fixed color detection routine in makefile

This commit is contained in:
IBNobody 2016-06-11 17:24:28 -05:00
parent 50621a2e6a
commit 1c2705eea5

View File

@ -43,7 +43,7 @@
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed). # (must have Atmel FLIP installed).
# #
# make debug = Start either simulavr or avarice as specified for debugging, # make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging. # with avr-gdb or avr-insight as the front end for debugging.
# #
# make filename.s = Just compile filename.c into the assembler code only. # make filename.s = Just compile filename.c into the assembler code only.
@ -66,7 +66,7 @@ BUILD_DIR = .build
OBJDIR = $(BUILD_DIR)/obj_$(TARGET) OBJDIR = $(BUILD_DIR)/obj_$(TARGET)
# Optimization level, can be [0, 1, 2, 3, s]. # Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size. # 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) # (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s OPT = s
@ -161,10 +161,8 @@ CFLAGS += -fshort-enums
CFLAGS += -fno-strict-aliasing CFLAGS += -fno-strict-aliasing
# add color # add color
ifeq ($(COLOR),true) ifeq ($(COLOR),true)
ifeq ("$(shell echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "") ifeq ("$(echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
CFLAGS+= -fdiagnostics-color CFLAGS+= -fdiagnostics-color
else ifeq ("$(shell echo "int main(){}" | $(CC) -fcolor-diagnostics -x c - -o /dev/null 2>&1)", "")
CFLAGS+= -fcolor-diagnostics
endif endif
endif endif
CFLAGS += -Wall CFLAGS += -Wall
@ -223,7 +221,7 @@ endif
# for use in COFF files, additional information about filenames # for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source # and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there] # files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex # -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input. # dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
@ -239,7 +237,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version. # If this is left blank, then it will use the Standard printf version.
PRINTF_LIB = PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT) #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
@ -251,7 +249,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version. # If this is left blank, then it will use the Standard scanf version.
SCANF_LIB = SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT) #SCANF_LIB = $(SCANF_LIB_FLOAT)
@ -263,7 +261,7 @@ MATH_LIB = -lm
# Each directory must be seperated by a space. # Each directory must be seperated by a space.
# Use forward slashes for directory separators. # Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes. # For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS = EXTRALIBDIRS =
@ -324,7 +322,7 @@ JTAG_DEV = /dev/com1
DEBUG_PORT = 4242 DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally # Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when # just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer. # avarice is running on a different computer.
DEBUG_HOST = localhost DEBUG_HOST = localhost
@ -358,7 +356,7 @@ endif
MSG_ERRORS_NONE = Errors: none MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin -------- MSG_BEGIN = -------- begin --------
MSG_END = -------- end -------- MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before: MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after: MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF: MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@ -396,22 +394,22 @@ ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS) ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
# Default target. # Default target.
all: all:
@$(MAKE) begin @$(MAKE) begin
@$(MAKE) gccversion @$(MAKE) gccversion
@$(MAKE) sizebefore @$(MAKE) sizebefore
@$(MAKE) clean_list # force clean each time @$(MAKE) clean_list # force clean each time
@$(MAKE) build @$(MAKE) build
@$(MAKE) sizeafter @$(MAKE) sizeafter
@$(MAKE) end @$(MAKE) end
# Quick make that doesn't clean # Quick make that doesn't clean
quick: quick:
@$(MAKE) begin @$(MAKE) begin
@$(MAKE) gccversion @$(MAKE) gccversion
@$(MAKE) sizebefore @$(MAKE) sizebefore
@$(MAKE) build @$(MAKE) build
@$(MAKE) sizeafter @$(MAKE) sizeafter
@$(MAKE) end @$(MAKE) end
# Change the build target to build a HEX file or a library. # Change the build target to build a HEX file or a library.
@ -456,12 +454,12 @@ sizeafter:
# @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | awk 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi # @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | awk 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
# Display compiler version information. # Display compiler version information.
gccversion : gccversion :
@$(SILENT) || $(CC) --version @$(SILENT) || $(CC) --version
# Program the device. # Program the device.
program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
$(PROGRAM_CMD) $(PROGRAM_CMD)
@ -492,7 +490,7 @@ endif
dfu-programmer $(MCU) erase dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash $(KEYMAP_PATH)/compiled.hex dfu-programmer $(MCU) flash $(KEYMAP_PATH)/compiled.hex
dfu-programmer $(MCU) reset dfu-programmer $(MCU) reset
dfu-start: dfu-start:
dfu-programmer $(MCU) reset dfu-programmer $(MCU) reset
dfu-programmer $(MCU) start dfu-programmer $(MCU) start
@ -514,9 +512,9 @@ endif
# Generate avr-gdb config/init file which does the following: # Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set # define the reset signal, load the target file, connect to target, and set
# a breakpoint at main(). # a breakpoint at main().
gdb-config: gdb-config:
@$(REMOVE) $(GDBINIT_FILE) @$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@ -618,7 +616,7 @@ $(OBJDIR)/%.o : %.c
$(OBJDIR)/%.o : %.cpp $(OBJDIR)/%.o : %.cpp
@mkdir -p $(@D) @mkdir -p $(@D)
@$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD) @$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD)
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ $(CC) -c $(ALL_CPPFLAGS) $< -o $@
@$(BUILD_CMD) @$(BUILD_CMD)
# Compile: create assembler files from C source files. # Compile: create assembler files from C source files.
@ -642,7 +640,7 @@ $(OBJDIR)/%.o : %.S
# Create preprocessed source for use in sending a bug report. # Create preprocessed source for use in sending a bug report.
%.i : %.c %.i : %.c
$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@ $(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
# Target: clean project. # Target: clean project.
clean: begin clean_list end clean: begin clean_list end