qmk_firmware/keyboards/sx60/sx60.h

83 lines
4.5 KiB
C
Raw Normal View History

#ifndef SX60_H
#define SX60_H
#include "quantum.h"
#include <stdint.h>
#include <stdbool.h>
#include "i2c_master.h"
#include <util/delay.h>
/* I2C aliases and register addresses (see "mcp23018.md") */
#define I2C_ADDR 0b0100000
#define I2C_TIMEOUT 100
#define IODIRA 0x00 /* i/o direction register */
#define IODIRB 0x01
#define GPPUA 0x0C /* GPIO pull-up resistor register */
#define GPPUB 0x0D
#define GPIOA 0x12 /* general purpose i/o port register (write modifies OLAT) */
#define GPIOB 0x13
#define OLATA 0x14 /* output latch register */
#define OLATB 0x15
extern uint8_t mcp23018_status;
uint8_t init_mcp23018(void);
#define LAYOUT( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, \
K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, K43, K44, \
K45, K46, K47, K48, K49, K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, \
K60, K61, K62, K63, K64, K65, K66, K67, K68, K69, K70, K71 \
) { \
{ K00, K01, K02, K03, K04, K05, K06, KC_NO, K07, K08, K09, K10, K11, K12, K13, K14 }, \
{ K15, K16, K17, K18, K19, K20, K21, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29 }, \
{ K30, K31, K32, K33, K34, K35, K36, KC_NO, K37, K38, K39, K40, K41, K42, K43, K44 }, \
{ K45, K46, K47, K48, K49, K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K59 }, \
{ K60, K61, K62, K63, K64, K65, KC_NO, KC_NO, K66, K67, K68, K69, K70, K71, KC_NO, KC_NO } \
}
#define LAYOUT_ansi_split_bs_rshift( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, \
K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, K43, \
K44, K45, K46, K47, K48, K49, K50, K51, K52, K53, K54, K55, K56, K57, \
K58, K59, K60, K61, K62, K63, K64, K65, K66, K67, K68, K69 \
) { \
{ K00, K01, K02, K03, K04, K05, K06, KC_NO, K07, K08, K09, K10, K11, K12, K13, K14 }, \
{ K15, K16, K17, K18, K19, K20, K21, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29 }, \
{ K30, K31, K32, K33, K34, K35, K36, KC_NO, K37, K38, K39, K40, K41, K42, K43, KC_NO }, \
{ K44, K45, KC_NO, K46, K47, K48, K49, K50, K51, K52, K53, K54, K55, K56, K57, K57 }, \
{ K58, K59, K60, K61, K62, K63, KC_NO, KC_NO, K64, K65, K66, K67, K68, K69, KC_NO, KC_NO } \
}
#define LAYOUT_ansi_split_bs( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, \
K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, K43, \
K44, K45, K46, K47, K48, K49, K50, K51, K52, K53, K54, K55, K56, \
K57, K58, K59, K60, K61, K62, K63, K64, K65, K66, K67, K68 \
) { \
{ K00, K01, K02, K03, K04, K05, K06, KC_NO, K07, K08, K09, K10, K11, K12, K13, K14 }, \
{ K15, K16, K17, K18, K19, K20, K21, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29 }, \
{ K30, K31, K32, K33, K34, K35, K36, KC_NO, K37, K38, K39, K40, K41, K42, K43, KC_NO }, \
{ K44, K45, KC_NO, K46, K47, K48, K49, K50, K51, K52, K53, K54, K55, K56, KC_NO, KC_NO }, \
{ K57, K58, K59, K60, K61, K62, KC_NO, KC_NO, K63, K64, K65, K66, K67, K68, KC_NO, KC_NO } \
}
#define LAYOUT_ansi_split_rshift( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, \
K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, \
K29, K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, \
K43, K44, K45, K46, K47, K48, K49, K50, K51, K52, K53, K54, K55, K56, \
K57, K58, K59, K60, K61, K62, K63, K64, K65, K66, K67, K68 \
) { \
{ K00, K01, K02, K03, K04, K05, K06, KC_NO, K07, K08, K09, K10, K11, K12, K13, K13 }, \
{ K14, K15, K16, K17, K18, K19, K20, KC_NO, K21, K22, K23, K24, K25, K26, K27, K28 }, \
{ K29, K30, K31, K32, K33, K34, K35, KC_NO, K36, K37, K38, K39, K40, K41, K42, KC_NO }, \
{ K43, K44, KC_NO, K45, K46, K47, K48, K49, K50, K51, K52, K53, K54, K55, K56, K56 }, \
{ K57, K58, K59, K60, K61, K62, KC_NO, KC_NO, K63, K64, K65, K66, K67, K68, KC_NO, KC_NO } \
}
#endif