qmk_firmware/quantum/logging/print.h

152 lines
6.6 KiB
C
Raw Permalink Normal View History

/* Copyright 2012 Jun Wako <wakojun@gmail.com> */
/* Very basic print functions, intended to be used with usb_debug_only.c
* http://www.pjrc.com/teensy/
* Copyright (c) 2008 PJRC.COM, LLC
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "util.h"
#include "sendchar.h"
#include "progmem.h"
void print_set_sendchar(sendchar_func_t func);
/**
* @brief This macro suppress format warnings for the function that is passed
* in. The main use-case is that `b` format specifier for printing binary
* numbers is not in the official C standard. Inclusion is planned for the
* upcoming C2X C standard, but until then GCC will always output a warning for
* a unknown format specifier.
*/
#define IGNORE_FORMAT_WARNING(func) \
do { \
_Pragma("GCC diagnostic push"); \
_Pragma("GCC diagnostic ignored \"-Wformat\""); \
_Pragma("GCC diagnostic ignored \"-Wformat-extra-args\""); \
func; \
_Pragma("GCC diagnostic pop"); \
} while (0)
#ifndef NO_PRINT
# if __has_include_next("_print.h")
# include_next "_print.h" /* Include the platforms print.h */
# else
// Fall back to lib/printf
# include "printf.h" // lib/printf/printf.h
// Create user & normal print defines
# define print(s) printf(s)
# define println(s) printf(s "\r\n")
# define xprintf printf
# define uprint(s) printf(s)
# define uprintln(s) printf(s "\r\n")
# define uprintf printf
Massdrop keyboard support (#3780) * Massdrop SAMD51 Massdrop SAMD51 keyboards initial project upload * Removing relocated files Removing files that were relocated and not deleted from previous location * LED queue fix and cleaning Cleaned some white space or comments. Fix for LED I2C command queue. Cleaned up interrupts. Added debug function for printing numbers to scope through m15 line. * Factory programmed serial usage Ability to use factory programmed serial in hub and keyboard usb descriptors * USB serial number and bugfix Added support for factory programmed serial and usage. Incorporated bootloader's conditional compiling to align project closer. Fixed issue when USB device attempted to send before enabled. General white space and comment cleanup. * Project cleanup Cleaned up project in terms of white space, commented code, and unecessary files. NKRO keyboard is now using correct setreport although KBD was fine to use. Fixed broken linkage to __xprintf for serial debug statements. * Fix for extra keys Fixed possible USB hang on extra keys report set missing * I2C cleanup I2C cleanup and file renames necessary for master branch merge * Boot tracing and clocks cleanup Added optional boot debug trace mode through debug LED codes. General clock code cleanup. * Relocate ARM/Atmel headers Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes. * Pull request changes Pull request changes * Keymap and compile flag fix Keymap fix for momentary layer. Potential compile flag fix for Travis CI failure. * va_list include fix Fix for va_list compile failure * Include file case fixes Fixes for include files with incorrect case * ctrl and alt67 keyboard readme Added ctrl and alt67 keyboard readme files
2018-08-29 12:07:52 -07:00
# endif /* __has_include_next("_print.h") */
#else /* NO_PRINT */
# undef xprintf
// Remove print defines
# define print(s)
# define println(s)
# define xprintf(fmt, ...)
# define uprintf(fmt, ...)
# define uprint(s)
# define uprintln(s)
Massdrop keyboard support (#3780) * Massdrop SAMD51 Massdrop SAMD51 keyboards initial project upload * Removing relocated files Removing files that were relocated and not deleted from previous location * LED queue fix and cleaning Cleaned some white space or comments. Fix for LED I2C command queue. Cleaned up interrupts. Added debug function for printing numbers to scope through m15 line. * Factory programmed serial usage Ability to use factory programmed serial in hub and keyboard usb descriptors * USB serial number and bugfix Added support for factory programmed serial and usage. Incorporated bootloader's conditional compiling to align project closer. Fixed issue when USB device attempted to send before enabled. General white space and comment cleanup. * Project cleanup Cleaned up project in terms of white space, commented code, and unecessary files. NKRO keyboard is now using correct setreport although KBD was fine to use. Fixed broken linkage to __xprintf for serial debug statements. * Fix for extra keys Fixed possible USB hang on extra keys report set missing * I2C cleanup I2C cleanup and file renames necessary for master branch merge * Boot tracing and clocks cleanup Added optional boot debug trace mode through debug LED codes. General clock code cleanup. * Relocate ARM/Atmel headers Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes. * Pull request changes Pull request changes * Keymap and compile flag fix Keymap fix for momentary layer. Potential compile flag fix for Travis CI failure. * va_list include fix Fix for va_list compile failure * Include file case fixes Fixes for include files with incorrect case * ctrl and alt67 keyboard readme Added ctrl and alt67 keyboard readme files
2018-08-29 12:07:52 -07:00
#endif /* NO_PRINT */
Massdrop keyboard support (#3780) * Massdrop SAMD51 Massdrop SAMD51 keyboards initial project upload * Removing relocated files Removing files that were relocated and not deleted from previous location * LED queue fix and cleaning Cleaned some white space or comments. Fix for LED I2C command queue. Cleaned up interrupts. Added debug function for printing numbers to scope through m15 line. * Factory programmed serial usage Ability to use factory programmed serial in hub and keyboard usb descriptors * USB serial number and bugfix Added support for factory programmed serial and usage. Incorporated bootloader's conditional compiling to align project closer. Fixed issue when USB device attempted to send before enabled. General white space and comment cleanup. * Project cleanup Cleaned up project in terms of white space, commented code, and unecessary files. NKRO keyboard is now using correct setreport although KBD was fine to use. Fixed broken linkage to __xprintf for serial debug statements. * Fix for extra keys Fixed possible USB hang on extra keys report set missing * I2C cleanup I2C cleanup and file renames necessary for master branch merge * Boot tracing and clocks cleanup Added optional boot debug trace mode through debug LED codes. General clock code cleanup. * Relocate ARM/Atmel headers Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes. * Pull request changes Pull request changes * Keymap and compile flag fix Keymap fix for momentary layer. Potential compile flag fix for Travis CI failure. * va_list include fix Fix for va_list compile failure * Include file case fixes Fixes for include files with incorrect case * ctrl and alt67 keyboard readme Added ctrl and alt67 keyboard readme files
2018-08-29 12:07:52 -07:00
#ifdef USER_PRINT
Massdrop keyboard support (#3780) * Massdrop SAMD51 Massdrop SAMD51 keyboards initial project upload * Removing relocated files Removing files that were relocated and not deleted from previous location * LED queue fix and cleaning Cleaned some white space or comments. Fix for LED I2C command queue. Cleaned up interrupts. Added debug function for printing numbers to scope through m15 line. * Factory programmed serial usage Ability to use factory programmed serial in hub and keyboard usb descriptors * USB serial number and bugfix Added support for factory programmed serial and usage. Incorporated bootloader's conditional compiling to align project closer. Fixed issue when USB device attempted to send before enabled. General white space and comment cleanup. * Project cleanup Cleaned up project in terms of white space, commented code, and unecessary files. NKRO keyboard is now using correct setreport although KBD was fine to use. Fixed broken linkage to __xprintf for serial debug statements. * Fix for extra keys Fixed possible USB hang on extra keys report set missing * I2C cleanup I2C cleanup and file renames necessary for master branch merge * Boot tracing and clocks cleanup Added optional boot debug trace mode through debug LED codes. General clock code cleanup. * Relocate ARM/Atmel headers Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes. * Pull request changes Pull request changes * Keymap and compile flag fix Keymap fix for momentary layer. Potential compile flag fix for Travis CI failure. * va_list include fix Fix for va_list compile failure * Include file case fixes Fixes for include files with incorrect case * ctrl and alt67 keyboard readme Added ctrl and alt67 keyboard readme files
2018-08-29 12:07:52 -07:00
// Remove normal print defines
# undef print
# undef println
# undef xprintf
# define print(s)
# define println(s)
# define xprintf(fmt, ...)
#endif
Massdrop keyboard support (#3780) * Massdrop SAMD51 Massdrop SAMD51 keyboards initial project upload * Removing relocated files Removing files that were relocated and not deleted from previous location * LED queue fix and cleaning Cleaned some white space or comments. Fix for LED I2C command queue. Cleaned up interrupts. Added debug function for printing numbers to scope through m15 line. * Factory programmed serial usage Ability to use factory programmed serial in hub and keyboard usb descriptors * USB serial number and bugfix Added support for factory programmed serial and usage. Incorporated bootloader's conditional compiling to align project closer. Fixed issue when USB device attempted to send before enabled. General white space and comment cleanup. * Project cleanup Cleaned up project in terms of white space, commented code, and unecessary files. NKRO keyboard is now using correct setreport although KBD was fine to use. Fixed broken linkage to __xprintf for serial debug statements. * Fix for extra keys Fixed possible USB hang on extra keys report set missing * I2C cleanup I2C cleanup and file renames necessary for master branch merge * Boot tracing and clocks cleanup Added optional boot debug trace mode through debug LED codes. General clock code cleanup. * Relocate ARM/Atmel headers Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes. * Pull request changes Pull request changes * Keymap and compile flag fix Keymap fix for momentary layer. Potential compile flag fix for Travis CI failure. * va_list include fix Fix for va_list compile failure * Include file case fixes Fixes for include files with incorrect case * ctrl and alt67 keyboard readme Added ctrl and alt67 keyboard readme files
2018-08-29 12:07:52 -07:00
#define print_dec(i) xprintf("%u", i)
#define print_decs(i) xprintf("%d", i)
/* hex */
#define print_hex4(i) xprintf("%X", i)
#define print_hex8(i) xprintf("%02X", i)
#define print_hex16(i) xprintf("%04X", i)
#define print_hex32(i) xprintf("%08lX", i)
/* binary */
#define print_bin4(i) IGNORE_FORMAT_WARNING(xprintf("%04b", i))
#define print_bin8(i) IGNORE_FORMAT_WARNING(xprintf("%08b", i))
#define print_bin16(i) IGNORE_FORMAT_WARNING(xprintf("%016b", i))
#define print_bin32(i) IGNORE_FORMAT_WARNING(xprintf("%032lb", i))
#define print_bin_reverse8(i) IGNORE_FORMAT_WARNING(xprintf("%08b", bitrev(i)))
#define print_bin_reverse16(i) IGNORE_FORMAT_WARNING(xprintf("%016b", bitrev16(i)))
#define print_bin_reverse32(i) IGNORE_FORMAT_WARNING(xprintf("%032lb", bitrev32(i)))
/* print value utility */
#define print_val_dec(v) xprintf(#v ": %u\n", v)
#define print_val_decs(v) xprintf(#v ": %d\n", v)
#define print_val_hex8(v) xprintf(#v ": %X\n", v)
#define print_val_hex16(v) xprintf(#v ": %02X\n", v)
#define print_val_hex32(v) xprintf(#v ": %04lX\n", v)
#define print_val_bin8(v) IGNORE_FORMAT_WARNING(xprintf(#v ": %08b\n", v))
#define print_val_bin16(v) IGNORE_FORMAT_WARNING(xprintf(#v ": %016b\n", v))
#define print_val_bin32(v) IGNORE_FORMAT_WARNING(xprintf(#v ": %032lb\n", v))
#define print_val_bin_reverse8(v) IGNORE_FORMAT_WARNING(xprintf(#v ": %08b\n", bitrev(v)))
#define print_val_bin_reverse16(v) IGNORE_FORMAT_WARNING(xprintf(#v ": %016b\n", bitrev16(v)))
#define print_val_bin_reverse32(v) IGNORE_FORMAT_WARNING(xprintf(#v ": %032lb\n", bitrev32(v)))
// User print disables the normal print messages in the body of QMK/TMK code and
// is meant as a lightweight alternative to NOPRINT. Use it when you only want to do
// a spot of debugging but lack flash resources for allowing all of the codebase to
// print (and store their wasteful strings).
//
// !!! DO NOT USE USER PRINT CALLS IN THE BODY OF QMK/TMK !!!
2019-08-30 11:19:03 -07:00
/* decimal */
#define uprint_dec(i) uprintf("%u", i)
#define uprint_decs(i) uprintf("%d", i)
/* hex */
#define uprint_hex4(i) uprintf("%X", i)
#define uprint_hex8(i) uprintf("%02X", i)
#define uprint_hex16(i) uprintf("%04X", i)
#define uprint_hex32(i) uprintf("%08lX", i)
/* binary */
#define uprint_bin4(i) IGNORE_FORMAT_WARNING(uprintf("%04b", i))
#define uprint_bin8(i) IGNORE_FORMAT_WARNING(uprintf("%08b", i))
#define uprint_bin16(i) IGNORE_FORMAT_WARNING(uprintf("%016b", i))
#define uprint_bin32(i) IGNORE_FORMAT_WARNING(uprintf("%032lb", i))
#define uprint_bin_reverse8(i) IGNORE_FORMAT_WARNING(uprintf("%08b", bitrev(i)))
#define uprint_bin_reverse16(i) IGNORE_FORMAT_WARNING(uprintf("%016b", bitrev16(i)))
#define uprint_bin_reverse32(i) IGNORE_FORMAT_WARNING(uprintf("%032lb", bitrev32(i)))
/* print value utility */
#define uprint_val_dec(v) uprintf(#v ": %u\n", v)
#define uprint_val_decs(v) uprintf(#v ": %d\n", v)
#define uprint_val_hex8(v) uprintf(#v ": %X\n", v)
#define uprint_val_hex16(v) uprintf(#v ": %02X\n", v)
#define uprint_val_hex32(v) uprintf(#v ": %04lX\n", v)
#define uprint_val_bin8(v) IGNORE_FORMAT_WARNING(uprintf(#v ": %08b\n", v))
#define uprint_val_bin16(v) IGNORE_FORMAT_WARNING(uprintf(#v ": %016b\n", v))
#define uprint_val_bin32(v) IGNORE_FORMAT_WARNING(uprintf(#v ": %032lb\n", v))
#define uprint_val_bin_reverse8(v) IGNORE_FORMAT_WARNING(uprintf(#v ": %08b\n", bitrev(v)))
#define uprint_val_bin_reverse16(v) IGNORE_FORMAT_WARNING(uprintf(#v ": %016b\n", bitrev16(v)))
#define uprint_val_bin_reverse32(v) IGNORE_FORMAT_WARNING(uprintf(#v ": %032lb\n", bitrev32(v)))