacement PCB for the Northgate Omnikey family (#6167) * Add omnikeyish keyboard support. * remove out of date comment * PCB Rev 1.1 moved Row5's pin to E6, because the teensy++ hangs an onboard LED off D6. * Move string.h include to .c file * Add pcb kicad link. * Add info.json * Move macro programming to numlock's keyposition, the most useless key on the post model M layout. Force numlock enabled on host at init time, so you're not stuck without a numpad (hopefully) * Make the macro blink function toggle LEDs from their previous state. * Use incorrect but code style compliant opening curly bracing style. * Make PCB rev 1.1 the default Omnikeyish config, as the author has the only rev 1.0 boards that'll ever be. * Fix silly spelling error in 3 defines * First set of review changes. * Layout macro and keymap defined using it. * Layout macros for the northgate factory plates. * minor rearrangements * ALL the layouts. * Forgot ultra-t in info.json 2019-06-22 08:36:05 -07:00			`#define MATRIX_COL_PINS { F0, F1, F2, F3, F4, F5, F6, F7, C7, C6, C5, C4, C3, C2, C1, C0, B0, B1, B2, B3, B4, B5, B6 }`

			`/* COL2ROW or ROW2COL */`
			`#define DIODE_DIRECTION ROW2COL`

			`/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */`
			`#define LOCKING_SUPPORT_ENABLE`

			`/* Locking resynchronize hack */`
			`#define LOCKING_RESYNC_ENABLE`

			`#define DYNAMIC_MACRO_COUNT 12`
			`#define DYNAMIC_MACRO_SIZE 48`
			`#define DYNAMIC_MACRO_EEPROM_STORAGE`
			`#define DYNAMIC_MACRO_EEPROM_MAGIC_ADDR (uint16_t*)32`
			`#define DYNAMIC_MACRO_EEPROM_BLOCK0_ADDR (uint8_t*)34`