* Add support for Bootmagic lite when using SPLIT_HAND_PIN
* Deduplicate bootmagic_lite logic from within via
* Revert location of defaults so that user overrides still work for now
* Tidy up code slightly
* [Docs] Update layer documentation
* Add layer_state_cmp functions
* Fix cut/copy/paste issue
* Add id tags
* Apply noroads corrections
* Move Layers section to separate document
* Fix ID tag for layers
* Use better name for summary/side bar
* Fix feature page linkage
As well as a small spell error close by
* Remove paper analogy for now
* Update switch to array to allow custom values
* Add adc keymap
* update docs to reflect alignment of default 10 bit
* start conversion to USE_ADCVn
* samplerate is hella wrong...stub out for now
* basic f1 and f4 functionality
* Tidy up current changes
* Restore old pinToMux function
* Add back sample rate for supported platforms
* F0 compile fixes
* wordsmithery
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Remove reference to avr only function
Co-authored-by: Ryan <fauxpark@gmail.com>
* fix CLI section links in the Summary
* fix heading in Pointing Device doc
* fix headings in PS/2 Mouse Support doc
* add explicit section ids to I2C Master Driver doc
* reformat GPIO Controls table
Much like the I2C Master Driver doc, I found this a bit less than ideal to read. (The table was actually wider than the space available for it.)
Reformatted so each GPIO function is an H3 heading, followed by a paragraph and a table of each architecture's old-style function.
* migrate changes from I2C Master Driver doc to Japanese translation
* add explicit anchors to I2C Master Driver docs
* fix code block language markers
The language markers are case-sensitive; using the wrong case means the syntax highlighting doesn't work.
Good: ```c
Bad: ```C
* restore Japanese I2C Master Driver doc to current master
Can't update the internal tracking references accurately until the changes to the English doc are committed to master.
* add explicit anchors to edited files
* change ChibiOS/ARM to ARM/ChibiOS
Because ARM/ATSAM is also a thing that exists.
* fix code block language markers again
Used the wrong markers in a few spots. Also these are apparently always supposed to be lowercase.
* add section anchors to cli.md
* restore table formatting on GPIO Control doc
* remove changes to _summary.md
* fix some broken links
* remove duplicate and confusing material from cli.md
* Switch brazil to the 2 letter country code
* Update docs/_langs.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Rearrange the custom CSS a bit.
* fix css name
* add missing quote
* Fix up dark mode rendering. (#8392)
* Fix up dark mode rendering.
* Update index.html
* Fix up code blocks
* Fix code in page toc
* Update docs/qmk_custom_dark.css
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: skullY <skullydazed@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add support for STM32L0/L1 onboard EEPROM.
* Update docs/eeprom_driver.md
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* New feature: RGBLIGHT_LAYERS
This feature allows users to define multiple independent layers of lighting
that can be toggled on and off individually, making it easy to use your
RGB lighting to indicate things like active keyboard layer & modifier state.
* Demonstrate built in functions for layer state checking
Also link the video in the docs.
* Follow existing pattern for setting rgblight_status flags
* Eliminate rgblight_is_static_mode since it's not needed
Just check to see if the timer is enabled directly.
* Add buffer based single line pan, arbitrary byte write to buffer
* Change dirty mask to inverse of OLED_BLOCK_TYPE for future proofing larger buffer sizes
* Updating docs to include new functions
* Updating to clarify scroll vs pan
- minor typo on intro paragraph (the -> them)
- remove note about :check-size target (`make` task now does this automatically)
- heading level for Caterina commands section
- typo regarding Halfkay (come -> comes)
* [Docs] Update ISP Flashing guide
* Apply suggestions from code review
AKA why you shouldn't write docs at 2am
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update workding for planck-qmk-dfu
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* complete translation.
* Update docs/ja/feature_tap_dance.md
Update the file based on the suggestions.
* Update docs/ja/feature_tap_dance.md
Update the file based on the suggestions.
* Apply suggestions from code review
Update the file based on the suggestions.
* Apply suggestions from code review
Update the file based on the suggestions (Part 2).
* Apply suggestions from code review
Update the file based on the suggestions (Part 3).
* Apply suggestions from code review
Update the file based on the suggestions (Part 3).
* Apply suggestions from code review
Update the file based on the suggestions (Part 4).
* Apply suggestions from code review
Update the file based on the suggestions (Part 5).
ご提案いただいた修正案は全て確認できました。
続いて、コメント行の調整、「打つ・叩く」の変更、その他の修正を行います。
* fixed typo.
* Update the file based on the suggestions (Part 6).
* Update the file based on the suggestions (Part 7).
* Fixed sentence.
* Update docs/ja/feature_tap_dance.md
Update the file based on the suggestions (Part 8).
* Update the file based on the suggestions (Part 9).
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Co-Authored-By: shela <shelaf@users.noreply.github.com>
* Add link to "Useful functions" in macro docs
Help people find additional features they can activate within a macro
* Update docs/feature_macros.md
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Co-authored-by: skullydazed <skullydazed@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add detail-guide part
* some updates for easy reading
* some updates for easy reading
* some updates for easy reading
* some updates for easy reading
* some updates for easy reading
* some updates for easy reading
* some updates for easy reading
* some updates for easy reading
* update file based on comment
* update file based on comment
* update file based on comment
* update git command in header
* update files based on comments, and update git command in header
* update file based on comment
* update file based on comment
* update file based on comment
* update file based on comment
* update file based on comment
* update file based on comment
* update file based on comment
* update file based on comment
Co-Authored-By: shela <shelaf@users.noreply.github.com>
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
* Fix out of bound OLED font access
The default font is 1344 bytes, or a total of 224 glyphs (each 6-bytes wide).
OLED_FONT_END defaults to 224, which if used will then index off the end of
the font array. So either the documentation or code is wrong.
Instead of figuring out the rewording of the documentation, just change
the OLED_FONT_END default value to 223, to match the documentation and code.
* Add static assert to check array size
Build bomb if the font array size doesn't match to the defines.
* update zh-cn translate
Timestamp was added at the end of the document, it can help me manage version easier.
* fix _summary.md to utf-8
* fix _summary.md with vscode
- uprintf -> dprintf
- Fix atsam "vendor" eeprom.
- Bump Kinetis K20x to 64 bytes, too.
- Rollback Kinetis to 32 bytes as partitioning can only be done once. Add warning about changing the value.
- Change RAM-backed "fake" EEPROM implementations to match eeconfig's current usage.
- Add 24LC128 by request.
* Define default HSV and speed for RGB matrix.
* Documentation for configuration values RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT and RGB_MATRIX_STARTUP_VAL.
* Document RGB_MATRIX_STARTUP_SPD.
* Preserve the ordering.
* Implement IGNORE_MOD_TAP_INTERRUPT_PER_KEY
- Add configurable option IGNORE_MOD_TAP_INTERRUPT_PER_KEY
- Add function get_ignore_mod_tap_interrupt iff the option is enabled
Unless IGNORE_MOD_TAP_INTERRUPT_PER_KEY is defined, this patch does not affect the resulting binary.
* Add documentation for IGNORE_MOD_TAP_INTERRUPT_PER_KEY
* Left-right gradient.
* Update the comment to match the new functionality.
* CPP does integer division so this round is not necessary.
* The x-range is actually 224, update comment and use bit-shifting again.
* Update docs with gradient left-right effect and associated "DISABLE" option.
* add faq part
* add faq part
* add faq part
* add faq part
* add faq part
* update for link
* update for a punctuation
* update files based on comments
* restore removed git diff header
* correct pathname on git diff header
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update file based on comment
* update file based on comment
* update file based on comment
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Co-Authored-By: shela <shelaf@users.noreply.github.com>
Co-Authored-By: satt99 <39004890+satt99@users.noreply.github.com>
* add basic part
* update cli
* update cli
* correct links to ja document
* update files based on comments
* update for a postpositional particle
* update for a punctuation
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
Co-Authored-By: shela <shelaf@users.noreply.github.com>
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
* fix instructions for oneshot layer handling on key release
* use ONESHOT_OTHER_KEY_PRESSED instead of ONESHOT_PRESSED
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Improve support and docs for ADC driver
* Comment ADC channels
* Move to Makers and Modders section, and fix usage instructions
* Flesh out intro
* Superscript 328P note
* Fix pin_to_mux LUT
* Support USB64/1287 as well
* analogReadPin() defaults to 0V mux on invalid pin
* Update pinToMux() function documentation
* Dot
* Accept (some of) the `qmk cformat` changes
* Do clang-format properly
* More wording tweaks
* Link to encoder docs
* Update getting_started_make_guide.md
clarifying that NO_PRINT and USER_PRINT should not be used at the same time.
* Update docs/getting_started_make_guide.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add "Resynchronizing an Out-of-Sync Git Branch" doc
* Update (Git) Best Practices doc title and filename
* Rename Branch Resync doc
* fork Best Practices doc into multiple files
* Add the doc list to Git Best Practices doc
* Update sidebar
* Update internal references
* Update sidebar - add subsection
* Update Your Fork's Master page title
* title case on Git Best Practices main doc
* ... and in the Resynchronizing a Branch doc
* Please read Part 1
I worked really hard on this, okay?
* Please use branches, too.
* suggestions by mtei
* change note about adding multiple files
* note that the name given the remote repo is arbitrary
* suggestions by fauxpark
* Git Best Practices -> Best Git Practices
Reads more naturally.
* rephrase hint block regarding remote name
* rework the resynchronization instructions per mtei
* use hint boxes for reference to Part 1 doc
I may be addicted to hint boxes. I'm sorry fauxpark. 😢
* add some clarity about the upstream repo
* wordsmithing per mtei
* restyle the shell code blocks
Makes them more consistent to the other docs in this section.
* for initial commit
* for initial commit
* for initial commit
* Update led_update_kb example (#7451)
* Update led_update_kb example
* Update comment to explain pin behavior
* wordsmith
* wordsmithing 2
* Remove CR when computing BOOTLOADER_SIZE. (#7453)
* Set up language fallback for docs, and update translation guidelines (#7403)
* Set up language fallback for docs, and update translation guidelines
* Title Case
* Add ID example
* Link to emoji flag cheatsheet
* Move docs preview section to contributing.md
* Point to docs preview in the readme
* [Keyboard] Added Cans12er keyboard (#7455)
* added cans12er keyboard
* updated readme
Updated the readme to conform with the provided template from the qmk_firmware githubpage
* Update keyboards/cans12er/README.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Changed configuration
Changed the configuration based on the Change Request from PR #7455 made by github user noroadsleft
* [Keyboard] Update ATmega32A readme files to match template (#7462)
* Update atmega32a readme files to match template
* Update atmega32a readme files to match template - fixes
* Apply suggestions from code review
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Co-Authored-By: shela <shelaf@users.noreply.github.com>
* Add shift-to-invert to remaining directional RGB_* keycode pairs
RGB_MODE_FORWARD / RGB_MODE_REVERSE invert their functions when shift is held.
This change adds the same capabilities to the remaining directional RGB_*
keycode pairs. This improves consistency and provides full RGB control in a
keymap containing only one keycode from each pair.
* remove redundant variable
* fix typo
* Fix more typos
Flyspell is on now I swear!
* Install bootloadHid on macos
* Install bootloadHid on windows
* Highlight bootloadHID is now installed in docs
* Update udev rules for bootloadHID
* Install bootloadHid on some distros
* fix caterina udev filename
* Set up language fallback for docs, and update translation guidelines
* Title Case
* Add ID example
* Link to emoji flag cheatsheet
* Move docs preview section to contributing.md
* Point to docs preview in the readme
* f
* Allow overriding of all functions in wonderland.c
- needed for custom LED functions in keymap.c
* Example of layer indication via LEDs
optimize
* Use newer led_update_kb and led_update_user hooks
- these allow overriding without use of __attribute((weak))__
* Update led documentation a bit
- clarify some of the wording around how to use led_update_user
* Update led_update_user example
* Update audio example to be complete
* trailing spaces smh
* spaces
* spaces
* smh
* Less code is good
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update japanese translation of newbs.md and related documents.
* document link id change
* add `ja/` in each link
`[xxx](yyy.md)` --> `[xxx](ja/yyy.md)`
* copy docs/ja/_summary.md from umi-umi's #7248 and fix it
* Initial commit
* Fix links so that they point to the german translation
* minor changes to the wording of some sentences
* correctly capitalize second person pronouns
* Fix links so that they point to the german translation
* minor changes to the wording of some sentences
* correctly capitalize second person pronouns
* Translate newbs_learn_more_resources.md
* Clear up some phrases
* Add newbs_building_firmware.md, fix spelling
* Add newbs_building_firmware.md, fix spelling
* Update docs/de/_summary.md
Danke
* Update docs/de/README.md
* Update docs/de/_summary.md
Ich wollte es kuerzer halten damit die Navigationsleiste nicht zu breit wird, aber das ist halt die deutsche Sprache :)
* Update docs/de/newbs.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs.md
* Update docs/de/newbs_learn_more_resources.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs.md
* Update docs/de/newbs.md
* Update docs/de/newbs.md
* Update docs/de/README.md
* Update docs/de/README.md
* Update docs/de/README.md
* Update docs/de/README.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_learn_more_resources.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_learn_more_resources.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_learn_more_resources.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Apply suggestions from code review
* Add translation of newbs_flashing.md
* Apply suggestions from code review
Danke
* Add translation of Zadig-guide
* Translate newbs_testing_debugging.md to german
Co-Authored-By: Max Rumpf <max.rumpf1998@gmail.com>
Co-Authored-By: geisterfurz007 <geisterfurz007@users.noreply.github.com>
A new CLI subcommand was added, flash, which behaves very similar to the already present compile CLI comamnd, but with the added ability to target a bootloader. The command is used like so: qmk flash [-h] [-b] [-kb KEYBOARD] [-km KEYMAP] [-bl BOOTLOADER] [filename].
A -kb <keyboard> and -km <keymap> is expected, or a configurator export JSON filename. A bootloader can be specified using -bl <target>, and if left unspecified, the target is assumed to be :flash. -bl can be used to list the available bootloaders.
If -km <keymap> is provided, but no -kb <keyboard>, then a message is printed suggesting the user to run qmk list_keyboards.
* Error out when Solenid pin is not defined
Instead of defaulting to a (literally) random pin, error out instead. Because this pin may be used, or because that pin may not be exposed, or may not exist.
* Remove 'SOLENOID_ACTIVE' setting since it's not used
* Update documentation
* Add initial pass at KLE convert
* Add cli log on convert
* Move kle2xy, add absolute filepath arg support
* Add overwrite flag, and context sensitive conversion
* Update docs/cli.md
* Fix converter.py typo
* Add convert unit test
* Rename to kle2qmk
* Rename subcommand
* Rename subcommand to kle2json
* Change tests to cover rename
* Rename in __init__.py
* Update CLI docs with new subcommand name
* Fix from suggestions in PR #6898
* Help with cases of case sensitivity
* Update cli.md
* Use angle brackets to indicate required option
* Make the output text more accurate
* Fix unicode in comments
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Remove separate RGBW implementation for a unified function
* Set White to 0 in RGBW LEDs
This is just to get this working, later, proper brightness can be handled elsewhere.
* Use us instead of nanoseconds(?) since it renders correctly on web
* Remove RGBW function from arm/ws2812.h
* Remove RGBW function from arm/ws2812.c
* Formatting changes
* Add doc info
* Tidy up compatible MCUs docs
* ARM chips should have USB
* 32KB soft lower limit applies to ARM as well
* NXP is the manufacturer name, not Kinetis
* Units
* Initial ARM bitbang ws2812 driver
* Unify chibios platform to run rgblight_task
* Remove 'avr only' comments from ws2812 docs
* Remove 'avr only' comments from ws2812 docs
* Unify chibios platform to run rgblight_task - review comments
* Remove debug flags from keymap
* Add comments from review
* Add defines for STM32L0XX
* Attempt to get arm ws2812 working on multiple gcc versions
* Convert Dynamic Macro to a Core Feature
This imports the code from Dynamic Macro into the core code, and handles it, as such.
This deprecates the old method but does not remove it, for legacy support. This way, no existing user files need to be touched.
Additionally, this reorganizes the documentation to better reflect the changes.
Also, it adds user hooks to the feature so users can customize the existing functionality.
Based heavily on and closes#2976
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Cleanup based on feedback
* Add short-form keycodes and document them
- add short-form keycodes to quantum/quantum_keycodes.h
- document the new aliases in docs/feature_dynamic_macros.md
* Add Dynamic Macros section and keycodes to docs/keycodes.md
* Make anti-nesting optional
* Add documentation for DYNAMIC_MACRO_NO_NESTING option
* Fix Merge artifacts
* Fix formatting typo in docs
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Remove DYNAMIC_MACRO_RANGE as it's not needed
* Fix includes and layer var type
* Fix edge case when using One Shot Layer with Auto Shift, and it not triggering the cleanup
* Remove junk code (no longer used)
* Replace `(un)register_code` calls with `tap_code` where appropriate
* Fixed up Switch check to be more readable (less verbose)
* Simplified modifier check (if it comes back non-zero, there are mods)
* Add additional function calls for autoshift settings
* Made all variables static, since there are function calls to get their status
* Fixed up documentation
* Re-add special characters that were missed
* formatting pass
* Translated faq.md and added all other files (copy from English)
* Translated driver_installation_zadig.md in French
* Translated faq_build.md in French
* Translated faq_debug in French
* Translateed faq_general.md in French
* Translated first part of faq_keymap.md
* Renamed docs/fr-FR folder to docs/fr-fr
* Finished translation of faq_keymap.md
* Update faq_build.md
* Review (#3)
* Review
* Update docs/fr-fr/faq_keymap.md
* Update docs/fr-fr/faq_debug.md
* Fix some PR comments
Co-Authored-By: Noan Mousy <4sstylz@protonmail.ch>
Co-Authored-By: Wermeille Bastien <bastien.wermeille@gmail.com>
* Initial migration of software PWM backlight
* First pass at backlight driver docs
* Correct driver name in docs
* Run backlight_task when using BACKLIGHT_PINS
* Resolve backlight docs TODOs
* add all translation docs to translating.md
* Adding Spanish folder and README.md
* Adding Spanish to the langs file
* Adding a Spanish summary file
* Small corrections on the Spanish README file
* Adding Spanish newbs.md
* Translate some newbs documentation
* Adding the translated newbs getting started file
* Adding the building firmware file
* Adding a translated building firmware with configurator file
* Adding the flashing guide
* Adding the newbs_testing_debugging file
* Apply suggestions from code review
* QMK Configurator -> Configurador QMK
Co-Authored-By: Karey Higuera <karey.higuera@gmail.com>
* Add he-IL (Hebrew) Translation
* Add Hebrew to SUMMARY
* Try RTL
* Add RTL text
* Lowercase folder names
* Update lowercase folder in Summary
* Adding getting_started_introduction.md
* Add Proton C Conversion translation
* Add Becoming a QMK Collaborator Translation
* Add FAQ translation
* Add Hardware translation
* Documentation Best Practices translation
* Add FAQ General translation
* Align docs RTL
* Add Becoming a QMK Collaborator Translation
* Translate Getting Started - Getting Help
* Translate Getting Started With Github
* Code sections should be alligned to the left
* Code sections should be alligned to the left
* Code sections should be alligned to the left
* Revert "Code sections should be alligned to the left"
This reverts commit d0c46e90c4915ceebe7c5182aca2b75afad25df0.
* Add Markdown aligned to the left
* Update quantum_keycodes.md
* Update proton_c_conversion.md
* Translate Newbs Learn More Resourses
* Fix dunder names being accidentally bolded
* Update docs/coding_conventions_python.md
Co-Author: fauxpark <fauxpark@gmail.com>
* Change all the "names to avoid" to use backticks
* Remove obsolete note about media keys in MacOS
KC_MNXT and KC_MPRV work fine on MacOS, so this note is obsolete.
* Document behaviour of MEDIA_FAST_FORWARD/MEDIA_REWIND codes on MacOS
* Small typo fix, and make OS-dependent keycode claim less absolute
* Update docs/keycodes_basic.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Translated "CLI" documentation to German
> * Weise den User an, die Umgebungs-Variable `QMK_HOME` zu setzen, um die Firmware-Quelle anders einzustellen als `~/qmk_firmware`.
- I wasn't quite sure with this translation, as I didn't understand the context in the original English docs.
- The link to the CLI Configuration page is currently not working, due to it being missing in German.
* Update docs/de/cli.md - typo
* Update docs/de/cli.md - added Installation option into documentation
* Update docs/de/cli.md - changed article for CLI
* Update docs/de/cli.md Spelling
* Update docs/de/cli.md Spelling
* Update docs/de/cli.md de-anglicization
* Update docs/de/cli.md Spelling
* Update docs/de/cli.md Synonym
* Update docs/de/cli.md Added Installation option
* Cleaned up installation option duplicate
Co-Authored-By: kuchosauronad0 <22005492+kuchosauronad0@users.noreply.github.com>
* Update Newbs Flashing guide
For the newbs that want to start flashing
* Update flashing docs
* Misc flashing
* Attempt at flashing in french
Lets hope I didn't butcher this too badly with machine transations
* Update docs/feature_userspace.md
* Apply language suggestions from code review
* Apply suggestions from code review
* Apply additional fr lang suggestions from code review
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-Authored-By: Noan Mousy <4sstylz@protonmail.ch>
Co-Authored-By: Xavier Hahn <xavier.hahn@gmail.com>
Co-Authored-By: Vincent LE GOFF <vince.legoff@gmail.com>
* started Russian translation
* added translation of some newbs docs
* do not translate firmware word in name and transliterate names keeping original ones in brackets
* addressed review comments
* addressed more review comments
Co-Authored-By: nabokovas <bbkv@bk.ru>
* Reorganised Hand Wire Guide
Added some images and put the "Matrix" section in a hidden <details> section
* Actually adding images this time
removed .jpg from .gitignore
* Hand wire guide updated
Incomplete, but started making the guide more general. Will continue to add images (in imgur as requested)
* Removed some more images from gitignore
* testing image changes (temporary)
* Update hand_wire.md
* added techniques table
* Tweaking the table
* Finished soldering guide
* Fixed some links, change image scaling
* More of the same
* resizing images
* updated images
* Update hand_wire.md
* Resizing images
* Update hand_wire.md
* Update hand_wire.md
* Create ribbon_cable.jpg
* Minor updates to links
* Updated firmware and flashing guidelines
* Updated images to imgur links and re-added images to gitignore
* Implemented requested changes. Improved wording
* Added handwire helpers info and split KB info
* Update hand_wire.md
* Removed "the" from "the QMK toolbox"
* Fixed handwire helper table and image size
* Fixed a heading
The subcommand functions' name follows the Python convention of using
snake case, but looks odd on the command line.
Fix it by converting underscores to dashes, eg.: list_keyboards ->
list-keyboards.
While this was historically a valid possibility, nowadays, it reads
kinda weird, and the [Oxford Dictionaries Online suggests to avoid it](https://english.stackexchange.com/a/56010).
Thus, I removed it everywhere I found it.
* Add a short explanation to the troubleshooting section
While translating I noticed that the troubleshooting section could use a
little bit more explanation. @Yanfali was so kind to chime in on this on
discord and explained that this was ment for people who accidently
forget to put their board in bootloader mode, so I added this as a
possible common mistake.
Also fixed the spelling of Msys2 to MSYS2 and Halfkay to HalfKay as
these are the official spellings they use themselves.
* Update driver_installation_zadig.md
* Update driver_installation_zadig.md
English is hard.
* Update docs/driver_installation_zadig.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/driver_installation_zadig.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Translated breaking_changes.md in French
* Translated ChangeLog/20190830.md to French
* Update docs/fr-FR/breaking_changes.md
Co-Authored-By: Max Rumpf <max.rumpf1998@gmail.com>
* Fix comments from @zekth
Co-Authored-By: Vincent LE GOFF <g_n_s@hotmail.fr>
* Adds the files that will be translated
* Start translate cli_configuration.md in French
* Translated cli.md in French
* Translated getting_started_getting_help.md in French
* /getting_started_github.md
* Translated first part of contributing.md in French
* Finish translation of contributing.md
* Translated the getting_started_introduction.md in French
* Corrected issues from @zekth review
Co-Authored-By: Vincent LE GOFF <g_n_s@hotmail.fr>
* CLI command to serve docs locally
* Document it
* Default port
* Use `with` and subclass `SimpleHTTPRequestHandler` to set working dir
* Apply suggestions from code review
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Update docs/cli.md
* Translated _summary.md + newbs.md
* Translated news_best_practices.md in French
* Translated newbs_building_firmware_configurator.md in French
* Translated the file newbs_building_firmware.md in French
* Translated page newbs_flashing.md in French
* Translated the page newbs_getting_started.md in French
* Translated the page newbs_learn_more_resources.md in French
* Translated the page newbs_testing_debugging.md in French
* Change translation of split from 'séparé' to 'scindé'
* Adding the lang file for gitbook and some others tranme other translation
* Correcting typos after Gimly's review
* Some others sections on the summary
* Fix first comments from @zekth
* Fix some issues from @4sStylZ
* Fix other issues from @4sStylZ
* Fix weird phrase
* Replaced all uses of 'téléverser' by 'flash'
* Replaced all planches by board
* Fix other PR comments
* Fix comment
* [Docs] Add AVR and ARM examples to GPIO Commands
Add examples for reference for people not as well versed in microcontroller coding, such as myself.
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Add an important note about modifying user code
* Update docs/contributing.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
`list_keyboards` replicates the `make list-keyboards` by globbing for all paths
that include `rules.mk` and then removing the paths that include `keymaps`.
This basis of this cli command could be reused in the future as a util, but is
not done so here since this would be the only place that would use it currently
Resolves#6911
* Initial stab at some fake dfu-util-split-left behaviour
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Clang format fixes
* Fake eeprom init for both left and right hand
* Rework how bin/qmk handles subcommands
* qmk config wip
* Code to show all configs
* Fully working `qmk config` command
* Mark some CLI arguments so they don't pollute the config file
* Fleshed out config support, nicer subcommand support
* sync with installable cli
* pyformat
* Add a test for subcommand_modules
* Documentation for the `qmk config` command
* split config_token on space so qmk config is more predictable
* Rework how subcommands are imported
* Document `arg_only`
* Document deleting from CLI
* Document how multiple operations work
* Add cli config to the doc index
* Add tests for the cli commands
* Make running the tests more reliable
* Be more selective about building all default keymaps
* Update new-keymap to fit the new subcommand style
* Add documentation about writing CLI scripts
* Document new-keyboard
* Update docs/cli_configuration.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/cli_development.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/cli_development.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/cli_development.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Address yan's comments.
* Apply suggestions from code review
suggestions from @noahfrederick
Co-Authored-By: Noah Frederick <code@noahfrederick.com>
* Apply suggestions from code review
Co-Authored-By: Noah Frederick <code@noahfrederick.com>
* Remove pip3 from the test runner
* made tapdance dual_role general
* updated original dual_role functionality
* added toggling layer example
* Fix dual role and add alias
* Update docs about new layer tap dances
* Fix up based on feedback
* Add reset instructions for boards that use Command to the Zadig driver installation guide
* -> → →
* Apply suggestions from code review
Replace shorthand keycode names with full names
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* provide means to turn on RTP mode and set the amplitude
* new keycode HPT_CONT to turn RTP off/on
* introduce new keycodes HPT_CONI, and HPT_COND for Haptic Continuous Increase and Decrease
* support for continuous mode amplitude increase and decrease
* code cleanup
* update docs to reference new keycodes and functionality
* don't touch the keymaps
* add function prototypes
* add proper guards
* cleanup guards
* remove extra reserved
* Add Dip Switches as a core feature
* Add documentation for Dip Switch feature
* Update Preonic Rev3 to use new feature and remove custom matrix
* Apply suggestions from code review
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Remove custom matrix line completely
Rather than just disabling it
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* DIP changes
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Use better check for DIP Switch configuration
* Add to show features
* Add bitmask callback for dip switch
* Fix OLKB Boards dip switch config
* Update docs to include bitmask example
* Fix comments/documentation
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Fix issues with docs and use example from @tuzonghua
* Fix wording
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Fix example to use proper formatting
Bad, BAAAAAAD drashna!!!
* Handle dip switch initialization better
* Update atreus to current code conventions - add multi revision instead of defines
* Remove config.h duplication from user keymaps
* Add breaking change log
* Add missing pragma once
* Branch point for 2019 Aug 30 Breaking Change
* LUFA USB descriptor cleanup (#4871)
* Fix indentation
* Fix braces
* Expand descriptor headers
* Align descriptor elements
* Nicer formatting
* Tidy up preprocessor statements
* Remove VERSION_BCD redefine - LUFA_VERSION_INTEGER is currently 0x170418
* Tidy up comments
* Tweak ordering of HID report elements (no functional changes)
* We don't need all of these newlines
* Move default USB_MAX_POWER_CONSUMPTION closer to where it makes sense
* Ask nicely
* Add some more comments
* Change indentation back to 4 spaces
* Add changelog entry
* Language Keymap extras backport from ZSA fork (#6198)
* Swedish extra keymap refactor
* Fix swedish $ sign definition (#81)
* Fix br abnt2 keymap compilation error
* Add PR changelog doc
* Update PR6198.md
* Enforce clang-format (#6293)
* Enforce clang-format on commit for core files
* forgot about tests
* Migrate ACTION_LAYER_MOMENTARYs to MO() (#5176)
* Migrate ACTION_LAYER_MOMENTARYs to MO()
* Add changelog entry
* Update docs/ChangeLog/20190830/PR5176.md
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Migrate ACTION_BACKLIGHT_* to BL_*
* Add changelog
* Update docs/ChangeLog/20190830/PR6299.md
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Fix indentation
* Fix braces
* Expand descriptor headers
* Align descriptor elements
* Nicer formatting
* Tidy up preprocessor statements
* Remove VERSION_BCD redefine - LUFA_VERSION_INTEGER is currently 0x170418
* Tidy up comments
* Tweak ordering of HID report elements (no functional changes)
* We don't need all of these newlines
* Move default USB_MAX_POWER_CONSUMPTION closer to where it makes sense
* Ask nicely
* Add some more comments
* Change indentation back to 4 spaces
* Add changelog entry
* Add Zadig 101 to docs
* Add USBasp bootloader name
* Add links to the page
* Note the usual VIDs and PIDs for the bootloaders
* Add "List All Devices" note, just in case
* Talk about keyboard-specific bootloader procedures
* Send users to the new page in "Unknown Device for DFU Bootloader" section
* Halfkay bootloaders are also an exception here
* Update how_keyboards_work.md
bridged the gap between scancodes and keycodes, the doc didn't make the distinction and was ambiguous.
* Update docs/how_keyboards_work.md
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update docs/how_keyboards_work.md
fix typo
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Additional changes for Layer State typedef compatibility
* Replace biton32 with get_highest_layer in docs
* Change additional layer structure code
* Fix uGFX reference issue
* Remove dynamic_keymap check
* Where did all these extra spaces come from
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Add MAGIC_SWAP_CONTROL_LGUI and MAGIC_UNSWAP_CONTROL_LGUI keycodes
Key codes to swap and unswap the control and windows/cmd keys
* Fix issues with pull request #6110
Renamed swap/unswap lctl and lgui key codes, added key codes to swap/unswap rctl and rgui, and moved new bool inside keycode_config.h struct to the end
* Move new keycodes to the end of the enum (#6110)
* add cases for swapped control and OS keys to mod_config (#6110)
* Add new keycodes to feature_bootmagic.md (#6110)
* Add R+L swap codes to keep in parity with AG_* codes
* Extend Magic range check to include new magic codes
* Update audio docs
* Combine 2 byte ranges into 1 word for EECONFG
Fix names for Keymap config EEPROM
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_bootmagic.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Remove superfluous JTAG disable code
* 32A has differently named register
* Accidentally some operators
* 32A also has different JTAG pins
* Wrap disable_jtag() in an ifndef
* Document this new define
* Rename the define, it conflicts with a LUFA thing
Also, move the ifndef wrapping to the call in keyboard_setup()
* Improve backlight PWM pin support
* I accidentally an equals sign
* Another typo
* Order by pin number
* Throw an error if backlight pin is C4 or C5 on 16/32U4
* Use else for clarity
* Minor alignment adjustments
* Add Sections and MO(layer)/TG(layer) Example
Major changes:
1. Added sub-section headings to the portion before the examples.
2. Added a new Example 6, that allows MO(layer) and TG(layer) functionality to be embedded within tap dance functions.
Minor Changes:
1. Edited some text to better fit with new sub-headings.
* Update feature_tap_dance.md
* Update feature_tap_dance.md
* Update IS_COMMAND definition in templates to use MOD_MASK_SHIFT
* Update IS_COMMAND in docs
* Update IS_COMMAND default definition in tmk_core
* Update table in Command docs based on suggestion
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Remove the need to set NUM_OF_ENCODERS
Instead, calculate the size of the array, and use that instead
* Add hack for split common support
* Remove NUM_OF_ENCODERS from keyboard config
Can be reverted, if needed
* Initial conversion of vagrant to use qmkfm/base_container
* Fix vagrant when using docker provider
* Workaround for VirtualBox VM restarts
* Generalise Vagrant docs slightly and add FAQ
* Script to generate keymap.c from JSON file.
* Support for keymap.json
* Add a warning about the keymap.c getting overwritten.
* Fix keymap generating
* Install the python deps
* Flesh out more of the python environment
* Remove defunct json2keymap
* Style everything with yapf
* Polish up python support
* Hide json keymap.c into the .build dir
* Polish up qmk-compile-json
* Make milc work with positional arguments
* Fix a couple small things
* Fix some errors and make the CLI more understandable
* Make the qmk wrapper more robust
* Add basic QMK Doctor
* Clean up docstrings and flesh them out as needed
* remove unused compile_firmware() function
* Hightlight that sudo may be needed
Also added "dfu-programmer: no device present" in so that anyone searching for that particular error can hopefully find the page.
* Use new style of indicating a warning
* Indicate that the FAQ should be read instead of blindly using sudo
* Clarify the rules.mk setup for Unicode
* code point
Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>
* Remove "your"
Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>
* Undo a line change
Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>
* dot the comma
Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>
* Update docs/feature_unicode.md
Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>
* Fix breathing always on for soft PWM
* Remove reference to hardware PWM pins in BACKLIGHT_BREATHING description
Now, breathing will only be unsupported when Timers 1 and 3 are both used by Audio
* Document BACKLIGHT_ON_STATE and its purpose
* Fix backlight breathing on C6
* Account for ATmega32A's single TIMSK register (MT40)
* Document hardware PWM on D4 for ATmega32A
* Add C6 and D4 to BACKLIGHT_PIN description
* modify oled_driver to support SH1106
also:
- improve mechanism to specify which OLED IC we use
- comment calc_bounds()
- give OLED_COLUMN_OFFSET a default value
- inline comment re: OLED MEMORY_MODE and SH1106
- update docs/feature_oled_driver.h for SH1106 support and related changes
- docs: OLED: note we have tested SSD1306 on ARM boards (per @XScorpion2)
- define out MEMORY_MODE when using SH1106 OLED driver
* document that SSD1306 128x64 on AVR works
Per @XScorpion2: https://github.com/qmk/qmk_firmware/pull/5787#discussion_r291837842
* faq_general.md to Chinese
faq_general.md to Chinese
faq finished
* custom_quantum_functions.md to Chinese
custom_quantum_functions.md to Chinese
* custom_quantum_functions.md fix
custom_quantum_functions.md fix
* custom_quantum_functions.md fix translate
custom_quantum_functions.md fix translate
* !ver.English! _summary.md bug fix
_summary.md bug fix of English doc. add".md" behind "feature_combo"
* !ver.English! custom_quantum_functions.md fix#5869
custom_quantum_functions.md in English : delete redundant "is" . issue#5869
* !ver.English! how_keyboards_work.md link fix
change
https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_code_input
to
https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_input
"#Hexadecimal_code_input" not exist
* !English! how_keyboards_work.md add missing "t"
Tied to a specific OS a a time (need recompilation when changing OS);
change to
Tied to a specific OS at a time (need recompilation when changing OS);
* _summary.md improve translation
_summary.md improve translation
* reference_glossary.md into Chinese
reference_glossary.md into Chinese
术语表翻译，这个术语表英文版似乎不太全，应该补充英文版，并在中文版添加其他具有中国特色的术语。
I2C timing parameters were seemingly set up for an STM32F303 target MCU, at a specific clock speed. This commit allows specifying the timing parameters via config.h, allowing other STM32 MCUs to be targeted, potentially at different clock frequencies.
Alternate function modes for the I2C pins are now also configurable, allowing for remapping to other pins.
* translate docs into Mandarin Chinese
translate
faq_debug.md
into Chinese
* translate faq_build.md into Chinese
translate faq_build.md into Chinese
* faq_keymap.md to zh-cn
faq_keymap.md to zh-cn
* Adding an AUDIO_CLICKY_DELAY_DURATION configurable value to the AUDIO_CLICKY feature.
* Tweaking my community keymap to work better with my rev 4 planck.
* Increase delay for Hold-Tap register for CAPSLOCK
Because it seems that the 80ms delay wasn't too much
* Screw it, make the caps delay a define and make it configurable
* add rgblight_set_effect_range()
* implement effect range
* Arrange the order of function list in rgblight.h .
* update docs/feature_rgblight.md
* fix RGBLIGHT_RAINBOW_SWIRL_RANGE default value
* add example code about Utility Functions
* add example code about direct operation functions
* When RGBLIGHT_SPLIT is defined, the following function has no meaning and is invalidated.
* rgblight_setrgb_master(r, g, b)
* rgblight_setrgb_slave(r, g, b)
* rgblight_sethsv_master(h, s, v)
* rgblight_sethsv_slave(h, s, v)
* add temporary test code for rgblight_set_effect_range
* fix rgblight_effect_knight() bug
* Test End. Revert "add temporary test code for rgblight_set_effect_range"
This reverts commit 5680cddd012d68b2db75a532862a7fef250f8973.
* Added check for pressed to clear space cadet
* Found some docs to update
* Update docs/quantum_keycodes.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Changes from PR
* translate newbs.md into Madarin Chinese
translate newbs.md into Madarin Chinese
* translate docs into Mandarin Chinese
translate getting_started_github.md into Mandarin Chinese
* translate getting_started_getting_help.md into Mandarin Chinese
translate getting_started_getting_help.md into Mandarin Chinese
* contributing.md to Chinese
Personify QMK as a girl named Q酱 . It can make more developer read this document and contribute QMK.
* getting_started_introduction.md to Chinese
getting_started_introduction.md to Chinese
* faq.md to Chinese
faq.md to Chinese
* crlf2lf getting_started_introduction.md
ending line fix getting_started_introduction.md
* crlf2lf contributing.md
crlf2lf contributing.md
* clean up rgb matrix extern usage
Moved rgb matrix boiler plate into macros
Rebased onto typing heatmap pr
* Fixing the reversed frame buffer access in digital rain
* Fixing digital rain & typing heatmap if keyreactive effects are not enabled
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Adding parenthesizes to DRIVER_LED_TOTAL where necessary
* Updated docs
* added notes about parentheses
* Improve Animation docs with example
- example to reduce flash footprint of animations using RGBLIGHT_EFFECT_ defines
* Re-order the effects list
* Update docs/feature_rgblight.md
Co-Authored-By: yanfali <yanfali@gmail.com>
* Update docs/feature_rgblight.md
Co-Authored-By: yanfali <yanfali@gmail.com>
* Update docs/feature_rgblight.md
Co-Authored-By: yanfali <yanfali@gmail.com>
* Introduce line breaks
* Add title for animation speed section
* Organize Animation Defines Into Groups
* Use the RGB EFFECT recommended by mtei in docs
- has the most modes, and STATIC_LIGHT can't really be disabled.
* Use more accurate titles for effects and animation
- accidentally put a toggle in settings
* Initial conversion of the rgb_led struct
* Converting last keyboard & updating effects to take advantage of the new structure
* New struct should not be const
* Updated docs
* Changing define ___ for no led to NO_LED
* Missed converting some keymap usages of the old struct layout
The code as originally listed didn't work for me, but replacing `unregister_code16(LALT(KC_TAB));` with `unregister_code(KC_LALT);` fixes the problem and causes the macro to work as intended.
Thanks to folks on Discord for helping me figure this out.
* Expose unicode_saved_mods
* Add UNICODEMAP shift pair functionality and XS keycode
* Add XS to keycode reference documentation
* Pick pair index based on both Shift and Caps Lock state
* Add XS to Unicode feature docs
* Clean up process_unicode* headers
* Extract unicode_map index calculation into function
* Pick pair index as XOR rather than OR of Shift and Caps states
* unicode_input_start() has to be called before the unicode_map index is calculated
* Replace unicodemap_input_error() with more generic unicode_input_cancel()
* Replace register+tap+unregister with tap_code16(LCTL(LSFT(KC_U)))
* UNICODE_OSX_KEY → UNICODE_KEY_OSX, UNICODE_WINC_KEY → UNICODE_KEY_WINC
* Make keycode range checks more robust
* Fix keycode range checks for different input modes
* Add UNICODE_KEY_LNX, update docs
* QK_UNICODEMAP_SHIFT → QK_UNICODEMAP_PAIR
* XS → XP, update docs
* Tweak Unicode docs
* Use recently added MOD_MASK_SHIFT and IS_HOST_LED_ON helpers
* Update Unicode table in docs/keycodes.md
* Update Unicode docs per review comments
* Replace references to Mac OS X with macOS in Unicode docs
* As of v0.9.0, WinCompose supports all possible code points
* Expand descriptions in XP docs
* Update keycode table and cycling docs
* Further expand cycling docs
translate
newbs_getting_started.md
newbs_building_firmware.md
newbs_flashing.md
newbs_testing_debugging.md
newbs_best_practices.md
newbs_learn_more_resources.md
into Mandarin Chinese
* If RGBLIGHT_EFFECT_BREATHE_CENTER is undefined, use fixed breathe table instead of exp() and sin()
* Change rgblight breathing table size to be easily selectable.
add RGBLIGHT_BREATHE_TABLE_SIZE macro for customize breathing effect.
* Revamped custom effects approach
See docs for example usage
* push-up RGB Matrix default mode
Override default effect using RGB_MATRIX_STARTUP_MODE.
Useful on boards without EEPROM support
(*cough* Massdrop ALT/CTRL *cough*)
* update docs
* A better new_project.sh
* Fix docstrings
* Use single quotes for anything not shown to user
* Missed this docstring
* Simplify get_git_username()
Thanks @vomindoraan
* chmod +x
* Add docstring for print_error()
* Break up git username call into multiple lines
* Use with statement here
* Conform to PEP 8 even more
* Turn it back into a shell script
* chmod +x again
* Update docs to reflect new keyboard generator usage
* Tweak wording slightly
* Trim trailing whitespace
* Don't actually need to escape the newlines here
* As I suspected, you can pass shift a number
* Prepend ./ to match the other code block
* Minor syntax tweaks
* The username token has changed
* Replace name in the readme too
* Make some reasonable assumptions about the presence of Git
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
* Define RGB colors
Define RGB colors and pass them to the rgblight functions, instead of
defining multiple macros.
* Add new color definitions support for RGB Matrix
* Add/clarify info about new color definitions in Docs
* Add deprecation warning banner to rgblight_list.h
* add I2C_slave_buffer_t to quantum/split_common/transport.c
Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results.
* add temporary pdhelix(Patched Helix) code
* temporary cherry-pick from #5020
add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h
* add post_config.h support to build_keyboard.mk
* add quantum/rgblight_post_config.h, quantum/split_common/post_config.h
Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk.
quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined.
quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C.
* Change split_common's transport.c I2C to use the synchronization feature of rgblight.c
* Change split_common's transport.c serial to use the synchronization feature of rgblight.c
* test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix
* Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix"
This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98.
[x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default
[x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3)
[x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default
[x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default
[x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default
[x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default
[x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default
[x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default
[x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default
* Test End, Revert "temporary cherry-pick from #5020"
This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0.
* Test End, Revert "add temporary pdhelix(Patched Helix) code"
This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660.
* temporarily cherry-pick from #5020 to see if it passes the travis-ci test.
add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h
* Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test."
This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f.
* update docs/config_options.md
* update split_common/transport.c, improves maintainability of serial transaction IDs.
No change in build result.
* temporary cherry-pick from #5020
* fix build fail keebio/iris/rev3:default
* fix build fail lets_split_eh/eh:default
* Revert "temporary cherry-pick from #5020"
This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947.
* temporary cherry-pick from #5020 (0.6.336)
* Revert "temporary cherry-pick from #5020 (0.6.336)"
This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c.
* temporary cherry-pick from #5020 (0.6.336)
* add temporary file that is rgblight.c call graph
* add rgblight_update_hook()
* update rgblight-call-graph.dot (temporary file)
* add more hook point
* add TODO comment
* temporary Revert "add TODO comment"
This reverts commit df6165aac9b3a31d1d3e31ce52aadc134b84eac2.
* temporary Revert "add more hook point"
This reverts commit 64592b06f3bcdaac47c59f922018a273bef76776.
* temporary Revert "add rgblight_update_hook()"
This reverts commit 432b74c912ed4333e6633e20a1bcda10c6a10eaf.
* add rgblight_update_hook()
* add more hook point
* add TODO comment
* implement rgblight_update_hook()
* remove rgblight_update_hook(), add RGBLIGHT_SPLIT_SET_CHANGE_XXXX
rgblight_update_hook() is too large.
change to simple flag setting.
* shrink rgblight_config_t
* implement rgblight_update_sync()
Note: The animation synchronization process has not been implemented yet.
* update quantum/rgblight-call-graph.dot (temporary file)
* rmove quantum/rgblight-call-graph.dot (temporary file)
* update rgblight.c
* Add temporary code to Helix keyboard 'five_rows' keymap to test rgblight.c .
* fix build break rgblight_update_sync() when all animation off
* fix quantum/rgblight.c:rgblight_disable_XX() add RGBLIGHT_SPLIT_SET_CHANGE_MODE
* quantum/rgblight.c change code order: move rgblight_update_sync()
* add mode_base_table[] to quantum/rgblight.c
* quantum/rgblight.c use mode_base_table[] and rgblight_status.base_mode
* quantum/rgblkght.c animation timer integration
* quantum/rgblkght.c add animation sync for split keyboard
* fix mode_base_table[] and snake effect
* fix build break keyboards/mxss.
keyboards/mxss's local rgblight.c need old version rgblight.h
* rgblight.c: fix animation sync
* quantum/rgblight.c: fix snake effect sync
* quantum/rgblight.c: animation sync interverl 30 sec
* quantum/rgblight.c: fix rgblight_effect_rainbow_swirl() and rgblight_effect_knight()
* quantum/rgblight.c: add macro RGBLIGHT_SPLIT_ANIMATION
* cherry-pick from 'rgblight_modes.h sample implementation'
* fix RGBLIGHT_SPLIT_ANIMATION check position
* Update temporary code in Helix keyboard 'five_rows' keymap to test rgblight.c
* Reduce the firmware size by 1500 bytes when rgblight_effect_breathing() is enabled.
* Changed to rgblight_sethsv_eeprom_helper() for easier reading.
* add fail-safe code to quantum/rgblight.c:rgblight_task(),rgblight_timer_enable()
* remove temporary code in Helix keyboard 'five_rows' keymap
* quantum/rgblight.c: add split-keyboard master side sync functions
add functions:
uint8_t rgblight_get_change_flags(void);
void rgblight_clear_change_flags(void);
void rgblight_get_syncinfo(rgblight_syncinfo_t *syncinfo);
change function:
void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom);
* Change rgblight_update_sync() to use write_to_eeprom.
* remove TODO comment from quantum/rgblight.h
* Revert "fix build break keyboards/mxss."
This reverts commit 90b9a1aa7d8af226751500e49e3ea0214cc4e024.
(Separated this change into the newly opened PR #5461.)
* Revert "Reduce the firmware size by 1500 bytes when rgblight_effect_breathing() is enabled."
This reverts commit b61004e63e82cf5334cee4def4ba10cffa88885f.
* update quantum/rgblight.c: Code size reduction when not using RGBLIGHT_SPLIT.
* Add temporary code to Helix keyboard 'five_rows' keymap to test rgblight.c .
* add temporary pdhelix(Patched Helix) code
* Add temporary code to split_common/transport.c to test rgblight.c.
* Finish testing rgblight.c with helix keyboard.
Revert "Add temporary code to Helix keyboard 'five_rows' keymap to test rgblight.c ."
This reverts commit 0bf81a4723a977adc0cb09b4272ee5c9b4f2bbbb.
* Finish testing rgblight.c with quantum/split_common code.
Revert "Add temporary code to split_common/transport.c to test rgblight.c."
This reverts commit 71db3e24eef40d4c455fb9fd1664e4487c9d927a.
* remove temporary pdhelix(Patched Helix) code
This reverts commit 5287e51a394741bcb6028c7cfc0dd0c984645f76.
* Added description of RGBLIGHT_SPLIT macro to docs/feature_rgblight.md.
* add RGBLIGHT_SPLIT_SET_CHANGE_HSVS to rgblight_init()
* Changed to restart animation only when changing mode.
When changing hue, sat and val, the animation is not restarted and continues.
* Port DIRECT_PINS from split_common/matrix.c to matrix.c
* Reorder matrix.c to remove foward declaration and match split_common/matrix.c
* Refactor nano to use DIRECT_PINS
* Reorder matrix.c to remove foward declaration and match split_common/matrix.c
* Add DIRECT_PINS documentation
* Reorder matrix.c to remove foward declaration and match split_common/matrix.c - fix logic from inherited from split_common
* Add DIRECT_PINS documentation - review comments
* Revert "Update build instructions and Dockerfile to download submodules"
This reverts commit 93210547bd.
* Update build tools docs based on feedback
* Fix bad link in build tools docs
* RGB Matrix overhaul
Breakout of animations to separate files
Integration of optimized int based math lib
Overhaul of rgb_matrix.c and animations for performance
* Updating effect function api for future extensions
* Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary
* Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain
* Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes
* fix bug in quantum/rgb_matrix_drivers.c
Co-Authored-By: jackhumbert <jack.humb@gmail.com>
* update command setting to the correct default
* correct rgb config
* remove commented-out lines
* update docs for the 3737
* Update docs/feature_rgb_matrix.md
Co-Authored-By: jackhumbert <jack.humb@gmail.com>
* Add customizable tapping terms
* Add Documentation
* Fix function
* Fixes
* It's not a pointer
* Add debugging output
* Update documentation to be at least vaguely accurate
* Use `get_tapping_term(tapping_key.event)` instead
`e` doesn't include column and row information, properly. It registers as 255, regardless of the actual keypress.
However `tapping_key.event` actually gives the correct column and row information. It appears be the correct structure to use.
In fact, it looks like the issue is that `e` is actually the "TICK" structure, as defined in keyboard.h
* Use variable tapping term value rather than define
* Silly drashna - tapping_key.event, not event
* add get_event_keycode() function
* Fix typo
Co-Authored-By: drashna <drashna@live.com>
* Remove post_process_record_quantum since it's the wrong PR
* Update quantum/quantum.c
Co-Authored-By: drashna <drashna@live.com>
* Better handle ifdef statement for permissive hold
Since we can't be sure that tapping term is actually 500
* Update quantum.c comments based on feedback
* Clean up get_tapping_term function
Clean up function so that users don't need to call the event function, and instead only check the keycode
* Add ability to run functionality on and off
* Make ifdef's more compact
* Implemented Eager Per Row debouncing algorithm.
Good for when fingers can only press one row at a time (e.g. when keyboard is wired so that "rows" are vertical)
* Added documentation for eager_pr
* Ported ergodox_ez to eager_pr debouncing.
* Removed check for changes in matrix_scan.
* Added further clarification in docs.
* Accidental merge with ergodox_ez
* Small cleanup in eager_pr
* Forgot to debounce_init - this would probably cause seg-faults.
* RGB Matrix overhaul
Breakout of animations to separate files
Integration of optimized int based math lib
Overhaul of rgb_matrix.c and animations for performance
* Updating effect function api for future extensions
* Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary
* Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain
* Fixed typo of 'confid.h' to 'config.h'
* Fixed broken links in docs
* Fixed a lot of dead links
* Removed all dead links that I could not find a replacement for
* Placed knops links back in
* Fixed plank keymaps so that they will compile for planck light
* Https doesn't work on knops.io
* tv44:budi now compiles
* s60_x:amnesia0287 now compiles
* Fixed allocation of key_combos so that narze keymap for planck can compile correctly
* Disabled rgb on ergodone and infinity
* Enabled tap dance so it compiles
* Added return statement so it compiles
* If compiling on light disable extra functionality
* Properly redefined variable so it compiles
* Remove remaining dead links
* Add support for wiring RGB LEDs for both halves directly to their respective controllers
RGB LEDs for each half don't need to be chained together across the TRRS cable with this
* Add split RGB LED support for serial
* Update config/rules for bakingpy layout
* Un-nest ifdefs for hand detection
* Read RGB config state from memory instead of EEPROM for serial updates
* Reuse existing LED pointer instead of creating new one
* rgblight.c: add RGBLIGHT_LED_MAP support
* add code to keyboards/helix/rev2/keymaps/five_rows/config.h to test rgblight.c:RGBLIGHT_LED_MAP
* Test end. Revert "add code to keyboards/helix/rev2/keymaps/five_rows/config.h to test rgblight.c:RGBLIGHT_LED_MAP"
This reverts commit e7488d6f7338460b533d7d19a09deccb011000bf.
* update docs/feature_rgblight.md
* led_map[] move to PROGMEM
* Recursively clone qmk_firmware repo
Specifically, so that it grabs the submodules, since ARM keyboards are becoming more common, and we are seeing more issues about chibiOS not being downloaded (in the error log, rather than by question)
* Wrap in shell
* add a tapdance example for creating advanced mod-tap and layer-tap keys
* add optional curly braces to match QMK conventions
* change example to use `register_code16()` and tapdance keycodes more closely matching QMK variants
I'm a web designer and know there are several "decent" code editors out there, but I would figure not everyone into keyboards is, so I found Sublime text a bit of a hard sell for someone who just need to manipulate some text files. VS Code or Atom would b a much better suit for them instead of dropping $80 on a "decent" text editor.
Many instances in the QMK Docs referenced KEYMAP macros, which is outdated terminology.
Replaced most instances of KEYMAP with LAYOUT, to reflect the desired usage.
* Draft commit of typing speed RGB control
* More information in the readme
* Support all RGB animation modes (Fixes#1)
* Added support for all RGB light modes to use typing speed
Except christmas lights because that is seizure-inducing at high speeds!
* Introduced a value range specific to each RGB mode
Because some modes are a little too much when running at full speed!
* Update readme.md
* Update readme.md
* Re-arrange typing_speed definitions (Fixes#5) (#6)
* Re-arrange variable definitions to avoid including quantum.h from rgblight.c
* Fix a compilation error when trying to run make test:all
* Tweaks to the typing speed decay rate
* Renamed to momentum; moved implementation into dedicated files
* Groundwork for toggling momentum on/off (currently always on)
* Add EEPROM toggle for momentum-matching
* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic
* Move momentum decay task out of rgblight_task()
* Fix missing momentum.h in lufa.c
* Experimental LED support (untested)
* Draft commit of typing speed RGB control
* More information in the readme
* Support all RGB animation modes (Fixes#1)
* Added support for all RGB light modes to use typing speed
Except christmas lights because that is seizure-inducing at high speeds!
* Introduced a value range specific to each RGB mode
Because some modes are a little too much when running at full speed!
* Update readme.md
* Update readme.md
* Re-arrange typing_speed definitions (Fixes#5) (#6)
* Re-arrange variable definitions to avoid including quantum.h from rgblight.c
* Fix a compilation error when trying to run make test:all
* Tweaks to the typing speed decay rate
* Renamed to momentum; moved implementation into dedicated files
* Groundwork for toggling momentum on/off (currently always on)
* Add EEPROM toggle for momentum-matching
* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic
* Move momentum decay task out of rgblight_task()
* Fix missing momentum.h in lufa.c
* Added documentation
* Renamed feature to velocikey
* Reverted readme to original state
* Correct the readme title
* Updated feature name in the docs
* Update EECONFIG name
* Add compile-time toggles for velocikey
* Update feature documentation
* Revert "Merge branch 'led-support' into master"
This reverts commit e123ff5febf61639b9a9020748e1c2e2313460ff, reversing
changes made to df111a55b9d4929182e16108b1c0ead15b16df97.
* Move velocikey EECONFIG definition to depend on VELOCIKEY_ENABLE
* Rename decay_task function to decelerate
* Apply suggestions from code review
Co-Authored-By: chrislewisdev <chris@chrislewisdev.com>
* Re-order eeconfig definitions
* Apply coding conventions
* Apply #ifdef check in lufa.c
* Refactored interval time checks into one functionc
* Small rename
* Fix unused function error for layouts not using all rgb effects
* Only update EEPROM if Velocikey is enabled
* Incorporate code review feedback
* Small adjustment to top-end decay rate
* Add Velocikey documentation to table of contents
* Bring tetris:default keymap size down by disabling audio
Descriptions for B5_AUDIO, B6_AUDIO, and B7_AUDIO under Hardware Options were partially italicized when parsed by Docsify, though rendered as intended by GitHub.
* Change Command keycode defaults to match corresponding Bootmagic codes
* Make alternate magic key keycodes consistent
* Reflect changes from previous commit in tmk_core/common/command.c
* Remove unnecessary MAGIC_KEY_* definitions from keymaps compatible with these changes
* Swap E and BSPACE for MAGIC_KEY_EEPROM
* Add MAGIC_KEY_EEPROM_CLEAR instead of MAGIC_KEY_EEPROM_ALT
* Remove BOOTMAGIC_ENABLE checks around EECONFIG stuff
* Update Command descriptions
* initial work to add eeprom to haptic feedback and decouple the feedback process from keyboards
* Haptic feedback enhancements: on/off toggle working, feedback order working
todo:
-work on modes switching
-get modes switching to save to eeprom
* haptic enhancement - eeprom and modes added
* Added set and get functions for haptic feedback
* initial implementation of solenoids under haptic feedback
* changed eeprom to 32 bits to reserve blocks for future features
* start documentation of haptic feedback
* change keycode per comment from reviewers
* typo fixes
* added eeprom for solenoid configs
* added solenoid and docs
* Add/fix default parameters configs, improve docs
* more doc cleanup
* add in solenoid buzz toggle, clean up doc
* some fixes for error in compiling solenoid
* fix a chibios specific i2c read function and added one for AVR controllers in DRV2605L.c
* fixes for avr side issues
* update keymap
* fix keymap compile error
* fix bugs found during solenoid testing
* set pin that is not powered during bootloader
* added warning about certain pins on the MCU may trip solenoid during DFU/bootloader
Based on conversation with Drashna on Discord, we know that if ONE_SHOT_TAP_TOGGLE is 5, then tapping a one shot mod key 5 times holds the one shot key permanently, but to come out of this, you need to press the same key only once.
* Add support for using ranges for RGB
This patch adds support for controlling continuous ranges of RGB LEDs.
Helper functions for split boards are also available.
* RGB Range: Use hardware-platform agnostic wait
* Update KC_GESC documentation
- document caveats on OSX and expected behavior with KC_GESC and GUI
- clarify documentation slightly
- give examples of expected output in actual use
* Update OSX -> macOS
* Captilization
* remove simply
* Added xeal60 via clone of lets split
* Delete removed other keymaps
* Basic keymap (no FN). Compiles.
* Removed NP_STAR and NP_SLSH.
* Removed "debounce_algo = manual" in all keyboards with CUSTOM_MATRIX = yes.
* Changed order of rules in TMK. Documented feature.
* Fixed missing whitespace in debounce documentation
Table wasn't working due to missing newline.
* Added bold in a few areas.
* DO NOT USE - Removed debounce from TMK.
* Remove accidental xeal60 commit
* DO NOT USE - debounce successfully compiled.
* DO NOT USE Revert back to original API to support split_keyboards.
* Working eager_pk
* Whitespace cleanup.
* Restored debounce.h since there wasnt any real change.
* Moved debouncing_time variable to inside #if debounce
* Removed check for custom_matrix. We can safely include the debounce file for compilation when custom_matrix is used.
* Removed #include "matrix.h" from debounce.h
* Bug fix - was using MATRIX_ROWS instead of num_rows
* Fixed compilation error with debounce_sym_g
* Renamed DEBOUNCE_ALGO to DEBOUNCE_TYPE
* Malloc array in debounce_eager_pk, since split keyboards only use MATRIX_ROWS/2.
* Fix compile error in debounce_eager_pk
* Stricter, leaner DEBOUNCE_TYPE section in common_features.mk. Cleanup debounce_type.mk
* Add suspend functions
* Disable RGB code if it's disabled
* Add keyboard_init functions
* Change where references so it will compile
* Wrong command chained in wake up kb function
* Fix non-feature file changes
* Add documentation
* Re-add matrix init docs
* add rgblight code to example
* Remove suspend code
* Clean up docs
* Fix docs
* Fix suspend code
* more doc fixes
* change function to startup_* rather than keyboard_init_
* fix spelling error
* fix up docs to finish removing keyboard_init
* Use Pre and Post init functions
* Update Documenation
* Remove changes to my keymap and userspace code
* Cleanup
* Revert changes to extra files
* Forgot a semicolon
* Make sure all protocols call keyboard_setup
* Cleanup functions
* Unset startup_user
* Remove changes from division keyboard
* Readd startup_user function
* Remove all to startup_user
* Update docs/custom_quantum_functions.md
Co-Authored-By: drashna <drashna@live.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: drashna <drashna@live.com>
* Add suggestion line
* Rebase fixes
* Update documentation to be more useful/accurate
* Cleanup of documentation
* Fix spacing inconsistency
* Revert unexpected change to keymap
* Add a mechanism for force building a particular community layout
* Add docs for FORCE_LAYOUT argument
* Update output name when FORCE_LAYOUT is enabled
* Improvement of Space Cadet Shift by preventing to automatically apply a modifier on the key and allow to override the default modifier. Closesqmk/qmk_firmware#3815
* Improve the use of the DISABLE_SPACE_CADET_MODIFIER flag to avoid unregistering KC_LSFT when equals to LSPO_MOD
* change #if to if statement
* Added callbacks to one shot modifier changes
* Altered signature of callback functions
* Reordered the callback methods, shortened brief documentation
* Added One Shot Modifier callback documentation
* First attempt at unit tests
* Revert "First attempt at unit tests"
This reverts commit 5ec21a782202c0d74cf21cb852bd319f0c8b4842.
* Simplified oneshot function implementations
* Made clear_oneshot_locked_mods to be conform action_util.h, adhering to the (void) signature
* Made used datatypes for oneshot mods consistently unsigned integers
* Corrected callback to call clear callback when clear_oneshot_locked_mods is invoked
* Simplified oneshot equals statements
* Corrected return type and signature of get and set oneshot locked mods
* Consolidated one shot callbacks, added initial layer callback version
* Fixed non-updating one shot layer variable after timeout or other clear, added code comments
* Added better one shot key docs
* [BACKLIGHT_CAPS_LOCK_INDICATOR] Use backlight toggling as Caps Lock LED
I've implemented this feature because S65-X doesn't have LED indicators
and the existing led_set_kb(usb_led) function try to use backlight as
indicator but that creates an inconsistency with backlight_config state.
- define `BACKLIGHT_CAPS_LOCK_INDICATOR` to enable Caps Lock indicator
using backlight (for keyboards without dedicated LED)
- Don't turn off LED indicators when suspend because backlight is
already turned off. Else led_set(0) will turn back on backlight.
- Documentation has been updated
* [BACKLIGHT_CAPS_LOCK_INDICATOR] Turn off all LED indicators except Caps Lock if BACKLIGHT_CAPS_LOCK_INDICATOR
* [BACKLIGHT_CAPS_LOCK] Rename BACKLIGHT_CAPS_LOCK_INDICATOR
* [BACKLIGHT_CAPS_LOCK] Use new IS_LED_ON method
* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4
* Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions
* Update docs to use get_mods() instead of keyboard_report->mods
* Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test
For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist
* Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)
* Adding documentation for the LM layer modifier.
This will hopefully clear up some of the confusion around adding this layer modifier. I struggled with this a bit as well at first.
* Removing duplicate table.
* Changed section title to `Changing Layers`
* Retain name
* Grammatical fixes for GPIO Control doc
I found the Advanced Settings section to be poorly written.
* Commit suggestions from fauxpark
* Change first instance of "microcontroller" to match suggestion
* Defined IS_(HOST_)LED_ON/OFF() and improved LED documentation
* Update docs/custom_quantum_functions.md
Co-Authored-By: DidierLoiseau <didierloiseau+github@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: DidierLoiseau <didierloiseau+github@gmail.com>
* Integrated @drashna and @fauxpark's PR comments
- changed all plurals of "LED" to "LEDs" in the file
- rewording of the note about host_keyboard_leds() vs. led_set_user()
* Update docs/custom_quantum_functions.md
Co-Authored-By: DidierLoiseau <didierloiseau+github@gmail.com>
* Eliminate separate slave loop
Both master and slave run the standard keyboard_task main loop now.
* Refactor i2c/serial specific code
Simplify some of the preprocessor mess by using common function names.
* Fix missing #endif
* Move direct pin mapping support from miniaxe to split_common
For boards with more pins than sense--sorry, switches.
* Reordering and reformatting only
* Don't run matrix_scan_quantum on slave side
* Clean up the offset/slaveOffset calculations
* Cut undebounced matrix size in half
* Refactor debouncing
* Minor fixups
* Split split_common transport and debounce code into their own files
Can now be replaced with custom versions per keyboard using
CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes
* Refactor debounce for non-split keyboards too
* Update handwired/xealous to build using new split_common
* Fix debounce breaking basic test
* Dodgy method to allow a split kb to only include one of i2c/serial
SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only
that driver code in the binary.
SPLIT_TRANSPORT = custom (or anything else) will include neither, the
keyboard must supply it's own code
if SPLIT_TRANSPORT is not defined then the original behaviour (include
both avr i2c and serial code) is maintained.
This could be better but it would require explicitly updating all the
existing split keyboards.
* Enable LTO to get lets_split/sockets under the line
* Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE
* Remove avr-specific sei() from split matrix_setup
Not needed now that slave doesn't have a separate main loop.
Both sides (on avr) call sei() in lufa's main() after exiting
keyboard_setup().
* Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT.
* Add comments and fix formatting.
* adds proton c base
* fixes custom matrix include
* adds readme.md
* initial proton coversion, no pin mapping
* start of mcu selection
* add pin mapping and sweet16 test
* add at90 to list
* disable backlight, fix d7
* update flag names
* doc updates
* proton c update for mcu selection
* Remove unused UNICODE(n) macro, update docs
* Add note about max length of unicode_map to docs
* QK_UNICODE_MAP → QK_UNICODEMAP
* Refactor process_unicode_map
* process_unicode_map → process_unicodemap
This is done for consistency: UNICODEMAP is the method (hence UNICODEMAP_ENABLE, process_unicodemap), whereas unicode_map is the mapping table itself.
* Update references and ordering in docs/understanding_qmk
* Add additional note to docs/understanding_qmk
* &unicode_map[index] → unicode_map + index
This avoids the issue of the compiler sometimes complaining about the array index being out of range
* Update docs/getting_started_make_guide
* Update method sections in docs/feature_unicode
* Update feature_advanced_keycodes.md
Probably a better way to word it, but I've solved this issue on reddit several times, had to solve this for friends, ect. It's something worth being in the docs as it's a common issue, and not always intuitive. I have offered this change as I was told by several people "It was never mentioned in the docs".
* Update feature_advanced_keycodes.md
Clear up what was meant to be said.
* Fix up process_leader to be a bit more optimized
* Process dual function keys better
* Make leader start a callable function
* Fix per key timer call location
* Add escape if already leading
* Return false for KC_LEAD
* Add documentation
* Standardize the Unicode EEPROM code
* Remove unicode init from process_record_* functions
* Add unicode init to where it belongs: matrix_init_quantum
* Move Unicode proccessing to unicode common
* Add audio feedback to input mode keys to drive konstantin up a wall
* Tap_code cleanup
* Update keycodes
* Update unicode documentation
* Update unicode keycodes for consistency/easier merge
* Add Audio Feedback section
* Remove Functions from feature page
And link to the file instead. Link to specific lines later on.
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* Because I missed it!
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* SPAAAAAAAAAACing
Co-Authored-By: drashna <drashna@live.com>
* Add BSD for future compatibility
* Thought I fixed that!
Co-Authored-By: drashna <drashna@live.com>
* non-breaking
Co-Authored-By: drashna <drashna@live.com>
* Considered that
Co-Authored-By: drashna <drashna@live.com>
* Yuuup
Co-Authored-By: drashna <drashna@live.com>
* consistency
Co-Authored-By: drashna <drashna@live.com>
* white spaces .... copied from elsewhere
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Update keycode defines
* Fix Linux Song
* Update all of the songs
* Cleanup
* Move and update check to ensure only one unicode method is enabled
* Update quantum/quantum_keycodes.h
* Update documentation
* Wordsmithing and cleanup
* Format unicode_common (#13)
* case alignment
* process_record_unicode_common → process_unicode_common
* Move song arrays into function where they're used, align preprocessor directives
* Swap the order of UC_WIN and UC_BSD
* Update Unicode docs
* Reorder Unicode mode stuff to match the order of input mode constants
* Fix capitalization in doc subtitle
* Readd BSD and OSX_RALT songs
* Reword BSD note in docs
* Readd BSD keycode description
* Reword explanation of input on different platforms
* Steal vomindoraan's input mode documentation
Co-Authored-By: vomindoraan (vomindoraan@gmail.com)
* Willingly give Drashna the rest of my Unicode doc improvements
* Wordsmithing
Co-Authored-By: drashna <drashna@live.com>
* remove merge artifacts
* Unicode common cleanup (#17)
* Standardize the Unicode EEPROM code
* Remove unicode init from process_record_* functions
* Add unicode init to where it belongs: matrix_init_quantum
* Move Unicode proccessing to unicode common
* Add audio feedback to input mode keys to drive konstantin up a wall
* Tap_code cleanup
* Update keycodes
* Update unicode documentation
* Update unicode keycodes for consistency/easier merge
* Add Audio Feedback section
* Remove Functions from feature page
And link to the file instead. Link to specific lines later on.
* Fix white spaces
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* Because I missed it!
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* SPAAAAAAAAAACing
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Add BSD for future compatibility
* Thought I fixed that!
Co-Authored-By: drashna <drashna@live.com>
* non-breaking
Co-Authored-By: drashna <drashna@live.com>
* Considered that
Co-Authored-By: drashna <drashna@live.com>
* Yuuup
Co-Authored-By: drashna <drashna@live.com>
* consistency
Co-Authored-By: drashna <drashna@live.com>
* white spaces .... copied from elsewhere
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Update keycode defines
* Fix Linux Song
* Update all of the songs
* Cleanup
* Move and update check to ensure only one unicode method is enabled
* Update quantum/quantum_keycodes.h
* Update documentation
* Wordsmithing and cleanup
* Format unicode_common (#13)
* case alignment
* process_record_unicode_common → process_unicode_common
* Move song arrays into function where they're used, align preprocessor directives
* Swap the order of UC_WIN and UC_BSD
* Update Unicode docs
* Reorder Unicode mode stuff to match the order of input mode constants
* Fix capitalization in doc subtitle
* Readd BSD and OSX_RALT songs
* Reword BSD note in docs
* Readd BSD keycode description
* Reword explanation of input on different platforms
* Steal vomindoraan's input mode documentation
Co-Authored-By: vomindoraan (vomindoraan@gmail.com)
* Willingly give Drashna the rest of my Unicode doc improvements
* Wordsmithing
Co-Authored-By: drashna <drashna@live.com>
* Rearrange process_unicode_common functions
* Make Unicode input mode constants (UC_*) an enum
* Simplify unicode_input_start/finish code
* Make the key used for WinCompose configurable
* Remove UC_OSX_RALT in favor of setting the key with UNICODE_OSX_KEY
* Update Unicode input mode doc
* Add descriptions and rearrange definitions in process_unicode_common.h
* Add registry command to Unicode docs + misc updates
* Reword an explanation in Unicode docs
* Add TODO comment
* Remove trailing whitespace
* Improve Cycling documentation
* Add Unicode Input method Cycling support (#19)
* Standardize the Unicode EEPROM code
* Remove unicode init from process_record_* functions
* Add unicode init to where it belongs: matrix_init_quantum
* Move Unicode proccessing to unicode common
* Add audio feedback to input mode keys to drive konstantin up a wall
* Tap_code cleanup
* Update keycodes
* Update unicode documentation
* Update unicode keycodes for consistency/easier merge
* Add Audio Feedback section
* Remove Functions from feature page
And link to the file instead. Link to specific lines later on.
* Fix white spaces
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* Because I missed it!
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* SPAAAAAAAAAACing
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Add BSD for future compatibility
* Thought I fixed that!
Co-Authored-By: drashna <drashna@live.com>
* non-breaking
Co-Authored-By: drashna <drashna@live.com>
* Considered that
Co-Authored-By: drashna <drashna@live.com>
* Yuuup
Co-Authored-By: drashna <drashna@live.com>
* consistency
Co-Authored-By: drashna <drashna@live.com>
* white spaces .... copied from elsewhere
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Update keycode defines
* Fix Linux Song
* Update all of the songs
* Cleanup
* Move and update check to ensure only one unicode method is enabled
* Update quantum/quantum_keycodes.h
* Update documentation
* Wordsmithing and cleanup
* Format unicode_common (#13)
* case alignment
* process_record_unicode_common → process_unicode_common
* Move song arrays into function where they're used, align preprocessor directives
* Swap the order of UC_WIN and UC_BSD
* Update Unicode docs
* Reorder Unicode mode stuff to match the order of input mode constants
* Fix capitalization in doc subtitle
* Readd BSD and OSX_RALT songs
* Reword BSD note in docs
* Readd BSD keycode description
* Reword explanation of input on different platforms
* Steal vomindoraan's input mode documentation
Co-Authored-By: vomindoraan (vomindoraan@gmail.com)
* Willingly give Drashna the rest of my Unicode doc improvements
* Wordsmithing
Co-Authored-By: drashna <drashna@live.com>
* Rearrange process_unicode_common functions
* Make Unicode input mode constants (UC_*) an enum
* Simplify unicode_input_start/finish code
* Make the key used for WinCompose configurable
* Remove UC_OSX_RALT in favor of setting the key with UNICODE_OSX_KEY
* Update Unicode input mode doc
* Add descriptions and rearrange definitions in process_unicode_common.h
* Add registry command to Unicode docs + misc updates
* Reword an explanation in Unicode docs
* Add TODO comment
* Add cycle_unicode_input_mode and UNICODE_SELECTED_MODES macro
* Add an option for making cycle changes persistent
* Add debug prints to functions that change input_mode
* Use cycle_unicode_input_mode in whitefox/konstantin
* Add persist_unicode_input_mode function
* Add offset to cycle to allow stepping in reverse
* Add keycodes: UNICODE_MODE_FORWARD, UNICODE_MODE_REVERSE
Aliases: UC_MOD, UC_RMOD (respectively)
* REVERT ME: Undo changes to whitefox/konstantin to avoid conflicts
* Fix wrong constant name
* Revert "REVERT ME: Undo changes to whitefox/konstantin to avoid conflicts"
This reverts commit 42676bf251fc8e3823f5e614dad6e510ba47a2f3.
* Change dprintf text
* Give selected modes priority over EEPROM when !UNICODE_CYCLE_PERSIST
* Remove trailing whitespace
* Cleanup of RALT code and unicode compilation stuff
* Remove else for unicode handling
* Add delay in Tap Code to avoid issues
I think a few people have reporting issues with it working properly, and it may be a timing issue. The 'register_code' uses this sort of delay in some of the functions, and
this is probably why.
Adding the 100ms delay should hopefully fix any issues with it.
* Make tap_code delay configurable
* Update documentation
* Bring tap_code16 inline with changes
* Fix type for tap_code16
Bad copy-paste job
* Just use the value check for the define
* Clarify timing in docs
Co-Authored-By: drashna <drashna@live.com>
* Wordsmithing
Co-Authored-By: drashna <drashna@live.com>
* Add standard ALGR defition, remove (re)definitions from language files
* Use ALGR(kc) consistently in ALTGR(kc) aliases
* Non-Nordic keymaps should not use NO_ALGR
* Add standard KC_ALGR definition
* Update docs with ALGR and KC_ALGR
* Update SS_ALGR and ALGR_T aliases
* Add a Docker build script
* Add usage and error messages
* Add -r to reads
Thanks mechmerlin
* Add keyboard:keymap form, improve script
* Add target argument, change usage forms in script
* Add check for more than 3 args in keyboard:keymap:target form
* Change Docker base image to debian, use community repo
This matches what qmk_compiler uses (https://github.com/qmk/qmk_compiler/blob/master/Dockerfile#L1).
I've removed the maintainer as we now have a community build on Docker Hub (https://hub.docker.com/r/qmkfm/qmk_firmware). This Dockerfile will also be maintained by the community.
* Change build command format to keyboard:keymap
* Call make directly in container run command
* Simplify script, remove 3-arg form
* Add COPY to Dockerfile so images are usable in and of themselves
Also change WORKDIR from /qmk to /qmk_firmware
* Add USB pass-through for Linux and docker-machine hosts
* Read directly into variables instead of array
* Alphabetically sort dependencies in Dockerfile
* Set executable bit on util/docker_build.sh
* Update Docker docs
* Add warning about Docker on Windows
* Expand comment in docs
* Check docker-machine exit code instead of string
* Only match --help with whole arguments
* Make script POSIX-compliant
* Convert script indentation to tabs
Specifically, moved the shifted keycodes to the top of the 'Feature' list, so it's more visible. This way, all of the keycodes are at the top of the list, rather than having the shifted keys at the bottom, so they should be easier to find since they're all in one place.
* add zh-cn readme
* edit readme
* Round 1 of edits
- Mandarin translation of QMK products is off, best to use the English name.
- Fix some terminology and grammar.
* trying re-translating the first paragraph
* add fallback langurages
* Create LANGS.md
* Rename docs/zh-cn/README.md to docs/zh/README.md
* Update LANGS.md
* Update index.html
* Delete README.md
* add sidebar for zh
* add zh-cn readme
* edit readme
* Round 1 of edits
- Mandarin translation of QMK products is off, best to use the English name.
- Fix some terminology and grammar.
* trying re-translating the first paragraph
* add fallback langurages
* Create LANGS.md
* Rename docs/zh-cn/README.md to docs/zh/README.md
* Update LANGS.md
* Update index.html
* add zh-cn readme
* edit readme
* Round 1 of edits
- Mandarin translation of QMK products is off, best to use the English name.
- Fix some terminology and grammar.
* trying re-translating the first paragraph
* Allows disabling animations in user space
* Describe disabling effects in the docs
* Allows disabling individual reactive modes
* Adds the list ode defines
* Unify multiple HID interfaces into one
This reduces the number of USB endpoints required, which frees them up
for other things.
NKRO and EXTRAKEY always use the shared endpoint.
By default, MOUSEKEY also uses it. This means it won't work as a Boot
Procotol mouse in some BIOSes, etc. If you really think your
keyboard needs to work as a mouse in your BIOS, set
MOUSE_SHARED_EP = no in your rules.mk.
By default, the core keyboard does not use the shared endpoint, as not
all BIOSes are standards compliant and that's one place you don't want
to find out your keyboard doesn't work.. If you are really confident,
you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here
too.
* unify endpoints: ChibiOS protocol implementation
* fixup: missing #ifdef EXTRAKEY_ENABLEs
broke build on AVR with EXTRAKEY disabled
* endpoints: restore error when too many endpoints required
* lufa: wait up to 10ms to send keyboard input
This avoids packets being dropped when two reports are sent in quick
succession (eg. releasing a dual role key).
* endpoints: fix compile on ARM_ATSAM
* endpoint: ARM_ATSAM fixes
No longer use wrong or unexpected endpoint IDs
* endpoints: accommodate VUSB protocol
V-USB has its own, understandably simple ideas about the report formats.
It already blasts the mouse and extrakeys through one endpoint with
report IDs. We just stay out of its way.
* endpoints: document new endpoint configuration options
* endpoints: respect keyboard_report->mods in NKRO
The caller(s) of host_keyboard_send expect to be able to just drop
modifiers in the mods field and not worry about whether NKRO is in use.
This is a good thing. So we just shift it over if needs be.
* endpoints: report.c: update for new keyboard_report format
* Docs: Configurator Support
* Minor updates
* Updated keyboard.h example to use #pragma once
per @drashna
https://github.com/qmk/qmk_firmware/pull/4396#discussion_r232140934
* Add link to doc under Reference section
Added to _sidebar.md and _summary.md
* Changed doc title; minor tweaks
Re-titled the doc as "Supporting Your Keyboard in QMK Configurator".
Made some minor changes to the keyboard.h examples.
* Added tags object to JSON example
* add functions to set specific backlight state
* add function to query backlight state
* update documentation with new backlight functions
* Update tmk_core/common/backlight.c
Co-Authored-By: codyd51 <phillip.ennen@gmail.com>
* Update tmk_core/common/backlight.h
Co-Authored-By: codyd51 <phillip.ennen@gmail.com>
* update docs for is_backlight_enabled() name change
* I2C driver docs
- Added I2C driver docs.
- Changed arm master i2c driver to have a weak i2c_init as it is impossible to account for all possible port configuration in the STM32 world.
* Update docs/i2c_driver.md
Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>
* Update docs/i2c_driver.md
Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>
* Update docs/i2c_driver.md
Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>
* Update docs/i2c_driver.md
Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>
* GPIO release fix
* Configurable Rainbow Swirl range
This allows tweaking of the rainbow effect to
get different effects on keyboards with varied
LED layouts. We found the value 1950 works on
the RGBKB.net Sol to get a cool striped effect
across the keyboard.
* Document RGBLIGHT_RAINBOW_SWIRL_RANGE
* Better wording for the documentation
* add computed pins from mcu type
* update for atmega32a
* doc typo
* add atmega16 chips, link to references
* remove avr include from config
* exclude assembler in config.h includes
* consolodate options, add 646
* fix typo in pindef
* Preliminary additon of bootmagic lite functionality
* Cleanup code
* Clean up bootmagic code
* Add documentation and clean up code
* Make 'lite' an option for BOOTMAGIC_ENABLE
* Update Templates with note about Bootmagic Lite option
* Detect Debounce variable
* Make sure debounce is a non-zero number
* Capitalize Bootmagic
* Capitalize bootmagic
* Update wording
* Re-add EEPROM reset, by popular demand
And add eeprom-less version to drashna userspace for his sanity
* Fix spacing
* Set BOOTMAGIC_ENABLE to use full/lite/off
And default yes to "full" for compatibility
* Add Bootmagic lite info to templates
* Remove text from makefiles
* Cleanup of makefile
* mention yes in bootmagic docs
* Wordsmitthing the docs
* Fix white spaces
* Readd default bootmagic setting, because it's necessary
* Add caveats for shifted characters
And some formatting and grammar corrections.
Closes#1037
* Fix spelling of remote
* Fix spelling error
* Remote not Remove
* Remote not Remove
* Docs: newbs_learn_more_resources.md: formatting
* Added QMK Git Conventions doc, initial version
* Renamed contributing_qmk.md to newbs_best_practices.md
* Updated per review by @drashna
* Added navigation links
* Updated to Best Practices doc
* Minor updates to Learn More Resources doc
Markdown formatting consistency because I'm particular about it.
* Added Merge Conflict section to Best Practices doc
* syncing upstream
* Bluetooth Doc update
More Description in bluetooth section, Addition to Config options rules.mk section.
* merge upstream
chibios
* lib/chibios checkout
* Additional EZ key Section
added back EZ-Key diy link, Cleaned up some errors
* Update and clarify Unicode documentation
* Fixed UCIS info based on feedback from algernon
* Further clarifications and cleanup
* Formatting
* Add an example for unicode map
* fix AutoHotKey title
* Add send_string_unicode function
Co-authored-by: kdb424 <kdb424@gmail.com>
Co-authored-by: Konstantin <vomindoraan@gmail.com>
* Clean up code based on feedback
* Fix includes
* Add Function level EEPROM configuration
Add kb and user functions for EEPROM, and example of how to use it.
* Bug fixes and demo
* Additional cleanup
* Add EEPROM reset macro to example
* Forgot init function in list
* Move eeconfig_init_quantum function to quantum.c and actually set default layer
* See if removing weak quantum function fixes issue
* Fix travis compile error
* Remove ifdef blocks from EECONFIG so settings are always set
* Fix for ARM EEPROM updates
* Fix merge issues
* Fix potential STM32 EEPROM issues
* Update quantum matrix to support both AVR and Chibios ARM
- Addition of STM32 pin definitions
- Created abstruction layer defines to control GPIO (This is a bit pointless for Chibios as we are creating a PAL ontop of a PAL but it is necessary for uniformity with AVR)
- Modified matrix.c to use the above functions
* minor ifdef fix
* Rename of functions and docs
- Added documentation.
- Renamed functions according to Jack's spec.
* Massdrop fix
* Update matrix.c
* Update quantum.h
* Update quantum.h
* Update quantum.h
* Update internals_gpio_control.md
* Add pragma once info to contributing guidelines
* Fix links in readme template to match doc site
* Revert changes to contributing doc as somebody already changed it
* add 'mavrdude' target into tmk_core/avr.mk
I made it a little convenient when writing the same binary to multiple Pro Micro.
* rename target name 'mavrdude' to 'avrdude-loop'
* modify docs/flashing.md about avrdude-loop
* mdify docs/flashing.md again
* modifi docs/flashing.md 3rd
Added a sample circuitry for handling the connection of a PS/2 Mouse.
Even if it's written that a circuitry is needed, there're a lot of other
things and the information gets lost really fast. A really simple sample
helps to remember who wants to implement the functionality about the
circuitry.
* Remove chording as it is not documented, not used, and needs work.
* Make Leader Key an optional feature.
* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`
* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
* initial commit of keymap creation script
* create default keymap
* pass shellcheck
* provide a better usage message
* change printf string to more accurately reflect the path
* make it more easily understood
* found another typo
* add documentation regarding the new_keymap script
* enforce lowercase for userinputs
* add temporary test code rgblight-macro-test1.[ch]
* rgblight.h : mode auto numberring and auto generate mode name symbol
No change in build result.
* rgblight.c use RGBLIGHT_MODE_xxx symbols
No change in build result.
* quantum.c use RGBLIGHT_MODE_xxx symbols
No change in build result.
* fix build break. when RGB_MATRIX_ENABLE defined
* add temporary test code rgblight-macro-test2.[ch]
* modify rgblight_mode_eeprom_helper() and rgblight_sethsv_eeprom_helper()
* modify rgblight_task()
* configurable each effect compile on/off in config.h
* update docs/feature_rgblight.md
* fix conflict. docs/feature_rgblight.md
* remove temporary test code rgblight-macro-test*.[ch]
* fix comment typo.
* remove old mode number from comment
* update docs/feature_rgblight.md about effect mode
* Revert "update docs/feature_rgblight.md about effect mode"
This reverts commit 43890663fcc9dda1899df7a37d382fc38b1a6d6d.
* some change docs/feature_rgblight.md
* fix typo
* docs/feature_rgblight.md update: revise mode number table
- Added support for NO_USB_STARTUP_CHECK. This allows the keyboard do function and not get stuck in a SUSPENDED state loop in case of no USB connection.
- Added support for WAIT_FOR_USB. In LUFA no keyboard has this flag enable therefor no keyboard waits for usb to be active.
- Added documentation for both configuration flags as they were missing.
* add process_terminal() and update links to other functions
* convert links to permalinks and add a few missing process_* functions
* update links in main text as well
When moving my planck layout to my let's split, I ran into this issue
because I had copied my planck layout from the default layout which just
used the `{}` array form for the keymap layers. I checked the docs, but
this bit wasn't clear to me. I'm sure @ishtob or @drashna helped me on
discord, but this seemed to be the logical place to add a helpful hint.
* ISSI31FL3733 driver
- Addapted IS31 driver for the above driver
* fix my branch
* ISSI31FL3733 driver
- Inclusion of above ISSI led driver
* IS31fl3733 driver
- Added correct function for control registers
* Finalized support for ISSI31fl3733 led driver
- Finalized and tested driver.
- Modified i2c_master for arm due to declaration mistake.
- Fixed spaces/tabs in quantum.h file.
- Fixed spaces/tabs in common_features.mk file.
- Removed unnecessary includes from rgb_matrix.c file.
- Added local definitions for MIN and MAX macros in rgb_matrix.c file.
- Adjusted chevron effect.
- Added necessary define (RGB_3733_MATRIX_ENABLE) for makefile.
- Added necessary C define (ISSI3733) to aid with inclusion of the correct header file.
- Added documentation for the new driver.
* Driver structure update
- Changed rule includes to be more condensed (RGB_MATRIX_ENABLE = IS31FL3731) and (RGB_MATRIX_ENABLE = IS31FL3733)
- Updated documentation
- Reverted to the use of differently named functions for each driver and selecting the needed ones within rgb_matrix.c
* ISSI Drivers refractoring
- Moved issi drivers in a dedicated folder
- Updated documentation
* I2C library fix
I released the special pins incorrectly before. It is now fixed.
* Fix some minor errors in tap dance example
Fix for #3529
Fix minor errors in the code examples for __Example 4: 'Quad Function Tap-Dance'__ and relevant documentation.
Clarified the need to include the header file in `keymap.c`.
* Use #pragma once in header guard
Fix for #3529
Implement change requested in #3530
* Make Bootmagic and Command docs a little easier to read
* Sometimes Bootmagic/Command is default on
* "Escape" pipe character so it renders correctly
* Fix the SLC_CLOCK setting for the Split Common code
Make the SCL_CLOCK setting configurable per board, since some use different settings
And change the Iris to use 100000L instead of 400000L
* Add SCL_CLOCK variable to documentation
* Change SCL_CLOCK default to 100000L
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
* Adds Audio Keycodes to both the feature page and master list
* Re-orders the keycode list, so it's alphabetical (mostly)
* Add additional (missing) sections to the keycode list
* Add and update links in the keycode page
* Add and reorder links in sidebar's keycode section
* integrated Peter Fleury's LCD library for HD44780 LCDs
* fixed typo
* cleanup finished
* add documentation
* added HD44780 documentation
* removed keyboard from .gitmodules
* resolved merge conflict
* removed edit of kira75s rules.mk made by merge
* moved hd44780 to drivers/avr
* Added licence info to hd44780 files
* Added link to hd44780 docs.
@drashna mentioned it'd be good to have a mention of the userspace in
the QMK structure section. Rather than rewrite the docs on userspace, I
chose to link to the existing documentation.
If you run `brew install avr-gcc`, you get a version that has
compatibility issues with LUFA. I updated the getting started guide for
osx, the qmk_install setup script, and added a section to the FAQ for
folks like me who accidentally updated avr-gcc past 7.
* Addition of hard brigtness limit for RGB_Matrix
- Added a define "RGB_MATRIX_MAXIMUM_BRIGHTNESS" to enable hard limiting the maximum brightness for rgb_matrix
- Used the above define to limit the maximum brigthness of HS60 for better stability
* Added docs for new rgb_matrix define
* Addition of check for maximum brightness
* Clean up SEND_STRING keycodes and add media keys
* Remove stray define
* Add missing SEND_STRING keycodes for completeness
Also, add KC_EJCT to the keycode references
* Add suspend functions
* Disable RGB code if it's disabled
* Add suspend code to ChibiOS for future compatibility
* Add keyboard_init functions
* Change where references so it will compile
* Wrong command chained in wake up kb function
* Fix non-feature file changes
* Add documentation
* Re-add matrix init docs
* add rgblight code to example
* Remove keyboard init stuff for separate PR
* And and fix _noeeprom functions to many of the RGB Underglow functions
* Many functions are unnecessarily calling the eeprom write code. The toggle/enable is command is especially guilty of this, as it writes to EEPROM 3 times. But rgb mode writes twice, every time it's called. And init resets the rgb eeprom range and then writes back to it twice!
* Fixed the rgblight_sethsv_noeeprom to work as expected, by moving a lot of the code to a helper function.
* Added a noeeprom function for mode, enable, disable, and toggle functions. (didn't bother for increase/decrease stuff, and didn't add new keycodes)
* Add to predefined colors list
* Add new functions to manual/docs
* Update RGB Sleep feature to use _noeeprom
Because that's exactly what it should be doing, actually!
* Refresh & improve leader documentation page
- register_code/unregister_code are not the recommanded way to do macro.
- Provide some details I wish I had found when first used the leader
functionality.
* Add old way to use macro.
* Added Modular keyboards L,R and NUM
Created code modules for the 3 modules of the modular keyboard.
Original idea by MechboardsUK. Uses i2c implementation similar to lets
split
* Remove modular from master
This is to fix incorrect branching
* General fixes for RGB_matrix
- Complited speed support for all effects
- Fixed raindrop effects to initialized after toggle
- Fixed raindrop effects to use all available LEDs
- Fixed effect step reverse function
- Moved RGB_MATRIX_SOLID_REACTIVE under correct flag
* Documentation update for RGBmatrix
* More doc updates
* Added support for the upcomming Lets_split vitamins included
* Updated readme
* Corrected header of readme
* Enabled RGB
* Broke everything
* broke some more shit
* Revert "broke some more shit"
This reverts commit 6ad68e6269cc0d04c16564ce9598dfd3db1e23c1.
* Revert "Broke everything"
This reverts commit feeee4e40db15a726f2292b6a9406ef45c1e54a7.
* Fixed USB detection, and RGB on slave
* started modifying readme, to use msys2
* Added support for the upcomming Lets_split vitamins included
* Updated readme
* Corrected header of readme
* Enabled RGB
* Broke everything
* broke some more shit
* Revert "broke some more shit"
This reverts commit 6ad68e6269cc0d04c16564ce9598dfd3db1e23c1.
* Revert "Broke everything"
This reverts commit feeee4e40db15a726f2292b6a9406ef45c1e54a7.
* Fixed USB detection, and RGB on slave
* started modifying readme, to use msys2
* Updated readme to reflect use of msys2 Added avrdude to msys path
* added avrdude option to msys installer
* Removed extra installation of avrdude
* Renamed to vitamins_included and implemented drashnas changes
* Fixed include guard
* Fixed some includes, and added avrdude target to docs.
* Fixed default keyboard
* Added Modular keyboards L,R and NUM
Created code modules for the 3 modules of the modular keyboard.
Original idea by MechboardsUK. Uses i2c implementation similar to lets
split
* Remove modular from master
This is to fix incorrect branching
* Add effect speed support for RGB Matrix *No eeprom yet*
Keycodes RGB_SPI and RGB_SPD have been added to increase and decrease effect speed.
Speed is not saved in EEPROM yet as per Jack's request.
* Update rgb_matrix.c
* RGB Matrix speed fix rgblight.h
* More fixes for rgb speed. Speed functions declared but not used in rgblight
* More travis fixes..
* Another one for travis..
* Add pletcher keymap to dilly/keymaps
For the moment, this keymap just removes unneeded RGB keycodes, since
an iPad will cut the keyboard off if LEDs are turned on.
* Drop support for A_RSFT, add media and autoshift
* Lower USB_MAX_POWER_CONSUMPTION for dilly on iPad
* Document USB_MAX_POWER_CONSUMPTION
This config option is useful for limiting the requested power by, e.g.,
an iOS device. While the default value is 500, a much lower value--say,
50--can sufficiently power a small keyboard without LEDs.
* Add userspace to talljoe layout.
* Move more authority to userspace and create Bananasplit layout.
* Move more things into userspace.
* Common Core example
* More work on common layout.
* Num layer.
* talljoe-ansi layout
* Updates for Zeal60
* Add Zeal60 to 60_ansi_split_bs_rshift
* Swap Escape and Grave
* Num-layer tweaks
* More tweaks.
* Add 1up60rgb to world of layouts.
* Rename ansi_split_bs_rshift layout to hhkb.
* Control RGB Backlight.
* change capslock led
* Remove obsolete line from rules.mk.
* Add user-friendly userspace override.
* Fix enter for 1uprgb60
* Revert "Rename ansi_split_bs_rshift layout to hhkb."
This reverts commit 53133719db25c7cb6a199108bbf5d980481a45f4.
* Add Faux Clicky to main Audio feature
* Make clicky settings user configurable
* Add additional documentation
* Don't play when music mode is enabled (hopefully)
Some values that can never, ever, change were held in local
variables, rather than in PROGMEM. Fixed.
Change "pressed" to a signed int so the test for < 0 makes
sense, and to avoid possible weird failure modes in the
case where a key release comes in when pressed is already
zero. (Shouldn't happen, sure, but computers are weird.)
A lot of things in process_steno had external linkage for no
particular reason. They've been marked static. Stuff still
builds.
Distinguish between currently-held keys and keys that have
been held, and expose these values through a nicely-named API
so other code could, say, check on the current set of steno
chording in order to make displays. Also in passing fix up the
"state" value having external linkage so it could clash with
other people's variable declarations.
The API also provides hooks for key processing and steno chord
events, so you can monitor those events without having to
run in matrix_scan_user and recheck the values directly. Also
document these.
There is no path through processing a key that doesn't
end with a return false, so the nested return foo() are
gone and we just return false.
* Update feature_rgblight.md
I got caught out with this as most color pickers use a percentage NOT 0-255 for this number
* Amended description
Woops! Was focused on s/v not being a percentage i got h wrong.
* Generate api docs from source code
* Add a bunch of doxygen comments
* more doxygen comments
* Add the in-progress api docs
* script to generate docs from travis
* Add doc generation to the travis job
* make travis_docs.sh commit the work it does
* make sure the docs script exits cleanly
* Macro for a momentary layer switch with mods
Passes through to the existing ACTION_LAYER_MODS macro, albeit with more
limited options due to lack of space in the quantum_keycodes enum.
* Add documentation for LM layer-mod macro
* Clean up Tap Toggle documentation
* Skip process_music in NO_MUSIC_MODE is defined
* Skip matrix_scan_music if NO_MUSIC_MODE is defined
* Skip music_all_notes_off if NO_MUSIC_MODE is defined
* Leave matrix_scan_music in, because it reduces firmware size by 150b....
* Add docs for NO_MUSIC_MODE
* add breathing to bananasplit
* backlight breathing overhaul
* fix the backlight_tick thing.
* fix for vision_division backlight
* fix a few keymaps and probably break breathing for some weirdly set-up boards.
* remove BL_x keycodes because they made unreasonable assumptions
* some fixes for BL keycodes
* integer cie lightness scaling
* use cie lightness for non-breathing backlight and make breathing able to reach true max brightness
* new planck keymap, new feature - hybrid shift/enter action key (great for small keyboards!)
* corrected documentation to specify rules.mk file instead of Makefile
This link was broken. And the latest, live version of that keymap link doesn't line up with the docs below, so the link will now point to the older version of the file in the git history
* pull fuse settings for bootloader jump
* fix 32a chips
* make automatic bootloader selection optional
* quantify bootloaders
* fixs #164, speeds up dfu reset
* fix for chips w/o usb
* missing an n
* fix bootloader sizes, use words for addresses
* fix bmini, pearl, and [[ issue, make things quiet
* ignore avr errors on arm for now
* update settings for the light
* document bootloader stuff
* add bootloader title
This is particularly relevant for, e.g., the ergodox EZ and
other keyboards with slow scan rates. Without changing the API or
behavior of individual process_record() calls, we allow a
configuration flag to make multiple calls in a single scan.
This will probably have miniscule effects on non-steno users,
and it's not enabled by default for any keyboards. Added note
about it to ergodox README.
Signed-off-by: seebs <seebs@seebs.net>
* Set up tap dance for layers on the lower button.
* Refactored code to share in the users directory between my two keyboard layouts.
* Small keyboard layout change.
* Updated documentation on oneshot usage in macros/tap dance.
* Typo: Github => GitHub
* Typo: windows => Windows, docker => Docker, and some punctuations
* "QMK Introduction" links to the right file
* "Unix" rather than "UNIX", which is a trademark
* Directory name is "keyboards", not "keyboard"
* "handwired" is a subdirectory of "keyboards"
* Punctuation and minor fixes
* macOS rather than Mac
* Punctuation and other minor fixes
* Vagrant Guide links to an existing file
* Jun Wako referenced with his name rather than his nickname
* Saxon genitive 's outside the link
* add RETRO_TAP: tap anyway, even after TAP_TERM, if no interruption
* consistent variable name
* add option doc
* change name for consistency
* make RETRO_TAPPING default to off
I'm almost 100% sure "else if (state->count = 2) {" was a typo (it should have two ='s for a logical operator), and I'm *pretty* sure "if (state->interrupted || state->!pressed) return SINGLE_TAP;" has a typo. At least, it returns an error on my machine saying something about an unexpected '!'.
I changed it to a slightly longer form (i.e., "state->pressed==0"), and that worked fine.
This commit adds a new keycode `RGB_SMOD` which is the same as `RGB_MOD` (cycle through all modes),
but when it is used in combination with shift it will reverse the direction.
* Added section to example, detailing how to accomplish the
'quad-function' tap dance.
* Refactored TD documentation to clearly separate different complex
examples
Change-Id: Ifc1495d1142849c771418fdabc458c04c48311e6
* Address #1689 by using a formula to define the breathing curve and exposing defines to control the shape of the curve.
* Tweak the behavior of breathing for clueboard
* redo make args to use colons, better folder structuring system [skip ci]
* don't put spaces after statements - hard lessons in makefile development
* fix-up some other rules.mk
* give travis a chance
* reset KEYMAPS variable
* start converting keyboards to new system
* try making all with travis
* redo make args to use colons, better folder structuring system [skip ci]
* don't put spaces after statements - hard lessons in makefile development
* fix-up some other rules.mk
* give travis a chance
* reset KEYMAPS variable
* start converting keyboards to new system
* try making all with travis
* start to update readmes and keyboards
* look in keyboard directories for board.mk
* update visualizer rules
* fix up some other keyboards/keymaps
* fix arm board ld includes
* fix board rules
* fix up remaining keyboards
* reset layout variable
* reset keyboard_layouts
* fix remainging keymaps/boards
* update readmes, docs
* add note to makefile error
* update readmes
* remove planck keymap warnings
* update references and docs
* test out tarvis build stages
* don't use stages for now
* don't use stages for now
At one time, "ez" and "infinity" may have been subprojects of a
unified "ergodox" project, but this is not currently the case. Running
`make ergodox-ez-default-teensy` (or similar), as the documentation
currently implies, does not work.
* Remove all Makefiles from the keyboards directory.
* update keymaps added in the last 8 days
* Ignore keyboard/keymap makefiles
* update hand_wire to reflect our new Makefile-less reality
* Update the make guide to reflect the new reality
* move planck keymap options to rules.mk
* update planck keymaps 4real
* trigger travis
* add back build_keyboard.mk
* restore changes to build_keyboard
* Allow the knight animation to be restricted to a portion of the LED strip
* Add keys for jumping directly to particular animation modes
* Remove orphaned break statements
* Tweak the `RGB_MODE` buttons so they cycle through the same mode.
* small indentation fix
`avr-libc` is no longer, and it's called `avr-gcc` now. https://github.com/osx-cross/homebrew-avr
Also you need `gcc-arc-none-eabi` to be able to compile in my experience.
* include variables and .h files as pp directives
* start layout compilation
* split ergodoxes up
* don't compile all layouts for everything
* might seg fault
* reset layouts variable
* actually reset layouts
* include rules.mk instead
* remove includes from rules.mk
* update variable setting
* load visualizer from path
* adds some more examples
* adds more layouts
* more boards added
* more boards added
* adds documentation for layouts
* use lowercase names for LAYOUT_
* add layout.json files for each layout
* add community folder, default keymaps for layouts
* touch-up default layouts
* touch-up layouts, some keyboard rules.mk
* update documentation for layouts
* fix up serial/i2c switches
It looks like build_environment_setup.md got renamed to
getting_started_build_tools.md in this commit:
commit e6c638bed1
Author: skullY <skullydazed@gmail.com>
Date: Sat Aug 5 20:54:34 2017 -0700
Overhaul the Getting Started section and add a FAQ section
docs/{build_environment_setup.md => getting_started_build_tools.md} | 132 ++++++++++++++++++++++++++++++++++++-------------------------------------
This commit adjusts the links to match the new name.
Instead of having all sendstring keycode mappings in the main quantum.c
file, give each one its own file in keymap_extras that can be #included
in a user's keymap. If one is included, it will define the appropriate
lookup tables and overwrite the weak definitions in quantum.c.
(Including more than one sendstring definition will fail at compile
time.)
Update @rai-suta's test keymap to match, as well as the documentation.
* SCKLCK is now SCROLLLOCK
Yes, with all three Ls
At least it doesn't have a random K anymore lol
* Removed strange mystery trailing numbers in the docs
