Convert backlight to follow driver rules pattern - update docs

This commit is contained in:
zvecr 2019-11-06 00:06:36 +00:00
parent d4c23d881f
commit 3d54b1adf0

View File

@ -6,16 +6,14 @@ QMK is able to control the brightness of these LEDs by switching them on and off
The MCU can only supply so much current to its GPIO pins. Instead of powering the backlight directly from the MCU, the backlight pin is connected to a transistor or MOSFET that switches the power to the LEDs. The MCU can only supply so much current to its GPIO pins. Instead of powering the backlight directly from the MCU, the backlight pin is connected to a transistor or MOSFET that switches the power to the LEDs.
## Driver configuration ## Feature Configuration
Most keyboards have backlighting enabled by default if they support it, but if it is not working for you, check that your `rules.mk` includes the following: Most keyboards have backlighting enabled by default if they support it, but if it is not working for you, check that your `rules.mk` includes the following:
```makefile ```makefile
BACKLIGHT_ENABLE = software # Valid driver values are 'yes,software,no' BACKLIGHT_ENABLE = yes
``` ```
See below for help on individual drivers.
## Keycodes ## Keycodes
Once enabled the following keycodes below can be used to change the backlight level. Once enabled the following keycodes below can be used to change the backlight level.
@ -51,6 +49,16 @@ Once enabled the following keycodes below can be used to change the backlight le
|`breathing_enable()` |Turns on backlight breathing | |`breathing_enable()` |Turns on backlight breathing |
|`breathing_disable()` |Turns off backlight breathing | |`breathing_disable()` |Turns off backlight breathing |
## Driver Configuration
To select which driver to use, configure your `rules.mk` with the following:
```makefile
BACKLIGHT_DRIVER = software # Valid driver values are 'pwm,software,no'
```
See below for help on individual drivers.
## Common Driver Configuration ## Common Driver Configuration
To change the behavior of the backlighting, `#define` these in your `config.h`: To change the behavior of the backlighting, `#define` these in your `config.h`:
@ -72,9 +80,9 @@ This functionality is configured at the keyboard level with the `BACKLIGHT_ON_ST
## AVR driver ## AVR driver
On AVR boards, the default driver currently sniffs the configuration to pick the best scenario. To enable it, add this to your rules.mk: On AVR boards, the default driver currently sniffs the configuration to pick the best scenario. The driver is configured by default, however the equivalent setting within rules.mk would be:
```makefile ```makefile
BACKLIGHT_ENABLE = yes BACKLIGHT_DRIVER = pwm
``` ```
### Caveats ### Caveats
@ -150,9 +158,9 @@ The breathing effect is the same as in the hardware PWM implementation.
## ARM Driver ## ARM Driver
While still in its early stages, ARM backlight support aims to eventually have feature parity with AVR. To enable it, add this to your rules.mk: While still in its early stages, ARM backlight support aims to eventually have feature parity with AVR. The driver is configured by default, however the equivalent setting within rules.mk would be:
```makefile ```makefile
BACKLIGHT_ENABLE = yes BACKLIGHT_DRIVER = pwm
``` ```
### Caveats ### Caveats
@ -176,7 +184,7 @@ To change the behavior of the backlighting, `#define` these in your `config.h`:
Emulation of PWM while running other keyboard tasks, it offers maximum hardware compatibility without extra platform configuration. The tradeoff is the backlight might jitter when the keyboard is busy. To enable, add this to your rules.mk: Emulation of PWM while running other keyboard tasks, it offers maximum hardware compatibility without extra platform configuration. The tradeoff is the backlight might jitter when the keyboard is busy. To enable, add this to your rules.mk:
```makefile ```makefile
BACKLIGHT_ENABLE = software BACKLIGHT_DRIVER = software
``` ```
### Software PWM Configuration ### Software PWM Configuration
@ -200,3 +208,29 @@ To activate multiple backlight pins, you need to add something like this to your
#undef BACKLIGHT_PIN #undef BACKLIGHT_PIN
#define BACKLIGHT_PINS { F5, B2 } #define BACKLIGHT_PINS { F5, B2 }
``` ```
## Custom Driver
To enable, add this to your rules.mk:
```makefile
BACKLIGHT_DRIVER = custom
```
When implementing the custom driver API, the provided keyboard hooks are as follows:
```c
void backlight_init_ports(void) {
// Optional - Run on startup
// - usually you want to configure pins here
}
void backlight_set(uint8_t level) {
// Optional - Run on level change
// - usually you want to respond to the new value
}
void backlight_task(void) {
// Optional - Run periodically
// - long running actions here can cause performance issues
}
```