[Keyboard] Le Chiffre rev 2 and HE additions (#17377)

* chiffre refactor for new revisions

* updated led matrix config

* updated per suggestions

* add tapdance enable

* revert tapdance (none defined in the default keymaps)

* clean up rules

* add readme for HE

* remove notes in readme

* fix perm

* fix perms

* Fix spacing on readme

* fix perm

* fix perms again?
This commit is contained in:
TJ 2022-07-23 19:03:41 -05:00 committed by GitHub
parent f1ccd60458
commit c3df1775bc
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
18 changed files with 343 additions and 91 deletions

View File

@ -20,7 +20,7 @@
/* USB Device descriptor parameter */
#define VENDOR_ID 0x7431
#define PRODUCT_ID 0xD645
#define DEVICE_VER 0x0001
#define MANUFACTURER tominabox1
#define PRODUCT Le Chiffre
@ -28,19 +28,6 @@
#define MATRIX_ROWS 4
#define MATRIX_COLS 10
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B3, D4, F1, C6 }
#define MATRIX_COL_PINS { F4, F5, B0, B2, B1, B4, D7, C7, D2, F7 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION ROW2COL
@ -53,14 +40,10 @@
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* Define encoder pads */
#define ENCODERS_PAD_A { D5 }
#define ENCODERS_PAD_B { D3 }
/*
* WS2812 Underglow Matrix options
*/
#define RGB_DI_PIN F0
#define RGBLED_NUM 11
#define DRIVER_LED_TOTAL RGBLED_NUM
@ -76,53 +59,4 @@
#define RGB_MATRIX_SAT_STEP 8
#define RGB_MATRIX_VAL_STEP 8
#define RGB_MATRIX_SPD_STEP 10
// RGB Matrix Animation modes. Explicitly enabled
// For full list of effects, see:
// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
# define ENABLE_RGB_MATRIX_ALPHAS_MODS
# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
# define ENABLE_RGB_MATRIX_BREATHING
# define ENABLE_RGB_MATRIX_BAND_SAT
# define ENABLE_RGB_MATRIX_BAND_VAL
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
# define ENABLE_RGB_MATRIX_CYCLE_ALL
# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
# define ENABLE_RGB_MATRIX_DUAL_BEACON
# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
# define ENABLE_RGB_MATRIX_RAINDROPS
# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
# define ENABLE_RGB_MATRIX_HUE_BREATHING
# define ENABLE_RGB_MATRIX_HUE_PENDULUM
# define ENABLE_RGB_MATRIX_HUE_WAVE
# define ENABLE_RGB_MATRIX_PIXEL_RAIN
# define ENABLE_RGB_MATRIX_PIXEL_FLOW
# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
# define ENABLE_RGB_MATRIX_SPLASH
# define ENABLE_RGB_MATRIX_MULTISPLASH
# define ENABLE_RGB_MATRIX_SOLID_SPLASH
# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
#endif

View File

@ -0,0 +1,39 @@
/* Copyright 2022 tominabox1
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define DEVICE_VER 0x0003
/* COL2ROW, ROW2COL*/
#undef DIODE_DIRECTION
#define DIODE_DIRECTION COL2ROW
#define MATRIX_ROW_PINS { B3, D4, F1, C6 }
#define MATRIX_COL_PINS { F4, F5, B0, B2, B1, B4, D7, C7, D2, F7 }
#define UNUSED_PINS
/* Define encoder pads */
#define ENCODERS_PAD_A { D5 }
#define ENCODERS_PAD_B { D3 }
/*
* WS2812 Underglow Matrix options
*/
#define RGB_DI_PIN F0

View File

@ -0,0 +1,33 @@
/* Copyright 2022 tominabox1
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "he.h"
#ifdef RGB_MATRIX_ENABLE
led_config_t g_led_config = { {
// Key Matrix to LED Index
{ 3, 4, NO_LED, 5, 6 },
{ NO_LED, NO_LED, 10, NO_LED, NO_LED },
{ NO_LED, NO_LED, 9, NO_LED, NO_LED },
{ 2, 1, 0, 8, 7 }
}, {
// LED Index to Physical Position
{ 128, 64 }, { 77, 64 }, { 0, 48 }, { 0, 0 }, { 115, 0 }, { 166, 0 }, { 255, 0 }, { 255, 48 }, { 178, 64 }, { 128, 40 }, { 128, 30 }
}, {
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2
} };
#endif

View File

@ -0,0 +1,33 @@
/* Copyright 2022 tominabox1
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define XXX KC_NO
#define LAYOUT( \
K00, K01, K02, K03, K04, K38, K05, K06, K07, K08, K09, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
K32, K34, K35, K37 \
) \
{ \
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 }, \
{ XXX, XXX, K32, XXX, K34, K35, XXX, K37, K38, XXX } \
}

View File

@ -0,0 +1 @@
The HE firmware is for the Hotswap Edition (HE) PCB by @nasp, available at checkerboards.xyz.

View File

@ -0,0 +1,22 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = yes
RGB_MATRIX_ENABLE = yes
RGB_MATRIX_DRIVER = WS2812
LTO_ENABLE = yes

View File

@ -144,13 +144,14 @@ void render_mod_status(uint8_t modifiers) {
oled_write_ln_P(PSTR("GUI"), (modifiers & MOD_MASK_GUI));
}
bool oled_task_user(void) {
void oled_task_keymap(void) {
render_lechiffre_logo();
oled_set_cursor(0,3);
// render_layer_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc)
render_mod_status(get_mods()|get_oneshot_mods());
render_keylock_status(host_keyboard_led_state());
render_keylogger_status();
return false;
}

View File

@ -4,12 +4,18 @@
Le Chiffre (ironically, "the number" in French is a 30% keyboard designed by tominabox1. The purpose of the board is to provide a platform for MX and Choc ergo in one package for when ones wrists need a break. The board supports an RGB LED strip with DI on port F0. The board is also fitted with support for run-of-the-mill .91" OLED and EC11 rotary encoder.
There are 3 PCB revisions: Rev 1 (Original), Rev 2 (P3D version sold with the Le Chiffre Plus), and HE (Hotswap Edition from Checkerboards.xyz).
By default the OLED is **disabled**. This is to prevent issues with operation when one is not installed. Be sure to enable the OLED in the rules.mk file if you have one installed!
* Keyboard Maintainer: [TJ Campie](https://github.com/tominabox1)
* Hardware Supported: Le Chiffre (source not available at this time)
* Hardware Supported: [Le Chiffre](https://github.com/tominabox1/Le-Chiffre-Keyboard)
* Hardware Availability: Bring your own case.
Make example for this keyboard (after setting up your build environment):
make tominabox1/le_chiffre:default
make tominabox1/le_chiffre/rev1:default
make tominabox1/le_chiffre/rev2:default
make tominabox1/le_chiffre/he:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -0,0 +1,44 @@
/* Copyright 2020 tominabox1
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define DEVICE_VER 0x0001
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B3, D4, F1, C6 }
#define MATRIX_COL_PINS { F4, F5, B0, B2, B1, B4, D7, C7, D2, F7 }
#define UNUSED_PINS
/* Define encoder pads */
#define ENCODERS_PAD_A { D5 }
#define ENCODERS_PAD_B { D3 }
/*
* WS2812 Underglow Matrix options
*/
#define RGB_DI_PIN F0

View File

@ -13,7 +13,7 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "le_chiffre.h"
#include "rev1.h"
#ifdef RGB_MATRIX_ENABLE
led_config_t g_led_config = { {

View File

@ -0,0 +1,23 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = yes
RGB_MATRIX_ENABLE = yes
RGB_MATRIX_DRIVER = WS2812
LTO_ENABLE = yes

View File

@ -0,0 +1,43 @@
/* Copyright 2020 tominabox1
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
#define DEVICE_VER 0x0002
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B3, F6, F7, C7 }
#define MATRIX_COL_PINS { B2, F0, F1, F4, F5, B5, B4, D7, D6, D4 }
#define UNUSED_PINS
/* Define encoder pads */
#define ENCODERS_PAD_A { B6 }
#define ENCODERS_PAD_B { C6 }
/*
* WS2812 Underglow Matrix options
*/
#define RGB_DI_PIN B1

View File

@ -0,0 +1,2 @@
Updated v2 PCB with better plate screw clearances, ESD protection, as well as sweet sweet curvy traces.
Rev. 2.0 requires new firmware due to the pinout changing to facilitate prettier trace runs.

View File

@ -0,0 +1,33 @@
/* Copyright 2020 tominabox1
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "rev2.h"
#ifdef RGB_MATRIX_ENABLE
led_config_t g_led_config = { {
// Key Matrix to LED Index
{ 3, 4, NO_LED, 5, 6 },
{ NO_LED, NO_LED, 10, NO_LED, NO_LED },
{ NO_LED, NO_LED, 9, NO_LED, NO_LED },
{ 2, 1, 0, 8, 7 }
}, {
// LED Index to Physical Position
{ 128, 64 }, { 77, 64 }, { 0, 48 }, { 0, 0 }, { 115, 0 }, { 166, 0 }, { 255, 0 }, { 255, 48 }, { 178, 64 }, { 128, 40 }, { 128, 30 }
}, {
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2
} };
#endif

View File

@ -0,0 +1,33 @@
/* Copyright 2020 tominabox1
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define XXX KC_NO
#define LAYOUT( \
K00, K01, K02, K03, K04, K38, K05, K06, K07, K08, K09, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
K32, K34, K35, K37 \
) \
{ \
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 }, \
{ XXX, XXX, K32, XXX, K34, K35, XXX, K37, K38, XXX } \
}

View File

@ -0,0 +1,23 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = yes
RGB_MATRIX_ENABLE = yes
RGB_MATRIX_DRIVER = WS2812
LTO_ENABLE = yes

View File

@ -1,19 +1 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
NKRO_ENABLE = yes # Enable N-Key Rollover
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
ENCODER_ENABLE = yes
OLED_ENABLE = no
RGB_MATRIX_ENABLE = yes
RGB_MATRIX_DRIVER = WS2812
LTO_ENABLE = yes
DEFAULT_FOLDER = tominabox1/le_chiffre/rev1