Move matrix config to info.json, part 7 (#20020)

This commit is contained in:
Ryan 2023-03-11 00:39:56 +11:00 committed by GitHub
parent ace372d90d
commit caa8c81086
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
421 changed files with 1081 additions and 3038 deletions

View File

@ -18,14 +18,6 @@
#pragma once #pragma once
/* Planck PCB default pin-out */
#define MATRIX_ROW_PINS { B6, F7, F6, D6 }
#define MATRIX_COL_PINS { F5, F1, F0 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */ /* Locking resynchronize hack */

View File

@ -8,6 +8,11 @@
"pid": "0x00AA", "pid": "0x00AA",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F5", "F1", "F0"],
"rows": ["B6", "F7", "F6", "D6"]
},
"diode_direction": "ROW2COL",
"backlight": { "backlight": {
"pin": "B7", "pin": "B7",
"levels": 6 "levels": 6

View File

@ -3,23 +3,6 @@
#pragma once #pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { C7, C6 }
#define MATRIX_COL_PINS { F6, F7 }
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION ROW2COL
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */ /* Locking resynchronize hack */

View File

@ -8,6 +8,11 @@
"pid": "0x004A", "pid": "0x004A",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F6", "F7"],
"rows": ["C7", "C6"]
},
"diode_direction": "ROW2COL",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "atmel-dfu", "bootloader": "atmel-dfu",
"layouts": { "layouts": {

View File

@ -1,25 +0,0 @@
/* Copyright 2021 Mach Keyboards
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* key pins */
#define MATRIX_ROW_PINS { D1, D0, D4 }
#define MATRIX_COL_PINS { E6, B4, B5 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW

View File

@ -8,6 +8,11 @@
"pid": "0x4D33", "pid": "0x4D33",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["E6", "B4", "B5"],
"rows": ["D1", "D0", "D4"]
},
"diode_direction": "COL2ROW",
"backlight": { "backlight": {
"pin": "B6", "pin": "B6",
"levels": 5, "levels": 5,

View File

@ -16,14 +16,6 @@
#pragma once #pragma once
/* key matrix pins */
#define MATRIX_ROW_PINS { E6, B7, D0, D1, D2, B3 }
#define MATRIX_COL_PINS { D3, D4, D6, D7 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE #define LOCKING_SUPPORT_ENABLE

View File

@ -8,6 +8,11 @@
"pid": "0x9999", "pid": "0x9999",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["D3", "D4", "D6", "D7"],
"rows": ["E6", "B7", "D0", "D1", "D2", "B3"]
},
"diode_direction": "COL2ROW",
"encoder": { "encoder": {
"rotary": [ "rotary": [
{"pin_a": "F0", "pin_b": "F1"} {"pin_a": "F0", "pin_b": "F1"}

View File

@ -18,15 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2 }
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5, F4, F5 } // F4, F5 is dummy
#define MATRIX_ROW_PINS_RIGHT { D4, C6, D7, E6, B4 }
#define MATRIX_COL_PINS_RIGHT { B6, B2, B3, B1, F7, F6, F5, F4 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */ /* Locking resynchronize hack */

View File

@ -8,8 +8,19 @@
"pid": "0x6E55", "pid": "0x6E55",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["D4", "C6", "D7", "E6", "B4", "B5", "F4", "F5"],
"rows": ["F6", "F7", "B1", "B3", "B2"]
},
"diode_direction": "COL2ROW",
"split": { "split": {
"soft_serial_pin": "D2" "soft_serial_pin": "D2",
"matrix_pins": {
"right": {
"cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
"rows": ["D4", "C6", "D7", "E6", "B4"]
}
},
}, },
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "atmel-dfu", "bootloader": "atmel-dfu",

View File

@ -16,14 +16,7 @@
#pragma once #pragma once
/* key matrix pins */
#define MATRIX_ROW_PINS { B6 }
#define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5}
#define TAP_CODE_DELAY 10 #define TAP_CODE_DELAY 10
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE #define LOCKING_SUPPORT_ENABLE

View File

@ -8,6 +8,11 @@
"pid": "0x8585", "pid": "0x8585",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["B2", "B3", "B1", "F7", "F6", "F5"],
"rows": ["B6"]
},
"diode_direction": "COL2ROW",
"encoder": { "encoder": {
"rotary": [ "rotary": [
{"pin_a": "E6", "pin_b": "D1"} {"pin_a": "E6", "pin_b": "D1"}

View File

@ -15,10 +15,4 @@
*/ */
#pragma once #pragma once
// wiring of each half
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
#define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 }
#define DIODE_DIRECTION COL2ROW
#define TAPPING_TERM 100 #define TAPPING_TERM 100

View File

@ -8,6 +8,11 @@
"pid": "0x4C43", "pid": "0x4C43",
"device_version": "30.3.1" "device_version": "30.3.1"
}, },
"matrix_pins": {
"cols": ["B2", "B3", "B1", "F7", "F6", "F5", "F4"],
"rows": ["D4", "C6", "D7", "E6", "B4"]
},
"diode_direction": "COL2ROW",
"split": { "split": {
"soft_serial_pin": "D2" "soft_serial_pin": "D2"
}, },

View File

@ -15,10 +15,4 @@
*/ */
#pragma once #pragma once
// wiring of each half
#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 }
#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1 }
#define DIODE_DIRECTION COL2ROW
#define TAPPING_TERM 100 #define TAPPING_TERM 100

View File

@ -8,6 +8,11 @@
"pid": "0x4C53", "pid": "0x4C53",
"device_version": "30.3.1" "device_version": "30.3.1"
}, },
"matrix_pins": {
"cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1"],
"rows": ["B7", "B3", "B2", "B1", "B0"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "caterina", "bootloader": "caterina",
"layouts": { "layouts": {

View File

@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D4, C6, D7, E6 ,B4}
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
#define SELECT_SOFT_SERIAL_SPEED 1 #define SELECT_SOFT_SERIAL_SPEED 1
#define RGB_DI_PIN D3 #define RGB_DI_PIN D3

View File

@ -8,6 +8,11 @@
"pid": "0x991D", "pid": "0x991D",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2"],
"rows": ["D4", "C6", "D7", "E6", "B4"]
},
"diode_direction": "COL2ROW",
"split": { "split": {
"soft_serial_pin": "D2" "soft_serial_pin": "D2"
}, },

View File

@ -17,13 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
/* key matrix pins */
#define MATRIX_ROW_PINS { D0, D1, D2, D3 }
#define MATRIX_COL_PINS { D4, D5, D6, D7 }
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION ROW2COL
/* RGB Pins */ /* RGB Pins */
#define RGB_DI_PIN B6 #define RGB_DI_PIN B6
#define RGBLED_NUM 2 #define RGBLED_NUM 2

View File

@ -8,6 +8,11 @@
"pid": "0x0015", "pid": "0x0015",
"device_version": "1.0.3" "device_version": "1.0.3"
}, },
"matrix_pins": {
"cols": ["D4", "D5", "D6", "D7"],
"rows": ["D0", "D1", "D2", "D3"]
},
"diode_direction": "ROW2COL",
"encoder": { "encoder": {
"rotary": [ "rotary": [
{"pin_a": "C6", "pin_b": "C7"} {"pin_a": "C6", "pin_b": "C7"}

View File

@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
/* pin-out */
#define MATRIX_ROW_PINS { F5 }
#define MATRIX_COL_PINS { F4, D4, B5, B6, B2, F6 }
/* ws2812 RGB LED */ /* ws2812 RGB LED */
#define RGB_DI_PIN F7 #define RGB_DI_PIN F7
@ -37,7 +32,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_EFFECT_TWINKLE
#define RGBLED_NUM 6 // Number of LEDs #define RGBLED_NUM 6 // Number of LEDs
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
#define TAPPING_TERM 200 #define TAPPING_TERM 200

View File

@ -8,6 +8,11 @@
"pid": "0x0007", "pid": "0x0007",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F4", "D4", "B5", "B6", "B2", "F6"],
"rows": ["F5"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "caterina", "bootloader": "caterina",
"layouts": { "layouts": {

View File

@ -1,41 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define MATRIX_ROW_PINS { D1, B4, B5 }
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D7, E6, C6, D2, D3 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

View File

@ -8,6 +8,11 @@
"pid": "0xCA39", "pid": "0xCA39",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6", "D7", "E6", "C6", "D2", "D3"],
"rows": ["D1", "B4", "B5"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "caterina", "bootloader": "caterina",
"layouts": { "layouts": {

View File

@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
/* Planck PCB default pin-out */
#define MATRIX_ROW_PINS { D3, F4, D0, F6, F5, D4 }
#define MATRIX_COL_PINS { D1 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */ /* Locking resynchronize hack */

View File

@ -7,6 +7,11 @@
"vid": "0xFEED", "vid": "0xFEED",
"pid": "0x3070" "pid": "0x3070"
}, },
"matrix_pins": {
"cols": ["D1"],
"rows": ["D3", "F4", "D0", "F6", "F5", "D4"]
},
"diode_direction": "COL2ROW",
"backlight": { "backlight": {
"pin": "D2" "pin": "D2"
}, },

View File

@ -1,24 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Let's Macro V2 pin-out */
#define MATRIX_ROW_PINS { F1, B2, D3 }
#define MATRIX_COL_PINS { F5, B3, D5 }
#define DIODE_DIRECTION COL2ROW

View File

@ -8,6 +8,11 @@
"pid": "0x6012", "pid": "0x6012",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F5", "B3", "D5"],
"rows": ["F1", "B2", "D3"]
},
"diode_direction": "COL2ROW",
"backlight": { "backlight": {
"pin": "D2" "pin": "D2"
}, },

View File

@ -17,13 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
#define MATRIX_ROW_PINS { E6, F0, F5, F6, F7 }
#define MATRIX_COL_PINS { F1, F4, B1, B2, B3, B7, D1, D2, D4, D6, D7, B4 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */ /* Locking resynchronize hack */

View File

@ -8,6 +8,11 @@
"pid": "0x6017", "pid": "0x6017",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F1", "F4", "B1", "B2", "B3", "B7", "D1", "D2", "D4", "D6", "D7", "B4"],
"rows": ["E6", "F0", "F5", "F6", "F7"]
},
"diode_direction": "COL2ROW",
"backlight": { "backlight": {
"pin": "D0" "pin": "D0"
}, },

View File

@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
#include "../config.h"
/* Let's Macro V2 pin-out */
#define MATRIX_ROW_PINS { C6, B1, B3, D7 }
#define MATRIX_COL_PINS { D2, F7 }
#define DIODE_DIRECTION COL2ROW
#define RGBLED_NUM 10 #define RGBLED_NUM 10
#define RGB_DI_PIN F6 #define RGB_DI_PIN F6
#define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_BREATHING

View File

@ -8,6 +8,11 @@
"pid": "0x6007", "pid": "0x6007",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["D2", "F7"],
"rows": ["C6", "B1", "B3", "D7"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "caterina", "bootloader": "caterina",
"layouts": { "layouts": {

View File

@ -18,13 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
/* Let's Split EH? pin-out */
#define MATRIX_ROW_PINS { B1, B3, D7, B4 }
#define MATRIX_COL_PINS { F4, F5, C6, B6, B5, D5 }
#define DIODE_DIRECTION COL2ROW
/* ws2812 RGB LED */ /* ws2812 RGB LED */
#define RGB_DI_PIN B2 #define RGB_DI_PIN B2
#define RGBLED_NUM 12 // Number of LEDs (each hand) #define RGBLED_NUM 12 // Number of LEDs (each hand)

View File

@ -8,6 +8,11 @@
"pid": "0xE401", "pid": "0xE401",
"device_version": "1.0.0" "device_version": "1.0.0"
}, },
"matrix_pins": {
"cols": ["F4", "F5", "C6", "B6", "B5", "D5"],
"rows": ["B1", "B3", "D7", "B4"]
},
"diode_direction": "COL2ROW",
"backlight": { "backlight": {
"pin": "B7" "pin": "B7"
}, },

View File

@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */ /* Locking resynchronize hack */

View File

@ -1,24 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
// wiring of each half
#define MATRIX_ROW_PINS { B2, B6, B4, B5 }
#define MATRIX_COL_PINS { F4, D3, D2, D1, D4 }
//#define EE_HANDS

View File

@ -8,6 +8,11 @@
"pid": "0x3060", "pid": "0x3060",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F4", "D3", "D2", "D1", "D4"],
"rows": ["B2", "B6", "B4", "B5"]
},
"diode_direction": "COL2ROW",
"split": { "split": {
"soft_serial_pin": "D0" "soft_serial_pin": "D0"
}, },

View File

@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { C7 }
#define MATRIX_COL_PINS { D6, D7, B4, B5, B6, C6}
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */ /* Locking resynchronize hack */

View File

@ -8,6 +8,11 @@
"pid": "0x6007", "pid": "0x6007",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["D6", "D7", "B4", "B5", "B6", "C6"],
"rows": ["C7"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "atmel-dfu", "bootloader": "atmel-dfu",
"layouts": { "layouts": {

View File

@ -17,22 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B6, B2, F7, F6, B3, B1, D4, D0 }
#define MATRIX_COL_PINS { B5, B4, E6, D7, C6 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN D3 #define RGB_DI_PIN D3
#ifdef RGB_DI_PIN #ifdef RGB_DI_PIN
#define RGBLED_NUM 6 #define RGBLED_NUM 6

View File

@ -8,6 +8,11 @@
"pid": "0xDFA8", "pid": "0xDFA8",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["B5", "B4", "E6", "D7", "C6"],
"rows": ["B6", "B2", "F7", "F6", "B3", "B1", "D4", "D0"]
},
"diode_direction": "COL2ROW",
"encoder": { "encoder": {
"rotary": [ "rotary": [
{"pin_a": "F4", "pin_b": "F5"} {"pin_a": "F4", "pin_b": "F5"}

View File

@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { F4, F5, F6, F7 }
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN D3 #define RGB_DI_PIN D3
#ifdef RGBLIGHT_ENABLE #ifdef RGBLIGHT_ENABLE

View File

@ -8,6 +8,11 @@
"pid": "0xDFA1", "pid": "0xDFA1",
"device_version": "0.2.0" "device_version": "0.2.0"
}, },
"matrix_pins": {
"cols": ["D4", "C6", "D7", "E6", "B4"],
"rows": ["F4", "F5", "F6", "F7"]
},
"diode_direction": "COL2ROW",
"split": { "split": {
"soft_serial_pin": "D2" "soft_serial_pin": "D2"
}, },

View File

@ -17,22 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B6, B2, F7, F6, B3, B1, F4, F5 }
#define MATRIX_COL_PINS { B5, B4, E6, D7, C6 }
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN D3 #define RGB_DI_PIN D3
#ifdef RGB_DI_PIN #ifdef RGB_DI_PIN
#define RGBLED_NUM 6 #define RGBLED_NUM 6

View File

@ -3,6 +3,11 @@
"usb": { "usb": {
"device_version": "0.1.5" "device_version": "0.1.5"
}, },
"matrix_pins": {
"cols": ["B5", "B4", "E6", "D7", "C6"],
"rows": ["B6", "B2", "F7", "F6", "B3", "B1", "F4", "F5"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "caterina" "bootloader": "caterina"
} }

View File

@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { F1, F0, E6, B2, B4, D7, D6, D4 }
#define MATRIX_COL_PINS { F4, F5, F6, F7, C7 }
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN D3 #define RGB_DI_PIN D3
#ifdef RGB_DI_PIN #ifdef RGB_DI_PIN
#define RGBLED_NUM 6 #define RGBLED_NUM 6

View File

@ -3,6 +3,11 @@
"usb": { "usb": {
"device_version": "0.1.0" "device_version": "0.1.0"
}, },
"matrix_pins": {
"cols": ["F4", "F5", "F6", "F7", "C7"],
"rows": ["F1", "F0", "E6", "B2", "B4", "D7", "D6", "D4"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "atmel-dfu" "bootloader": "atmel-dfu"
} }

View File

@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN D3 #define RGB_DI_PIN D3
#ifdef RGB_DI_PIN #ifdef RGB_DI_PIN
#ifndef RS_EXTRA_LED #ifndef RS_EXTRA_LED

View File

@ -8,6 +8,11 @@
"pid": "0xDFA3", "pid": "0xDFA3",
"device_version": "0.1.0" "device_version": "0.1.0"
}, },
"matrix_pins": {
"cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
"rows": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"]
},
"diode_direction": "COL2ROW",
"split": { "split": {
"soft_serial_pin": "D2" "soft_serial_pin": "D2"
}, },

View File

@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN D3 #define RGB_DI_PIN D3
#ifdef RGB_DI_PIN #ifdef RGB_DI_PIN
#define RGBLED_NUM 12 #define RGBLED_NUM 12

View File

@ -8,6 +8,11 @@
"pid": "0xDFA3", "pid": "0xDFA3",
"device_version": "0.2.0" "device_version": "0.2.0"
}, },
"matrix_pins": {
"cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
"rows": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "caterina", "bootloader": "caterina",
"layouts": { "layouts": {

View File

@ -21,12 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* USB Device descriptor parameter */ /* USB Device descriptor parameter */
#define SERIAL_NUM "Unavailable" #define SERIAL_NUM "Unavailable"
#define MATRIX_ROW_PINS { A00, A01, A02, A03, A04 }
#define MATRIX_COL_PINS { B04, B05, B06, B07, B08, B09, B10, B11, B12, B13, A05, A06, A07, A10, A11 }
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Temporary solution for matrix delay */ /* Temporary solution for matrix delay */
#define IGNORE_ATOMIC_BLOCK #define IGNORE_ATOMIC_BLOCK

View File

@ -8,6 +8,11 @@
"pid": "0xEED3", "pid": "0xEED3",
"device_version": "1.0.1" "device_version": "1.0.1"
}, },
"matrix_pins": {
"cols": ["B04", "B05", "B06", "B07", "B08", "B09", "B10", "B11", "B12", "B13", "A05", "A06", "A07", "A10", "A11"],
"rows": ["A00", "A01", "A02", "A03", "A04"]
},
"diode_direction": "COL2ROW",
"community_layouts": ["65_ansi_blocker"], "community_layouts": ["65_ansi_blocker"],
"layouts": { "layouts": {
"LAYOUT_65_ansi_blocker": { "LAYOUT_65_ansi_blocker": {

View File

@ -21,12 +21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* USB Device descriptor parameter */ /* USB Device descriptor parameter */
#define SERIAL_NUM "Unavailable" #define SERIAL_NUM "Unavailable"
#define MATRIX_ROW_PINS { B04, B05, B06, B07, B08, B09, A10, A11, B10, B11, B12 }
#define MATRIX_COL_PINS { A00, A01, A02, A03, A04, A05, A06, A07 }
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Temporary solution for matrix delay */ /* Temporary solution for matrix delay */
#define IGNORE_ATOMIC_BLOCK #define IGNORE_ATOMIC_BLOCK

View File

@ -8,6 +8,11 @@
"pid": "0xEED2", "pid": "0xEED2",
"device_version": "1.0.1" "device_version": "1.0.1"
}, },
"matrix_pins": {
"cols": ["A00", "A01", "A02", "A03", "A04", "A05", "A06", "A07"],
"rows": ["B04", "B05", "B06", "B07", "B08", "B09", "A10", "A11", "B10", "B11", "B12"]
},
"diode_direction": "COL2ROW",
"layouts": { "layouts": {
"LAYOUT": { "LAYOUT": {
"layout": [ "layout": [

View File

@ -16,15 +16,6 @@
#pragma once #pragma once
/*
* Keyboard Matrix Assignments
*/
#define MATRIX_ROW_PINS { D4 }
#define MATRIX_COL_PINS { D2, D1, D0 }
#define DIODE_DIRECTION ROW2COL
#define RGB_DI_PIN B1 #define RGB_DI_PIN B1
#define RGBLED_NUM 2 #define RGBLED_NUM 2
#define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_HUE_STEP 8

View File

@ -8,6 +8,11 @@
"pid": "0x0000", "pid": "0x0000",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["D2", "D1", "D0"],
"rows": ["D4"]
},
"diode_direction": "ROW2COL",
"backlight": { "backlight": {
"pin": "B6" "pin": "B6"
}, },

View File

@ -16,15 +16,6 @@
#pragma once #pragma once
/*
* Keyboard Matrix Assignments
*/
#define MATRIX_ROW_PINS { D4 }
#define MATRIX_COL_PINS { D2, D1, D0 }
#define DIODE_DIRECTION ROW2COL
#define RGB_DI_PIN B1 #define RGB_DI_PIN B1
#define RGBLED_NUM 5 #define RGBLED_NUM 5
#define RGBLIGHT_LED_MAP {4, 0, 1, 2, 3} #define RGBLIGHT_LED_MAP {4, 0, 1, 2, 3}

View File

@ -8,6 +8,11 @@
"pid": "0x0000", "pid": "0x0000",
"device_version": "0.0.2" "device_version": "0.0.2"
}, },
"matrix_pins": {
"cols": ["D2", "D1", "D0"],
"rows": ["D4"]
},
"diode_direction": "ROW2COL",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "atmel-dfu", "bootloader": "atmel-dfu",
"layouts": { "layouts": {

View File

@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS \
{ C7, F0, F1, F4, F5, F6 }
#define MATRIX_COL_PINS \
{ B4, D7, D6, D4, C6, D5, D3, D2, D1, D0, B7, B3, B2, B1, B0, E6, F7 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */ /* Locking resynchronize hack */

View File

@ -8,6 +8,11 @@
"pid": "0x0001", "pid": "0x0001",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["B4", "D7", "D6", "D4", "C6", "D5", "D3", "D2", "D1", "D0", "B7", "B3", "B2", "B1", "B0", "E6", "F7"],
"rows": ["C7", "F0", "F1", "F4", "F5", "F6"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "atmel-dfu", "bootloader": "atmel-dfu",
"layouts": { "layouts": {

View File

@ -1,51 +0,0 @@
/*
Copyright 2021 Logan Butler
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B3, B5, B6, B7, C7, C6 }
#define MATRIX_COL_PINS { B0, B1, B2, B4 }
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

View File

@ -8,6 +8,11 @@
"pid": "0x6060", "pid": "0x6060",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["B0", "B1", "B2", "B4"],
"rows": ["B3", "B5", "B6", "B7", "C7", "C6"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u2", "processor": "atmega32u2",
"bootloader": "atmel-dfu", "bootloader": "atmel-dfu",
"layouts": { "layouts": {

View File

@ -19,14 +19,6 @@
#pragma once #pragma once
/* key matrix pins */
#define MATRIX_ROW_PINS { F0, C7, C6, D5, D2, D4, D7, B7, D1 }
#define MATRIX_COL_PINS { F1, F4, F5, F6, B5, B6, B3, B2, B1, D0, B4, D6}
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN E6 #define RGB_DI_PIN E6
#ifdef RGB_DI_PIN #ifdef RGB_DI_PIN

View File

@ -8,6 +8,11 @@
"pid": "0x0106", "pid": "0x0106",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F1", "F4", "F5", "F6", "B5", "B6", "B3", "B2", "B1", "D0", "B4", "D6"],
"rows": ["F0", "C7", "C6", "D5", "D2", "D4", "D7", "B7", "D1"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "atmel-dfu", "bootloader": "atmel-dfu",
"layouts": { "layouts": {

View File

@ -15,12 +15,6 @@
*/ */
#pragma once #pragma once
#define MATRIX_ROW_PINS { F1, B7, F7, F5, F4}
#define MATRIX_COL_PINS { F6, B3, B2, B1, B0, C7, C6, B6, B5, B4, D7, D6, D4}
#define DIODE_DIRECTION ROW2COL
/* /*
* Feature disable options * Feature disable options
* These options are also useful to firmware size reduction. * These options are also useful to firmware size reduction.

View File

@ -8,6 +8,11 @@
"pid": "0x474E", "pid": "0x474E",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F6", "B3", "B2", "B1", "B0", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
"rows": ["F1", "B7", "F7", "F5", "F4"]
},
"diode_direction": "ROW2COL",
"indicators": { "indicators": {
"caps_lock": "E2" "caps_lock": "E2"
}, },

View File

@ -4,14 +4,6 @@
#pragma once #pragma once
/* key matrix pins */
#define MATRIX_ROW_PINS { E6, F0, B7, C7, D3, B0, D1 }
#define MATRIX_COL_PINS { F1, F4, F5, F6, F7, B6, B5, B4, D7, D0, D2, D6, D4, D5 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN B3 #define RGB_DI_PIN B3
#ifdef RGB_DI_PIN #ifdef RGB_DI_PIN

View File

@ -8,6 +8,11 @@
"pid": "0x8712", "pid": "0x8712",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F1", "F4", "F5", "F6", "F7", "B6", "B5", "B4", "D7", "D0", "D2", "D6", "D4", "D5"],
"rows": ["E6", "F0", "B7", "C7", "D3", "B0", "D1"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "atmel-dfu", "bootloader": "atmel-dfu",
"layouts": { "layouts": {

View File

@ -15,11 +15,6 @@
*/ */
#pragma once #pragma once
#define MATRIX_ROW_PINS {D3, D5, D4, D6, B5, B4}
#define MATRIX_COL_PINS {B7, B3, B2, B1, B0, F0, F1, F4, F5, F6, F7, C7, C6, B6, D7}
#define DIODE_DIRECTION COL2ROW
/* /*
* Feature disable options * Feature disable options
* These options are also useful to firmware size reduction. * These options are also useful to firmware size reduction.

View File

@ -8,6 +8,11 @@
"pid": "0x454D", "pid": "0x454D",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["B7", "B3", "B2", "B1", "B0", "F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "D7"],
"rows": ["D3", "D5", "D4", "D6", "B5", "B4"]
},
"diode_direction": "COL2ROW",
"indicators": { "indicators": {
"caps_lock": "E6", "caps_lock": "E6",
"scroll_lock": "D2" "scroll_lock": "D2"

View File

@ -11,11 +11,6 @@
#define MATRIX_ROWS 5 #define MATRIX_ROWS 5
#define MATRIX_COLS 15 #define MATRIX_COLS 15
#define MATRIX_ROW_PINS { B0, A1, C14, C13, A0}
#define MATRIX_COL_PINS { C15, B10, B7, B6, B5, B4, A15, A10, A9, A8, B15, B14, B13, B12, B2}
#define DIODE_DIRECTION COL2ROW
// i2c setting // i2c setting
#define I2C1_SCL_PIN B8 #define I2C1_SCL_PIN B8
#define I2C1_SDA_PIN B9 #define I2C1_SDA_PIN B9

View File

@ -1,42 +0,0 @@
/*
Copyright 2021 Matthew Dias <matthewdias@me.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* m3n3van PCB default pin-out */
#define MATRIX_ROW_PINS { B5, B6, C6, C7 }
#define MATRIX_COL_PINS { F4, F5, F6, F1, F7, F0, E6, D3, D0, D1, D2, D4, D6 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

View File

@ -8,6 +8,11 @@
"pid": "0x2323", "pid": "0x2323",
"device_version": "0.0.2" "device_version": "0.0.2"
}, },
"matrix_pins": {
"cols": ["F4", "F5", "F6", "F1", "F7", "F0", "E6", "D3", "D0", "D1", "D2", "D4", "D6"],
"rows": ["B5", "B6", "C6", "C7"]
},
"diode_direction": "COL2ROW",
"encoder": { "encoder": {
"rotary": [ "rotary": [
{"pin_a": "B4", "pin_b": "D7"} {"pin_a": "B4", "pin_b": "D7"}

View File

@ -1,42 +0,0 @@
/*
Copyright 2020 Matthew Dias <matthewdias@me.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* minim PCB default pin-out */
#define MATRIX_ROW_PINS { D6, D7, B4, B5 }
#define MATRIX_COL_PINS { F4, F5, F6, F1, F7, F0, B0, D1, B1, D2, B2, D3, D5, B3 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

View File

@ -8,6 +8,11 @@
"pid": "0xAAAA", "pid": "0xAAAA",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F4", "F5", "F6", "F1", "F7", "F0", "B0", "D1", "B1", "D2", "B2", "D3", "D5", "B3"],
"rows": ["D6", "D7", "B4", "B5"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "atmel-dfu", "bootloader": "atmel-dfu",
"layouts": { "layouts": {

View File

@ -1,42 +0,0 @@
/*
Copyright 2021 Matthew Dias <matthewdias@me.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* model-v PCB default pin-out */
#define MATRIX_ROW_PINS { D3, D5, D6, D4 }
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

View File

@ -7,6 +7,11 @@
"pid": "0x6D76", "pid": "0x6D76",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7"],
"rows": ["D3", "D5", "D6", "D4"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "atmel-dfu", "bootloader": "atmel-dfu",
"layouts": { "layouts": {

View File

@ -1,42 +0,0 @@
/*
Copyright 2021 Matthew Dias <matthewdias@me.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* m3n3van PCB default pin-out */
#define MATRIX_ROW_PINS { B1, B0, F7, F4, F1 }
#define MATRIX_COL_PINS { F0, F5, F6, D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

View File

@ -7,6 +7,11 @@
"pid": "0x2809", "pid": "0x2809",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F0", "F5", "F6", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7"],
"rows": ["B1", "B0", "F7", "F4", "F1"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "atmel-dfu", "bootloader": "atmel-dfu",
"layout_aliases": { "layout_aliases": {

View File

@ -1,33 +0,0 @@
/* Copyright 2019
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 }
#define MATRIX_COL_PINS { F4, C6, D7, F5, B4, B5 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW

View File

@ -1,4 +1,9 @@
{ {
"matrix_pins": {
"cols": ["F4", "C6", "D7", "F5", "B4", "B5"],
"rows": ["B6", "B2", "B3", "B1", "F7"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "caterina" "bootloader": "caterina"
} }

View File

@ -1,33 +0,0 @@
/* Copyright 2019
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 }
#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW

View File

@ -1,4 +1,9 @@
{ {
"matrix_pins": {
"cols": ["F6", "C6", "D7", "F5", "B4", "B5"],
"rows": ["B6", "F7", "B2", "B3", "B1"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "halfkay" "bootloader": "halfkay"
} }

View File

@ -17,14 +17,6 @@
#pragma once #pragma once
/* Matrix pins */
#define MATRIX_ROW_PINS { B4, E6 }
#define MATRIX_COL_PINS { B7, B3, F0 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Combo setup */ /* Combo setup */
#define COMBO_COUNT 1 #define COMBO_COUNT 1
#define COMBO_TERM 150 #define COMBO_TERM 150

View File

@ -8,6 +8,11 @@
"pid": "0x6060", "pid": "0x6060",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["B7", "B3", "F0"],
"rows": ["B4", "E6"]
},
"diode_direction": "COL2ROW",
"encoder": { "encoder": {
"rotary": [ "rotary": [
{"pin_a": "D2", "pin_b": "D3"}, {"pin_a": "D2", "pin_b": "D3"},

View File

@ -1,35 +0,0 @@
/*
Copyright 2021 melonbred
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D1, D6, D5, D4 }
#define MATRIX_COL_PINS { C4, C5, C6, C7, B7, B6, B5, B4, B3, B2, B1, B0 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW

View File

@ -8,6 +8,11 @@
"pid": "0x6D62", "pid": "0x6D62",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["C4", "C5", "C6", "C7", "B7", "B6", "B5", "B4", "B3", "B2", "B1", "B0"],
"rows": ["D1", "D6", "D5", "D4"]
},
"diode_direction": "COL2ROW",
"encoder": { "encoder": {
"rotary": [ "rotary": [
{"pin_a": "D3", "pin_b": "D2"} {"pin_a": "D3", "pin_b": "D2"}

View File

@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once #pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { C7, C6, B6, B0, D1, D0 }
#define MATRIX_COL_PINS { D5, D3, D4, B1, D6, D7, B4, B5, F7, F6, F5, F4, F1, F0 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */ /* Locking resynchronize hack */

View File

@ -8,6 +8,11 @@
"pid": "0x4D43", "pid": "0x4D43",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["D5", "D3", "D4", "B1", "D6", "D7", "B4", "B5", "F7", "F6", "F5", "F4", "F1", "F0"],
"rows": ["C7", "C6", "B6", "B0", "D1", "D0"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "atmel-dfu", "bootloader": "atmel-dfu",
"layouts": { "layouts": {

View File

@ -1,34 +0,0 @@
/* Copyright 2021 jfescobar18
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B1, B2, B3, B4 }
#define MATRIX_COL_PINS { C5, C4, C3, D0, C2, D1, C1, C0, D4, B0, D7, D6, B5 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW

View File

@ -8,6 +8,11 @@
"pid": "0x6D6E", "pid": "0x6D6E",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["C5", "C4", "C3", "D0", "C2", "D1", "C1", "C0", "D4", "B0", "D7", "D6", "B5"],
"rows": ["B1", "B2", "B3", "B4"]
},
"diode_direction": "COL2ROW",
"processor": "atmega328p", "processor": "atmega328p",
"bootloader": "usbasploader", "bootloader": "usbasploader",
"layouts": { "layouts": {

View File

@ -16,23 +16,6 @@
#pragma once #pragma once
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B7, B5, B4, D7, D6, B3, B2 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* RGB Underglow */ /* RGB Underglow */
#define RGB_DI_PIN F7 #define RGB_DI_PIN F7
#ifdef RGB_DI_PIN #ifdef RGB_DI_PIN

View File

@ -8,6 +8,11 @@
"pid": "0x3C4D", "pid": "0x3C4D",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F0", "F1", "E6", "C7", "C6", "B6", "D4", "B1", "B0", "B7", "B5", "B4", "D7", "D6", "B3", "B2"],
"rows": ["D0", "D1", "D2", "D3", "D5"]
},
"diode_direction": "COL2ROW",
"encoder": { "encoder": {
"rotary": [ "rotary": [
{"pin_a": "F6", "pin_b": "F5"} {"pin_a": "F6", "pin_b": "F5"}

View File

@ -1,25 +0,0 @@
/* Copyright 2022 MechBrewery
* Author: tuananhnguyen204 (https://github.com/AnthonyNguyen168) (tuananhnguyen204@gmail.com)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define MATRIX_ROW_PINS { B7, D0, F0, F1, F4 }
#define MATRIX_COL_PINS { B0, B1, B2, B3, D1, D2, D3, D6, D7, B4, B6, C6, C7, F7, F6, F5 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW

View File

@ -8,6 +8,11 @@
"pid": "0x0002", "pid": "0x0002",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["B0", "B1", "B2", "B3", "D1", "D2", "D3", "D6", "D7", "B4", "B6", "C6", "C7", "F7", "F6", "F5"],
"rows": ["B7", "D0", "F0", "F1", "F4"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4", "processor": "atmega32u4",
"bootloader": "atmel-dfu", "bootloader": "atmel-dfu",
"community_layouts": ["65_ansi_blocker"], "community_layouts": ["65_ansi_blocker"],

View File

@ -17,13 +17,6 @@
#pragma once #pragma once
#define MATRIX_ROW_PINS { B7, D0, F0, F1, F4 }
#define MATRIX_COL_PINS { B0, B1, B2, B3, D1, D2, D3, D6, D7, B4, B6, C6, C7, F7, F6, F5 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN E2 #define RGB_DI_PIN E2
#ifdef RGB_DI_PIN #ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_BREATHING

View File

@ -8,6 +8,11 @@
"pid": "0x3635", "pid": "0x3635",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["B0", "B1", "B2", "B3", "D1", "D2", "D3", "D6", "D7", "B4", "B6", "C6", "C7", "F7", "F6", "F5"],
"rows": ["B7", "D0", "F0", "F1", "F4"]
},
"diode_direction": "COL2ROW",
"indicators": { "indicators": {
"caps_lock": "D4", "caps_lock": "D4",
"on_state": 0 "on_state": 0

View File

@ -16,14 +16,6 @@
#pragma once #pragma once
/* key matrix pins */
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE #define LOCKING_SUPPORT_ENABLE

View File

@ -8,6 +8,11 @@
"pid": "0xCA60", "pid": "0xCA60",
"device_version": "0.0.1" "device_version": "0.0.1"
}, },
"matrix_pins": {
"cols": ["F0", "F1", "E6", "C7", "C6", "B7", "D4", "B1", "B0", "B5", "B4", "D7", "D6", "B3", "F4"],
"rows": ["D0", "D1", "D2", "D3", "D5"]
},
"diode_direction": "COL2ROW",
"backlight": { "backlight": {
"pin": "B6", "pin": "B6",
"levels": 5 "levels": 5

Some files were not shown because too many files have changed in this diff Show More