[Core] Clean up ISSI drivers, Add IS31FL3736 support (#20572)

Co-authored-by: Pablo Martínez <58857054+elpekenin@users.noreply.github.com>
This commit is contained in:
Xelus22 2023-04-30 12:35:27 +10:00 committed by GitHub
parent 0d9e37d638
commit 6a619e6403
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
13 changed files with 155 additions and 36 deletions

View File

@ -419,7 +419,7 @@ endif
RGB_MATRIX_ENABLE ?= no
VALID_RGB_MATRIX_TYPES := AW20216 IS31FL3731 IS31FL3733 IS31FL3737 IS31FL3741 IS31FL3742A IS31FL3743A IS31FL3745 IS31FL3746A CKLED2001 WS2812 custom
VALID_RGB_MATRIX_TYPES := AW20216 IS31FL3731 IS31FL3733 IS31FL3736 IS31FL3737 IS31FL3741 IS31FL3742A IS31FL3743A IS31FL3745 IS31FL3746A CKLED2001 WS2812 custom
ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
ifeq ($(filter $(RGB_MATRIX_DRIVER),$(VALID_RGB_MATRIX_TYPES)),)
$(call CATASTROPHIC_ERROR,Invalid RGB_MATRIX_DRIVER,RGB_MATRIX_DRIVER="$(RGB_MATRIX_DRIVER)" is not a valid matrix type)
@ -460,6 +460,13 @@ endif
QUANTUM_LIB_SRC += i2c_master.c
endif
ifeq ($(strip $(RGB_MATRIX_DRIVER)), IS31FL3736)
OPT_DEFS += -DIS31FL3736 -DSTM32_I2C -DHAL_USE_I2C=TRUE
COMMON_VPATH += $(DRIVER_PATH)/led/issi
SRC += is31fl3736.c
QUANTUM_LIB_SRC += i2c_master.c
endif
ifeq ($(strip $(RGB_MATRIX_DRIVER)), IS31FL3737)
OPT_DEFS += -DIS31FL3737 -DSTM32_I2C -DHAL_USE_I2C=TRUE
COMMON_VPATH += $(DRIVER_PATH)/led/issi

View File

@ -156,6 +156,82 @@ const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/led/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3` for now).
---
### IS31FL3736 :id=is31fl3736
There is basic support for addressable RGB matrix lighting with the I2C IS31FL3737 RGB controller. To enable it, add this to your `rules.mk`:
```make
RGB_MATRIX_ENABLE = yes
RGB_MATRIX_DRIVER = IS31FL3736
```
You can use between 1 and 4 IS31FL3736 IC's. Do not specify `DRIVER_ADDR_<N>` defines for IC's that are not present on your keyboard.
Configure the hardware via your `config.h`:
| Variable | Description | Default |
|----------|-------------|---------|
| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
| `ISSI_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3736B only | 0 |
| `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
| `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
| `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
| `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
| `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
| `DRIVER_ADDR_3` | (Optional) Address for the third RGB driver | |
| `DRIVER_ADDR_4` | (Optional) Address for the fourth RGB driver | |
The IS31FL3736 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`ISSI_SWPULLUP`/`ISSI_CSPULLUP` are given the value of`PUR_0R`), the values that can be set to enable de-ghosting are as follows:
| `ISSI_SWPULLUP/ISSI_CSPULLUP` | Description |
|----------------------|-------------|
| `PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting |
| `PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) |
| `PUR_1KR` | The 1k Ohm resistor used during blanking period (t_NOL) |
| `PUR_2KR` | The 2k Ohm resistor used during blanking period (t_NOL) |
| `PUR_4KR` | The 4k Ohm resistor used during blanking period (t_NOL) |
| `PUR_8KR` | The 8k Ohm resistor during blanking period (t_NOL) |
| `PUR_16KR` | The 16k Ohm resistor during blanking period (t_NOL) |
| `PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) |
Here is an example using 2 drivers.
```c
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
// 0000 <-> GND
// 0101 <-> SCL
// 1010 <-> SDA
// 1111 <-> VCC
// ADDR represents A3:A0 of the 7-bit address.
// The result is: 0b101(ADDR)
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_ADDR_2 0b1010001
#define DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 30
#define DRIVER_2_LED_TOTAL 36
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
```
!> Note the parentheses, this is so when `RGB_MATRIX_LED_COUNT` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
Define these arrays listing all the LEDs in your `<keyboard>.c`:
```c
const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
* | | G location
* | | | B location
* | | | | */
{0, B_1, A_1, C_1},
....
}
```
### IS31FL3737 :id=is31fl3737
There is basic support for addressable RGB matrix lighting with the I2C IS31FL3737 RGB controller. To enable it, add this to your `rules.mk`:
@ -218,8 +294,6 @@ Here is an example using 2 drivers.
```
!> Note the parentheses, this is so when `RGB_MATRIX_LED_COUNT` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations.
Define these arrays listing all the LEDs in your `<keyboard>.c`:
```c

View File

@ -45,9 +45,7 @@ void IS31FL3218_write_register(uint8_t reg, uint8_t data) {
void IS31FL3218_write_pwm_buffer(uint8_t *pwm_buffer) {
g_twi_transfer_buffer[0] = ISSI_REG_PWM;
for (int i = 0; i < 18; i++) {
g_twi_transfer_buffer[1 + i] = pwm_buffer[i];
}
memcpy(g_twi_transfer_buffer + 1, pwm_buffer, 18);
i2c_transmit(ISSI_ADDRESS, g_twi_transfer_buffer, 19, ISSI_TIMEOUT);
}

View File

@ -123,9 +123,7 @@ void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// copy the data from i to i+15
// device will auto-increment register for data after the first byte
// thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
for (int j = 0; j < 16; j++) {
g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
}
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
#if ISSI_PERSISTENCE > 0
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {

View File

@ -111,9 +111,7 @@ void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// copy the data from i to i+15
// device will auto-increment register for data after the first byte
// thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
for (int j = 0; j < 16; j++) {
g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
}
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
#if ISSI_PERSISTENCE > 0
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {

View File

@ -129,9 +129,7 @@ bool IS31FL3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// Copy the data from i to i+15.
// Device will auto-increment register for data after the first byte
// Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
for (int j = 0; j < 16; j++) {
g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
}
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
#if ISSI_PERSISTENCE > 0
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {

View File

@ -107,9 +107,7 @@ void IS31FL3736_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// copy the data from i to i+15
// device will auto-increment register for data after the first byte
// thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
for (int j = 0; j < 16; j++) {
g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
}
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
#if ISSI_PERSISTENCE > 0
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
@ -262,16 +260,15 @@ void IS31FL3736_mono_set_led_control_register(uint8_t index, bool enabled) {
g_led_control_registers_update_required = true;
}
void IS31FL3736_update_pwm_buffers(uint8_t addr1, uint8_t addr2) {
if (g_pwm_buffer_update_required) {
void IS31FL3736_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// Firstly we need to unlock the command register and select PG1
IS31FL3736_write_register(addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
IS31FL3736_write_register(addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
IS31FL3736_write_pwm_buffer(addr1, g_pwm_buffer[0]);
// IS31FL3736_write_pwm_buffer(addr2, g_pwm_buffer[1]);
IS31FL3736_write_pwm_buffer(addr, g_pwm_buffer[index]);
}
g_pwm_buffer_update_required = false;
g_pwm_buffer_update_required[index] = false;
}
void IS31FL3736_update_led_control_registers(uint8_t addr1, uint8_t addr2) {

View File

@ -58,8 +58,8 @@ void IS31FL3736_mono_set_led_control_register(uint8_t index, bool enabled);
// (eg. from a timer interrupt).
// Call this while idle (in between matrix scans).
// If the buffer is dirty, it will update the driver with the buffer.
void IS31FL3736_update_pwm_buffers(uint8_t addr1, uint8_t addr2);
void IS31FL3736_update_led_control_registers(uint8_t addr1, uint8_t addr2);
void IS31FL3736_update_pwm_buffers(uint8_t addr, uint8_t index);
void IS31FL3736_update_led_control_registers(uint8_t addr, uint8_t index);
#define PUR_0R 0x00 // No PUR resistor
#define PUR_05KR 0x01 // 0.5k Ohm resistor

View File

@ -114,9 +114,7 @@ void IS31FL3737_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// copy the data from i to i+15
// device will auto-increment register for data after the first byte
// thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
for (int j = 0; j < 16; j++) {
g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
}
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
#if ISSI_PERSISTENCE > 0
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {

View File

@ -45,8 +45,8 @@ void IS31FL3737_set_led_control_register(uint8_t index, bool red, bool green, bo
// (eg. from a timer interrupt).
// Call this while idle (in between matrix scans).
// If the buffer is dirty, it will update the driver with the buffer.
void IS31FL3737_update_pwm_buffers(uint8_t addr1, uint8_t addr2);
void IS31FL3737_update_led_control_registers(uint8_t addr1, uint8_t addr2);
void IS31FL3737_update_pwm_buffers(uint8_t addr, uint8_t index);
void IS31FL3737_update_led_control_registers(uint8_t addr, uint8_t index);
#define PUR_0R 0x00 // No PUR resistor
#define PUR_05KR 0x01 // 0.5k Ohm resistor in t_NOL

View File

@ -104,9 +104,7 @@ void IS31FL3741_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
}
bool IS31FL3741_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// unlock the command register and select PG2
IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM0);
// Assume PG1 is already selected
for (int i = 0; i < 342; i += 18) {
if (i == 180) {
@ -222,6 +220,10 @@ void IS31FL3741_set_led_control_register(uint8_t index, bool red, bool green, bo
void IS31FL3741_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// unlock the command register and select PG2
IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM0);
IS31FL3741_write_pwm_buffer(addr, g_pwm_buffer[index]);
}

View File

@ -28,6 +28,8 @@
# include "is31fl3731.h"
#elif defined(IS31FL3733)
# include "is31fl3733.h"
#elif defined(IS31FL3736)
# include "is31fl3736.h"
#elif defined(IS31FL3737)
# include "is31fl3737.h"
#elif defined(IS31FL3741)

View File

@ -23,7 +23,7 @@
* be here if shared between boards.
*/
#if defined(IS31FL3731) || defined(IS31FL3733) || defined(IS31FL3737) || defined(IS31FL3741) || defined(IS31FLCOMMON) || defined(CKLED2001)
#if defined(IS31FL3731) || defined(IS31FL3733) || defined(IS31FL3736) || defined(IS31FL3737) || defined(IS31FL3741) || defined(IS31FLCOMMON) || defined(CKLED2001)
# include "i2c_master.h"
// TODO: Remove this at some later date
@ -72,6 +72,18 @@ static void init(void) {
# endif
# endif
# elif defined(IS31FL3736)
IS31FL3736_init(DRIVER_ADDR_1);
# if defined(DRIVER_ADDR_2)
IS31FL3736_init(DRIVER_ADDR_2);
# if defined(DRIVER_ADDR_3)
IS31FL3736_init(DRIVER_ADDR_3);
# if defined(DRIVER_ADDR_4)
IS31FL3736_init(DRIVER_ADDR_4);
# endif
# endif
# endif
# elif defined(IS31FL3737)
IS31FL3737_init(DRIVER_ADDR_1);
# if defined(DRIVER_ADDR_2)
@ -120,6 +132,8 @@ static void init(void) {
IS31FL3731_set_led_control_register(index, enabled, enabled, enabled);
# elif defined(IS31FL3733)
IS31FL3733_set_led_control_register(index, enabled, enabled, enabled);
# elif defined(IS31FL3736)
IS31FL3736_set_led_control_register(index, enabled, enabled, enabled);
# elif defined(IS31FL3737)
IS31FL3737_set_led_control_register(index, enabled, enabled, enabled);
# elif defined(IS31FL3741)
@ -156,6 +170,18 @@ static void init(void) {
# endif
# endif
# elif defined(IS31FL3736)
IS31FL3736_update_led_control_registers(DRIVER_ADDR_1, 0);
# if defined(DRIVER_ADDR_2)
IS31FL3736_update_led_control_registers(DRIVER_ADDR_2, 1);
# if defined(DRIVER_ADDR_3)
IS31FL3736_update_led_control_registers(DRIVER_ADDR_3, 2);
# if defined(DRIVER_ADDR_4)
IS31FL3736_update_led_control_registers(DRIVER_ADDR_4, 3);
# endif
# endif
# endif
# elif defined(IS31FL3737)
IS31FL3737_update_led_control_registers(DRIVER_ADDR_1, 0);
# if defined(DRIVER_ADDR_2)
@ -242,6 +268,27 @@ const rgb_matrix_driver_t rgb_matrix_driver = {
.set_color_all = IS31FL3733_set_color_all,
};
# elif defined(IS31FL3736)
static void flush(void) {
IS31FL3736_update_pwm_buffers(DRIVER_ADDR_1, 0);
# if defined(DRIVER_ADDR_2)
IS31FL3736_update_pwm_buffers(DRIVER_ADDR_2, 1);
# if defined(DRIVER_ADDR_3)
IS31FL3736_update_pwm_buffers(DRIVER_ADDR_3, 2);
# if defined(DRIVER_ADDR_4)
IS31FL3736_update_pwm_buffers(DRIVER_ADDR_4, 3);
# endif
# endif
# endif
}
const rgb_matrix_driver_t rgb_matrix_driver = {
.init = init,
.flush = flush,
.set_color = IS31FL3736_set_color,
.set_color_all = IS31FL3736_set_color_all,
};
# elif defined(IS31FL3737)
static void flush(void) {
IS31FL3737_update_pwm_buffers(DRIVER_ADDR_1, 0);