qmk_firmware/keyboards/cradio/readme.md

34 lines
1.6 KiB
Markdown
Raw Normal View History

# Cradio keyboards
![Cradio](https://github.com/davidphilipbarr/hypergolic/raw/main/hypergarlic/ht.png)
Cradio are low-profile 34-key split-keyboards designed by [@davidphilipbarr](https://github.com/davidphilipbarr), with no diodes and direct micro-controller pin wiring.
## Keyboard Info
* Keyboard Maintainer: [davidphilipbarr](https://github.com/davidphilipbarr)
* Hardware Supported:
* [Sweep](https://github.com/davidphilipbarr/Sweep)
* [Hypergarlic](https://github.com/davidphilipbarr/hypergolic/tree/main/hypergarlic)
* Variants of the same 34-key direct pin PCB
* Hardware Availability: PCBs can be printed with gerber files from the repository
Make examples for this keyboard (after setting up your build environment):
make cradio:default
Firmware uses `EE_HANDS` split handedness by default. Each halve should be flashed once with the following:
make cradio:default:dfu-split-left
make cradio:default:dfu-split-right
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side.
* **Physical reset button**: Briefly press the reset button soldered on the PCB.
* **Keycode in layout**: Press the key mapped to `RESET` if it is configured.