fl16: Further branding updates
Signed-off-by: Daniel Schaefer <dhs@frame.work>
This commit is contained in:
Daniel Schaefer
parent
36731a4fb7
commit
666109ff8a
@ -9,10 +9,10 @@
|
||||
// Prints every second how many matrix scans were done (Frequency in Hz)
|
||||
#define DEBUG_MATRIX_SCAN_RATE
|
||||
|
||||
// Prototype for Lotus with Raspberry Pi Pico
|
||||
// Prototype for Framework Laptop 16 with Raspberry Pi Pico
|
||||
// It'll disable column drive because we need to remap some pins to there
|
||||
// SDB is mapped to GP22
|
||||
//#define PICO_LOTUS
|
||||
//#define PICO_FL16
|
||||
|
||||
// Enable serial number. Calls into lotus_serial_number_string* functions
|
||||
#define SERIAL_NUMBER
|
||||
|
||||
@ -26,7 +26,7 @@ enum lotus_keycodes {
|
||||
#define MUX_ENABLE_GPIO GP4
|
||||
#define BOOT_DONE_GPIO GP5
|
||||
// Pin SDB to enable the RGB controller
|
||||
#ifdef PICO_LOTUS
|
||||
#ifdef PICO_FL16
|
||||
// 22 only on RPi Pico because it doesn't have GP29
|
||||
#define IS31FL3743A_ENABLE_GPIO GP22
|
||||
#else
|
||||
|
||||
@ -143,7 +143,7 @@ static bool interpret_adc_row(matrix_row_t cur_matrix[], adc10ksample_t voltage,
|
||||
|
||||
// Don't update matrix on Pico to avoid messing with the debug system
|
||||
// Can't attach the matrix anyways
|
||||
//#ifdef PICO_LOTUS
|
||||
//#ifdef PICO_FL16
|
||||
//(void)key_state;
|
||||
//return false;
|
||||
//#endif
|
||||
@ -226,7 +226,7 @@ void drive_col(int col, bool high) {
|
||||
}
|
||||
|
||||
// Don't drive columns on pico because we're using these GPIOs for other purposes
|
||||
//#ifdef PICO_LOTUS
|
||||
//#ifdef PICO_FL16
|
||||
// (void)gpio;
|
||||
// return;
|
||||
//#endif
|
||||
@ -330,7 +330,6 @@ static void adc_mux_init(void) {
|
||||
* Overriding behavior of matrix_init from quantum/matrix.c
|
||||
*/
|
||||
void matrix_init_custom(void) {
|
||||
print("Initializing Lotus\n");
|
||||
backlight_enable(); // To signal "live-ness"
|
||||
|
||||
adc_mux_init();
|
||||
|
||||
@ -1,10 +1,23 @@
|
||||
# Lotus Keyboard
|
||||
# Framework Laptop 16 Keyboard
|
||||
|
||||
Keyboard input module for Lotus.
|
||||
Keyboard input modules for the Framework Laptop 16.
|
||||
|
||||
* Keyboard Maintainer: [Daniel Schaefer](https://github.com/JohnAZoidberg)
|
||||
* Hardware Supported: Framework Lotus Keyboard, Raspberry Pi Pico MCU.
|
||||
* Hardware Availability: Use Raspberry Pi Pico for now
|
||||
* Hardware Supported: Framework Laptop 16 Keyboard, Numpad and Gridpad
|
||||
* Hardware Availability: Soon available at https://frame.work/marketplace
|
||||
|
||||
## Variants
|
||||
|
||||
There are 5 different hardware variants with different number of keys and
|
||||
backlight options.
|
||||
|
||||
| Name | Size | Backlight | Keys |
|
||||
| ------- | -------- | ---------- | ---- |
|
||||
| ansi | Keyboard | RGB/White | 78 |
|
||||
| iso | Keyboard | White | 79 |
|
||||
| jis | Keyboard | White | 83 |
|
||||
| numpad | Numpad | White | 21 |
|
||||
| gridpad | Numpad | RGB | 24 |
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
@ -14,7 +27,7 @@ Make example for this keyboard (after setting up your build environment):
|
||||
qmk compile -kb lotus/numpad -km default
|
||||
qmk compile -kb lotus/gridpad -km default
|
||||
|
||||
Flashing example for this keyboard:
|
||||
Flashing example for the ANSI keyboard:
|
||||
|
||||
qmk compile -kb lotus/ansi -km default
|
||||
|
||||
@ -24,53 +37,8 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
|
||||
|
||||
Enter the bootloader in 3 ways:
|
||||
|
||||
* **On Framework Laptop 16 Keyboard**: Hold down left ALT and right ALT while installing the module
|
||||
* **On Framework Laptop 16 Numpad**: Hold down keys for 2 and 6 while installing the module
|
||||
* **On Raspberry Pi Pico**: Hold down bootsel button when plugging in
|
||||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||||
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
||||
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|
||||
|
||||
## Features
|
||||
|
||||
- Variant with per-key RGB and variant with 1-zone white backlight
|
||||
- NKRO
|
||||
|
||||
## TODO
|
||||
|
||||
- [ ] Enable backlight with IS31FL3745 (see `docs/feature_rgb_matrix.md`)
|
||||
- [ ] Split variants
|
||||
- [ ] Keyboard with 1-zone backlight
|
||||
- [x] ANSI (78 keys)
|
||||
- [x] ISO (79 keys)
|
||||
- [x] JIS (84 keys)
|
||||
- [ ] Keyboard with per-key RGB
|
||||
- [ ] Numpad with 1-zone backlight
|
||||
- [ ] Numpad with per-key RGB
|
||||
|
||||
# Notes
|
||||
|
||||
- GPIO
|
||||
- Keyboard Column driver pins
|
||||
- GPIO8 (Column 0)
|
||||
- GPIO9 (Column 1)
|
||||
- GPIO10 (Column 2)
|
||||
- GPIO11 (Column 3)
|
||||
- GPIO12 (Column 4)
|
||||
- GPIO13 (Column 5)
|
||||
- GPIO14 (Column 6)
|
||||
- GPIO15 (Column 7)
|
||||
- GPIO16 (Column 13)
|
||||
- GPIO17 (Column 12)
|
||||
- GPIO18 (Column 11)
|
||||
- GPIO19 (Column 10)
|
||||
- GPIO20 (Column 9)
|
||||
- GPIO21 (Column 8)
|
||||
- GPIO22 (Column 15)
|
||||
- GPIO23 (Column 14)
|
||||
- SGM48751
|
||||
- GPIO1 - Analog Mux Control
|
||||
- GPIO2 - Analog Mux Control
|
||||
- GPIO3 - Analog Mux Control
|
||||
- GPIO4 - Enable
|
||||
- RGB Backlight
|
||||
- GPIO26 - I2C SDA
|
||||
- GPIO27 - I2C SCL
|
||||
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|
||||
Loading…
Reference in New Issue
Block a user