diff --git a/keyboards/adm42/info.json b/keyboards/adm42/info.json
index 0ffebff135..14a74f9930 100644
--- a/keyboards/adm42/info.json
+++ b/keyboards/adm42/info.json
@@ -13,7 +13,8 @@
"pin": "B7"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 24
},
"matrix_pins": {
"cols": ["C6", "B6", "B5", "B4", "D7", "D6", "F0", "F1", "F4", "F5", "F6", "F7"],
diff --git a/keyboards/adm42/rev4/config.h b/keyboards/adm42/rev4/config.h
index fbf2e300ef..5553b18751 100644
--- a/keyboards/adm42/rev4/config.h
+++ b/keyboards/adm42/rev4/config.h
@@ -27,10 +27,6 @@
#define RGB_MATRIX_TYPING_HEATMAP_DECREASE_DELAY_MS 20
#define RGB_MATRIX_KEYPRESSES
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-#define RGB_MATRIX_SAT_STEP 24
-#define RGB_MATRIX_HUE_STEP 8
-#define RGB_MATRIX_VAL_STEP 16
-#define RGB_MATRIX_SPD_STEP 16
#define ENABLE_RGB_MATRIX_BREATHING
#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
diff --git a/keyboards/aleblazer/zodiark/config.h b/keyboards/aleblazer/zodiark/config.h
index 3c015aa926..7c672db4c8 100644
--- a/keyboards/aleblazer/zodiark/config.h
+++ b/keyboards/aleblazer/zodiark/config.h
@@ -40,8 +40,4 @@ along with this program. If not, see .
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
#define RGB_MATRIX_KEYPRESSES
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-#define RGB_MATRIX_HUE_STEP 8
-#define RGB_MATRIX_SAT_STEP 8
-#define RGB_MATRIX_VAL_STEP 8
-#define RGB_MATRIX_SPD_STEP 10
#endif
diff --git a/keyboards/aleblazer/zodiark/info.json b/keyboards/aleblazer/zodiark/info.json
index c014385a97..af1f6cdcef 100644
--- a/keyboards/aleblazer/zodiark/info.json
+++ b/keyboards/aleblazer/zodiark/info.json
@@ -17,7 +17,10 @@
"split_count": [34, 34]
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"matrix_pins": {
"cols": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"],
diff --git a/keyboards/basekeys/trifecta/config.h b/keyboards/basekeys/trifecta/config.h
index 9ad471915f..26e0e59795 100644
--- a/keyboards/basekeys/trifecta/config.h
+++ b/keyboards/basekeys/trifecta/config.h
@@ -52,10 +52,6 @@
# define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
# define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-# define RGB_MATRIX_HUE_STEP 8
-# define RGB_MATRIX_SAT_STEP 8
-# define RGB_MATRIX_VAL_STEP 8
-# define RGB_MATRIX_SPD_STEP 10
/* Disable the animations you don't want/need. You will need to disable a good number of these *
* because they take up a lot of space. Disable until you can successfully compile your firmware. */
diff --git a/keyboards/basekeys/trifecta/info.json b/keyboards/basekeys/trifecta/info.json
index cb3126f521..f16ef52201 100644
--- a/keyboards/basekeys/trifecta/info.json
+++ b/keyboards/basekeys/trifecta/info.json
@@ -30,6 +30,11 @@
"led_count": 80,
"max_brightness": 128
},
+ "rgb_matrix": {
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
+ },
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/blockboy/ac980mini/config.h b/keyboards/blockboy/ac980mini/config.h
index e9b841acbe..b98cb7964f 100644
--- a/keyboards/blockboy/ac980mini/config.h
+++ b/keyboards/blockboy/ac980mini/config.h
@@ -15,10 +15,6 @@
// # define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-# define RGB_MATRIX_HUE_STEP 8
-# define RGB_MATRIX_SAT_STEP 8
-# define RGB_MATRIX_VAL_STEP 8
-# define RGB_MATRIX_SPD_STEP 10
/* Enable the animations you want/need. You may need to enable only a small number of these because *
* they take up a lot of space. Enable and confirm that you can still successfully compile your firmware. */
diff --git a/keyboards/blockboy/ac980mini/info.json b/keyboards/blockboy/ac980mini/info.json
index c754176824..1134d36aeb 100644
--- a/keyboards/blockboy/ac980mini/info.json
+++ b/keyboards/blockboy/ac980mini/info.json
@@ -19,7 +19,10 @@
"pin": "B7"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"layouts": {
"LAYOUT": {
diff --git a/keyboards/checkerboards/quark_lp/config.h b/keyboards/checkerboards/quark_lp/config.h
index 383ae5c133..ca124775d7 100644
--- a/keyboards/checkerboards/quark_lp/config.h
+++ b/keyboards/checkerboards/quark_lp/config.h
@@ -27,10 +27,6 @@
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 125 // limits maximum brightness of LEDs to 125 out of 255. Higher may cause the controller to crash.
-#define RGB_MATRIX_HUE_STEP 8
-#define RGB_MATRIX_SAT_STEP 8
-#define RGB_MATRIX_VAL_STEP 8
-#define RGB_MATRIX_SPD_STEP 10
// RGB Matrix Animation modes. Explicitly enabled
// For full list of effects, see:
diff --git a/keyboards/checkerboards/quark_lp/info.json b/keyboards/checkerboards/quark_lp/info.json
index 1dee17b95f..201de629da 100644
--- a/keyboards/checkerboards/quark_lp/info.json
+++ b/keyboards/checkerboards/quark_lp/info.json
@@ -12,7 +12,10 @@
"pin": "C2"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"matrix_pins": {
"cols": ["B6", "B5", "B4", "B3", "B0", "D6", "D5", "D4", "D3", "D2", "D1", "D0"],
diff --git a/keyboards/elephant42/config.h b/keyboards/elephant42/config.h
index 60f5551a3b..0b24b63466 100644
--- a/keyboards/elephant42/config.h
+++ b/keyboards/elephant42/config.h
@@ -36,10 +36,6 @@ along with this program. If not, see .
# define RGB_MATRIX_LED_COUNT 54
# define RGB_MATRIX_SPLIT { 27, 27 }
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170
-# define RGB_MATRIX_HUE_STEP RGBLIGHT_HUE_STEP
-# define RGB_MATRIX_SAT_STEP RGBLIGHT_SAT_STEP
-# define RGB_MATRIX_VAL_STEP RGBLIGHT_VAL_STEP
-# define RGB_MATRIX_SPD_STEP 8
#endif
#ifndef OLED_FONT_H
diff --git a/keyboards/elephant42/info.json b/keyboards/elephant42/info.json
index 341d197332..4c565f5327 100644
--- a/keyboards/elephant42/info.json
+++ b/keyboards/elephant42/info.json
@@ -9,7 +9,10 @@
"device_version": "0.0.1"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 8
},
"rgblight": {
"led_count": 54,
diff --git a/keyboards/helix/rev3_4rows/config.h b/keyboards/helix/rev3_4rows/config.h
index 673e9f1ed8..3598563ab0 100644
--- a/keyboards/helix/rev3_4rows/config.h
+++ b/keyboards/helix/rev3_4rows/config.h
@@ -55,10 +55,6 @@ along with this program. If not, see .
// # define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-# define RGB_MATRIX_HUE_STEP 8
-# define RGB_MATRIX_SAT_STEP 8
-# define RGB_MATRIX_VAL_STEP 8
-# define RGB_MATRIX_SPD_STEP 10
#endif
#ifdef RGBLIGHT_ENABLE
diff --git a/keyboards/helix/rev3_4rows/info.json b/keyboards/helix/rev3_4rows/info.json
index 25a0a5a041..7c8042bb5e 100644
--- a/keyboards/helix/rev3_4rows/info.json
+++ b/keyboards/helix/rev3_4rows/info.json
@@ -9,7 +9,10 @@
"device_version": "0.0.1"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"encoder": {
"rotary": [
diff --git a/keyboards/helix/rev3_5rows/config.h b/keyboards/helix/rev3_5rows/config.h
index c1def15db6..f40999c1f7 100644
--- a/keyboards/helix/rev3_5rows/config.h
+++ b/keyboards/helix/rev3_5rows/config.h
@@ -55,10 +55,6 @@ along with this program. If not, see .
// # define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-# define RGB_MATRIX_HUE_STEP 8
-# define RGB_MATRIX_SAT_STEP 8
-# define RGB_MATRIX_VAL_STEP 8
-# define RGB_MATRIX_SPD_STEP 10
#endif
#ifdef RGBLIGHT_ENABLE
diff --git a/keyboards/helix/rev3_5rows/info.json b/keyboards/helix/rev3_5rows/info.json
index d659a879a6..12a4b618e2 100644
--- a/keyboards/helix/rev3_5rows/info.json
+++ b/keyboards/helix/rev3_5rows/info.json
@@ -9,7 +9,10 @@
"device_version": "0.0.1"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"encoder": {
"rotary": [
diff --git a/keyboards/kapl/rev1/config.h b/keyboards/kapl/rev1/config.h
index e63f8b8602..d8a87f0784 100644
--- a/keyboards/kapl/rev1/config.h
+++ b/keyboards/kapl/rev1/config.h
@@ -23,10 +23,6 @@
#endif
#ifdef RGB_MATRIX_ENABLE
-#define RGB_MATRIX_HUE_STEP 8
-#define RGB_MATRIX_SAT_STEP 16
-#define RGB_MATRIX_VAL_STEP 16
-#define RGB_MATRIX_SPD_STEP 10
// EFFECTS
#define ENABLE_RGB_MATRIX_ALPHAS_MODS
#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
diff --git a/keyboards/kapl/rev1/info.json b/keyboards/kapl/rev1/info.json
index d94c146765..eb12b78274 100644
--- a/keyboards/kapl/rev1/info.json
+++ b/keyboards/kapl/rev1/info.json
@@ -12,7 +12,8 @@
"pin": "D4"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "speed_steps": 10
},
"rgblight": {
"led_count": 88,
diff --git a/keyboards/kbdfans/baguette66/rgb/config.h b/keyboards/kbdfans/baguette66/rgb/config.h
index c495f44266..78802b19f9 100644
--- a/keyboards/kbdfans/baguette66/rgb/config.h
+++ b/keyboards/kbdfans/baguette66/rgb/config.h
@@ -61,7 +61,3 @@
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
-#define RGB_MATRIX_HUE_STEP 8
-#define RGB_MATRIX_SAT_STEP 8
-#define RGB_MATRIX_VAL_STEP 8
-#define RGB_MATRIX_SPD_STEP 10
diff --git a/keyboards/kbdfans/baguette66/rgb/info.json b/keyboards/kbdfans/baguette66/rgb/info.json
index 32a661a70b..9ac27f950a 100644
--- a/keyboards/kbdfans/baguette66/rgb/info.json
+++ b/keyboards/kbdfans/baguette66/rgb/info.json
@@ -14,7 +14,10 @@
"pin": "E6"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"matrix_pins": {
"cols": ["C6", "C7", "F7", "F6", "B0", "B1", "B2", "B3", "D0", "D1", "D2", "D3", "D5", "D4", "D6"],
diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v4/config.h b/keyboards/kbdfans/kbd67/mkiirgb/v4/config.h
index 317453e45a..2b06b9c43c 100644
--- a/keyboards/kbdfans/kbd67/mkiirgb/v4/config.h
+++ b/keyboards/kbdfans/kbd67/mkiirgb/v4/config.h
@@ -36,10 +36,6 @@
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
# define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
-# define RGB_MATRIX_HUE_STEP 8
-# define RGB_MATRIX_SAT_STEP 8
-# define RGB_MATRIX_VAL_STEP 8
-# define RGB_MATRIX_SPD_STEP 10
// RGB Matrix Animation modes. Explicitly enabled
// For full list of effects, see:
// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v4/info.json b/keyboards/kbdfans/kbd67/mkiirgb/v4/info.json
index a2e2618c81..f66a39d799 100644
--- a/keyboards/kbdfans/kbd67/mkiirgb/v4/info.json
+++ b/keyboards/kbdfans/kbd67/mkiirgb/v4/info.json
@@ -11,7 +11,10 @@
"pin": "C7"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"matrix_pins": {
"cols": ["F7", "F6", "F5", "F4", "B0", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4"],
diff --git a/keyboards/kbdfans/kbd67/mkiirgb_iso/config.h b/keyboards/kbdfans/kbd67/mkiirgb_iso/config.h
index ede122f3f2..10f0bc0ec2 100644
--- a/keyboards/kbdfans/kbd67/mkiirgb_iso/config.h
+++ b/keyboards/kbdfans/kbd67/mkiirgb_iso/config.h
@@ -26,10 +26,6 @@
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
# define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
-# define RGB_MATRIX_HUE_STEP 8
-# define RGB_MATRIX_SAT_STEP 8
-# define RGB_MATRIX_VAL_STEP 8
-# define RGB_MATRIX_SPD_STEP 10
// RGB Matrix Animation modes. Explicitly enabled
// For full list of effects, see:
// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
diff --git a/keyboards/kbdfans/kbd67/mkiirgb_iso/info.json b/keyboards/kbdfans/kbd67/mkiirgb_iso/info.json
index 4c7d09aa8e..222742ed8f 100644
--- a/keyboards/kbdfans/kbd67/mkiirgb_iso/info.json
+++ b/keyboards/kbdfans/kbd67/mkiirgb_iso/info.json
@@ -12,7 +12,10 @@
"pin": "C7"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"matrix_pins": {
"cols": ["F7", "F6", "F5", "F4", "B0", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4"],
diff --git a/keyboards/kbdfans/kbd75rgb/config.h b/keyboards/kbdfans/kbd75rgb/config.h
index 08555f63d1..6a93d118d6 100644
--- a/keyboards/kbdfans/kbd75rgb/config.h
+++ b/keyboards/kbdfans/kbd75rgb/config.h
@@ -61,7 +61,3 @@
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
-#define RGB_MATRIX_HUE_STEP 8
-#define RGB_MATRIX_SAT_STEP 8
-#define RGB_MATRIX_VAL_STEP 8
-#define RGB_MATRIX_SPD_STEP 10
diff --git a/keyboards/kbdfans/kbd75rgb/info.json b/keyboards/kbdfans/kbd75rgb/info.json
index e5b6f980d3..bf2f596f3a 100644
--- a/keyboards/kbdfans/kbd75rgb/info.json
+++ b/keyboards/kbdfans/kbd75rgb/info.json
@@ -15,7 +15,10 @@
"pin": "C7"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"matrix_pins": {
"cols": ["F7", "F6", "F5", "F4", "E6", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7"],
diff --git a/keyboards/marksard/rhymestone/rev1/config.h b/keyboards/marksard/rhymestone/rev1/config.h
index aca844bff7..9e438197fc 100644
--- a/keyboards/marksard/rhymestone/rev1/config.h
+++ b/keyboards/marksard/rhymestone/rev1/config.h
@@ -40,10 +40,6 @@ along with this program. If not, see .
// #define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
// #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
- #define RGB_MATRIX_HUE_STEP 8
- #define RGB_MATRIX_SAT_STEP 8
- #define RGB_MATRIX_VAL_STEP 8
- #define RGB_MATRIX_SPD_STEP 10
// #undef ENABLE_RGB_MATRIX_ALPHAS_MODS
// #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
diff --git a/keyboards/marksard/rhymestone/rev1/info.json b/keyboards/marksard/rhymestone/rev1/info.json
index 45e5489c99..35691b9a0b 100644
--- a/keyboards/marksard/rhymestone/rev1/info.json
+++ b/keyboards/marksard/rhymestone/rev1/info.json
@@ -9,7 +9,10 @@
"device_version": "0.2.0"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"matrix_pins": {
"cols": ["D4", "C6", "D7", "E6", "B4"],
diff --git a/keyboards/nack/config.h b/keyboards/nack/config.h
index 219494fc63..adb2cf5d87 100644
--- a/keyboards/nack/config.h
+++ b/keyboards/nack/config.h
@@ -23,9 +23,6 @@ along with this program. If not, see .
#define RGB_MATRIX_LED_COUNT 52
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 128 // Max brightness of LEDs
#define RGB_MATRIX_DEFAULT_VAL 64
- #define RGB_MATRIX_HUE_STEP 10
- #define RGB_MATRIX_SAT_STEP 10
- #define RGB_MATRIX_VAL_STEP 10
// RGB Matrix Animation modes. Explicitly enabled
// For full list of effects, see:
// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
diff --git a/keyboards/nack/info.json b/keyboards/nack/info.json
index 99d5844431..0c65f81961 100644
--- a/keyboards/nack/info.json
+++ b/keyboards/nack/info.json
@@ -13,7 +13,10 @@
"driver": "spi"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "hue_steps": 10,
+ "sat_steps": 10,
+ "val_steps": 10
},
"matrix_pins": {
"cols": ["A6", "A7", "A8", "A9", "A10", "B0", "B1", "B2", "B6", "B7", "C13", "C14", "C15"],
diff --git a/keyboards/quarkeys/z40/config.h b/keyboards/quarkeys/z40/config.h
index d50067ed98..a81cf5f708 100644
--- a/keyboards/quarkeys/z40/config.h
+++ b/keyboards/quarkeys/z40/config.h
@@ -20,9 +20,6 @@
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define RGB_DISABLE_WHEN_USB_SUSPENDED // Turn off effects when suspended
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 130 // Limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-#define RGB_MATRIX_SAT_STEP 8
-#define RGB_MATRIX_VAL_STEP 8
-#define RGB_MATRIX_SPD_STEP 10
// RGB_MATRIX effects
#define ENABLE_RGB_MATRIX_ALPHAS_MODS //Enables RGB_MATRIX_ALPHAS_MODS
diff --git a/keyboards/quarkeys/z40/info.json b/keyboards/quarkeys/z40/info.json
index bfa8da31dc..46f7be36d8 100644
--- a/keyboards/quarkeys/z40/info.json
+++ b/keyboards/quarkeys/z40/info.json
@@ -9,7 +9,10 @@
"device_version": "0.0.1"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"rgblight": {
"led_count": 47,
diff --git a/keyboards/silverbullet44/config.h b/keyboards/silverbullet44/config.h
index 437b5d9b37..290d5f510b 100644
--- a/keyboards/silverbullet44/config.h
+++ b/keyboards/silverbullet44/config.h
@@ -23,11 +23,6 @@ along with this program. If not, see .
#define RGB_MATRIX_LED_COUNT 52
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
- #define RGB_MATRIX_HUE_STEP 8
- #define RGB_MATRIX_SAT_STEP 8
- #define RGB_MATRIX_VAL_STEP 8
- #define RGB_MATRIX_SPD_STEP 8
-
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
diff --git a/keyboards/silverbullet44/info.json b/keyboards/silverbullet44/info.json
index 778d722874..241c8a688a 100644
--- a/keyboards/silverbullet44/info.json
+++ b/keyboards/silverbullet44/info.json
@@ -12,7 +12,10 @@
"pin": "D3"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 8
},
"rgblight": {
"led_count": 52,
diff --git a/keyboards/tominabox1/le_chiffre/config.h b/keyboards/tominabox1/le_chiffre/config.h
index bc1950aefe..c4ae5fc38b 100644
--- a/keyboards/tominabox1/le_chiffre/config.h
+++ b/keyboards/tominabox1/le_chiffre/config.h
@@ -42,8 +42,4 @@
#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-#define RGB_MATRIX_HUE_STEP 8
-#define RGB_MATRIX_SAT_STEP 8
-#define RGB_MATRIX_VAL_STEP 8
-#define RGB_MATRIX_SPD_STEP 10
#endif
diff --git a/keyboards/tominabox1/le_chiffre/he/info.json b/keyboards/tominabox1/le_chiffre/he/info.json
index 8c8e7f5b09..b4c02bf0e1 100644
--- a/keyboards/tominabox1/le_chiffre/he/info.json
+++ b/keyboards/tominabox1/le_chiffre/he/info.json
@@ -19,7 +19,10 @@
]
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
diff --git a/keyboards/tominabox1/le_chiffre/rev1/info.json b/keyboards/tominabox1/le_chiffre/rev1/info.json
index 32e08029d5..73b6f435a7 100644
--- a/keyboards/tominabox1/le_chiffre/rev1/info.json
+++ b/keyboards/tominabox1/le_chiffre/rev1/info.json
@@ -19,7 +19,10 @@
]
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
diff --git a/keyboards/tominabox1/le_chiffre/rev2/info.json b/keyboards/tominabox1/le_chiffre/rev2/info.json
index 0dd86e5848..44dcfdf728 100644
--- a/keyboards/tominabox1/le_chiffre/rev2/info.json
+++ b/keyboards/tominabox1/le_chiffre/rev2/info.json
@@ -19,7 +19,10 @@
]
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
diff --git a/keyboards/ungodly/launch_pad/config.h b/keyboards/ungodly/launch_pad/config.h
index 5505279b1b..f3431bd412 100644
--- a/keyboards/ungodly/launch_pad/config.h
+++ b/keyboards/ungodly/launch_pad/config.h
@@ -29,10 +29,6 @@
// # define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-# define RGB_MATRIX_HUE_STEP 8
-# define RGB_MATRIX_SAT_STEP 8
-# define RGB_MATRIX_VAL_STEP 8
-# define RGB_MATRIX_SPD_STEP 10
# define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_PINWHEEL // default mode
// RGB Matrix Animation modes. Explicitly enabled
diff --git a/keyboards/ungodly/launch_pad/info.json b/keyboards/ungodly/launch_pad/info.json
index 97f3d10407..c94b2eb1c9 100644
--- a/keyboards/ungodly/launch_pad/info.json
+++ b/keyboards/ungodly/launch_pad/info.json
@@ -9,7 +9,10 @@
"device_version": "99.9.9"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"matrix_pins": {
"cols": ["B0", "B1", "B2", "B3"],
diff --git a/keyboards/yushakobo/quick17/config.h b/keyboards/yushakobo/quick17/config.h
index a81fbb0dbe..cde3298fad 100644
--- a/keyboards/yushakobo/quick17/config.h
+++ b/keyboards/yushakobo/quick17/config.h
@@ -30,10 +30,6 @@ along with this program. If not, see .
// #define RGB_MATRIX_DEFAULT_HUE 128
// #define RGB_MATRIX_DEFAULT_SAT 255
#define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-# define RGB_MATRIX_HUE_STEP 8
-# define RGB_MATRIX_SAT_STEP 8
-# define RGB_MATRIX_VAL_STEP 8
-# define RGB_MATRIX_SPD_STEP 10
#endif
diff --git a/keyboards/yushakobo/quick17/info.json b/keyboards/yushakobo/quick17/info.json
index 3a0391dafd..564ef75a56 100644
--- a/keyboards/yushakobo/quick17/info.json
+++ b/keyboards/yushakobo/quick17/info.json
@@ -9,7 +9,10 @@
"device_version": "0.0.1"
},
"rgb_matrix": {
- "driver": "WS2812"
+ "driver": "WS2812",
+ "sat_steps": 8,
+ "val_steps": 8,
+ "speed_steps": 10
},
"rgblight": {
"led_count": 18,