Commit Graph

236 Commits

Author SHA1 Message Date
Takeshi ISHII
6d6d91c834 rgblight.[ch] more configurable (#3582)
* add temporary test code rgblight-macro-test1.[ch]

* rgblight.h : mode auto numberring and auto generate mode name symbol

No change in build result.

* rgblight.c use RGBLIGHT_MODE_xxx symbols

No change in build result.

* quantum.c use RGBLIGHT_MODE_xxx symbols

No change in build result.

* fix build break. when RGB_MATRIX_ENABLE defined

* add temporary test code rgblight-macro-test2.[ch]

* modify rgblight_mode_eeprom_helper() and rgblight_sethsv_eeprom_helper()

* modify rgblight_task()

* configurable each effect compile on/off in config.h

* update docs/feature_rgblight.md

* fix conflict. docs/feature_rgblight.md

* remove temporary test code rgblight-macro-test*.[ch]

* fix comment typo.

* remove old mode number from comment

* update docs/feature_rgblight.md about effect mode

* Revert "update docs/feature_rgblight.md about effect mode"

This reverts commit 43890663fcc9dda1899df7a37d382fc38b1a6d6d.

* some change docs/feature_rgblight.md

* fix typo

* docs/feature_rgblight.md update: revise mode number table
2018-09-13 10:24:09 -07:00
Drashna Jaelre
32ff7be266 Fix RG Sleep issues for Teensy Controllers
Appearenly, teensy controllers have some issues with waking up.  If the rgblight is called "too soon", it will cause the controller to lock up, intermittently. Adding a 10 ms
delay seems to fix this issue, as it lets it have enough time to handle things properly.

This has been tested extensively on my Ergodox EZ, and can be seen in the @drashna userspace, under the "suspend_wakeup_init_user" function.
2018-09-11 13:05:17 -07:00
patrickmt
e5465e1c57 CTRL and ALT updates
Added support to enter bootloader from software (bootloader version must be newer than "v2.18Jun 22 2018 17:28:08" until workaround for older is created).
Updated CTRL and ALT keymaps for entering bootloader with Fn+b held for >500ms.
Added basic MacOS keymap for ALT.
USB sleep LED indicator now turns off after 1 second.
Slowed down debug LED code printing.
2018-09-05 11:14:31 -07:00
Jack Humbert
a14eb01883 fix mousekey call 2018-09-03 16:59:32 -07:00
Steven Liu
fa1ee47cf2 Enable mouse keys in register_code and unregister_code
This allows for macros to be assigned to press two mouse directions at same time, which allows for one key diagonals.
2018-09-03 19:27:11 -04:00
ishtob
94f92cedef Fix emulated EEPROM start address on STM32F303 (#3819)
MCU has 254 flash, changed 250 to 254. tested working on a planck rev6
2018-08-31 07:37:13 -07:00
yiancar
621ce29a53 STM32 EEPROM Emulation (#3741)
* STM32 EEPROM Emulation

- Added EEPROM emulation libaries from libmaple and Arduino_STM32. https://github.com/rogerclarkmelbourne/Arduino_STM32 and https://github.com/leaflabs/libmaple.
- Renamed teensy EEPROM library and added conditional selection of library.
- Remapped EEPROM memory map for 16 byte blocks (as is with STM32f3xx MCUs).
- Added EEPROM initialization in main.c of Chibios.
- Added EEPROM format to clear the emulated pages when EEPROM is marked as invalid.

* Fixed ifdef
2018-08-29 16:14:49 -04:00
patrickmt
30680c6eb3 Massdrop keyboard support (#3780)
* Massdrop SAMD51

Massdrop SAMD51 keyboards initial project upload

* Removing relocated files

Removing files that were relocated and not deleted from previous location

* LED queue fix and cleaning

Cleaned some white space or comments.
Fix for LED I2C command queue.
Cleaned up interrupts.
Added debug function for printing numbers to scope through m15 line.

* Factory programmed serial usage

Ability to use factory programmed serial in hub and keyboard usb descriptors

* USB serial number and bugfix

Added support for factory programmed serial and usage.
Incorporated bootloader's conditional compiling to align project closer.
Fixed issue when USB device attempted to send before enabled.
General white space and comment cleanup.

* Project cleanup

Cleaned up project in terms of white space, commented code, and unecessary files.
NKRO keyboard is now using correct setreport although KBD was fine to use.
Fixed broken linkage to __xprintf for serial debug statements.

* Fix for extra keys

Fixed possible USB hang on extra keys report set missing

* I2C cleanup

I2C cleanup and file renames necessary for master branch merge

* Boot tracing and clocks cleanup

Added optional boot debug trace mode through debug LED codes.
General clock code cleanup.

* Relocate ARM/Atmel headers

Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes.

* Pull request changes

Pull request changes

* Keymap and compile flag fix

Keymap fix for momentary layer.
Potential compile flag fix for Travis CI failure.

* va_list include fix

Fix for va_list compile failure

* Include file case fixes

Fixes for include files with incorrect case

* ctrl and alt67 keyboard readme

Added ctrl and alt67 keyboard readme files
2018-08-29 15:07:52 -04:00
fauxpark
700aa8fe1c Tidy up keycode.h (#3666)
* Tidy up keycode.h

* Fix spacing here

* Add back this comma
2018-08-16 12:12:48 -04:00
Jack Humbert
0284431ad9 add col type defines 2018-07-20 23:09:25 -04:00
Max Audron
bbea9dadbc Integrating Peter Fleury's HD44780 LCD library (#3209)
* integrated Peter Fleury's LCD library for HD44780 LCDs

* fixed typo

* cleanup finished

* add documentation

* added HD44780 documentation

* removed keyboard from .gitmodules

* resolved merge conflict

* removed edit of kira75s rules.mk made by merge

* moved hd44780 to drivers/avr

* Added licence info to hd44780 files

* Added link to hd44780 docs.
2018-07-15 13:31:45 -04:00
Evgeniy Petukhov
03381962ac Diagonal micro move fix 2018-06-28 22:10:53 -04:00
Drashna Jaelre
526eabb6f8 Make sure that both RGBLIGHT_ENABLE is defined, for RGBLIGHT_SLEEP 2018-06-28 22:08:26 -04:00
Drashna Jaelre
ee3b9d2ef0 Disable JTAG in keyboard init
So that all boards, present and future will have JTAG disabled, even if using a custom matrix
2018-06-28 08:52:21 -04:00
Fred Sundvik
c5db272c91 Make sure the timer wraps around correctly independent of the os tick frequency 2018-06-28 08:51:30 -04:00
Drashna Jaelre
cb91320d6d Add Suspend functions (#3112)
* Add suspend functions

* Disable RGB code if it's disabled

* Add suspend code to ChibiOS for future compatibility

* Add keyboard_init functions

* Change where references so it will compile

* Wrong command chained in wake up kb function

* Fix non-feature file changes

* Add documentation

* Re-add matrix init docs

* add rgblight code to example

* Remove keyboard init stuff for separate PR
2018-06-03 17:57:35 -04:00
Drashna Jaelre
751719e6cb Add and fix _noeeprom functions to many of the RGB Underglow functions (#3070)
* And and fix _noeeprom functions to many of the RGB Underglow functions

* Many functions are unnecessarily calling the eeprom write code. The toggle/enable is command is especially guilty of this, as it writes to EEPROM 3 times.  But rgb mode writes twice, every time it's called. And init resets the rgb eeprom range and then writes back to it twice!
* Fixed the rgblight_sethsv_noeeprom to work as expected, by moving a lot of the code to a helper function.
* Added a noeeprom function for mode, enable, disable, and toggle functions. (didn't bother for increase/decrease stuff, and didn't add new keycodes)
* Add to predefined colors list
* Add new functions to manual/docs

* Update RGB Sleep feature to use _noeeprom

Because that's exactly what it should be doing, actually!
2018-05-29 11:05:22 -04:00
Leo Wzukw
2d38f45009 Fix dead link to USB keycodes doc (#3050)
* Fix dead link to USB keycodes doc

Link was dead and the fresher version I could find on usb.org is still older than this one.

Thus, WaybackMachine seems the best option.

* Fix dead link to USB keycodes doc, with 2 options

Give the WaybackMachine link (fresher and for reference of the content of the original link) and the usb.org one (older)
2018-05-26 08:51:51 -07:00
Drashna Jaelre
8729be5434 Fix compile issues for atmega328p 2018-05-20 21:30:14 -07:00
Gergely Nagy
38f204db30 Allow one-shot modifiers to be chained
Many a times one would want to use multiple modifiers with the same key,
preferably without having to hold anything, like `Ctrl+Shift+C` or
`Ctrl+Shift+V` to copy/paste in GNOME Terminal. To make this possible, we need
to be able to chain one-shot modifiers, so that we can have multiple of them
active at the same time.

The easiest way to accomplish this is that whenever we activate a one-shot
modifier, we apply it on top of the existing set, instead of re-setting the
state. When deactivating, either due to an interrupt, or due to a timeout, we
deactivate all oneshots anyway, so the clearing part is covered. When we turn
the one-shot modifier into a toggle, that will also clear all one-shot modifiers
first, so we covered that case too.

Fixes #2796, #1580, and #856.

Signed-off-by: Gergely Nagy <qmk@gergo.csillger.hu>
2018-05-14 10:09:28 -04:00
Jack Humbert
e7d4bc5291 enable eeprom for rgb matrix 2018-05-08 18:13:09 -04:00
U-LANDSRAAD\drashna
bdb718af0d Fix RGB Sleep code 2018-03-28 15:37:00 -04:00
skullydazed
7c9d5ace14 Generate API docs from source code comments (#2491)
* Generate api docs from source code

* Add a bunch of doxygen comments

* more doxygen comments

* Add the in-progress api docs

* script to generate docs from travis

* Add doc generation to the travis job

* make travis_docs.sh commit the work it does

* make sure the docs script exits cleanly
2018-03-22 02:50:38 -04:00
Drashna Jaelre
ff728a8a01 [Proposal?] Allow RGB Underglow to turn off when host is idle/asleep (#2104)
* Add RGB Underglow Sleeping

* Add RGBLIGHT_SLEEP to toggle/control RGB light behavior

* Update rgb docs

* Update for RGB disable command
2018-03-19 23:59:58 -04:00
fauxpark
a2e12faa19 Add CMD and WIN aliases for KC_GUI, GUI(kc), GUI_T(kc), etc. 2018-03-16 16:37:44 -04:00
Joe Wasson
5d771039ad Fix swap-hands tapping.
This is an inelegant hack for #2522 but makes things work. Basically we give `action.c` a chance to handle the hold event early so that we can swap the keyboard for later keys. Later, to allow the hold to happen again quickly we nuke the key record so that tapping is reset. I tried to find a cleaner way, honestly.
2018-03-16 16:33:43 -04:00
Joe Wasson
7230923b05 Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 2018-03-16 16:33:43 -04:00
Fred Sundvik
8c2ae4a470 Fix reset for STM32 devices 2018-02-10 17:13:38 -05:00
fredizzimo
53ff8a31b6 Merge ChibiOS and LUFA descriptor support (#2362)
* Move lufa descriptor to protocol/usb_descriptor

* Try to compile usb_descriptor on ChibiOS

* Add lufa_utils for ChibiOS

Lufa USB descriptors for ChibiOS

* More lufa_util compatibility fixes

* First compiling version of shared USB descriptor

* Send the usb descriptors

* Fix the CONSOLE output on ChibiOS

* Add errors for unsupported interfaces

* Enable support for vitual serial port USB descriptors

* Implement virtual serial port for ChibiOS

* Cleanup the lufa_utils

Use the default lufa header files

* Add raw hid support for ChibiOS

This is completely untested

* Enable midi compilation on ChibiOS

* Move midi functionality out of lufa.c

* Don't register sysex callback when not needed

* ChibiOS compilation fixes

* Update ChibiOS submodule

* Fix the Midi USB descriptor

It didn't work properly when both Midi and Virtual serial port was enabled.

* Add MIDI support for ChibiOS

* Fix USB descriptor strings on ChibiOS

* Use serial usb driver for raw hid

* Generalize the ChibiOS stream like drivers

This makes the initialization much more simple and eliminates a lot of
the code duplication.

* Convert console output to chibios stream driver

* Fixes for ChibiOS update

* Update the ChibiOS contrib submodule

To include the usb data toggle synchronization fixes

* Fix duplicate reset enumeration on ChibiOS

* Add missing include

* Add number of endpoints check for ChibiOS

* Enable serial USB driver on all keyboards

* Add missing includes when API is enabled withot midi

* Add another missing inlcude
2018-02-08 15:07:46 -05:00
Fred Sundvik
a14d539ad6 Revert back to normal sleeping wait behaviour for STM32 2018-01-21 01:10:16 -08:00
Kenneth Aloysius
365b863578 Backlighting for JJ40 and underglow initialisation code (#2260)
* Cleanup Mechmini keymap. Once the custom RGB function is defined, there is no need to manually handle RGB code.

* Change default to KEYMAP_MIT, not KEYMAP_OFFSET

* Add custom RGB code for JJ40

* Reset Mechmini advertised power draw to 500. Will have to test actual maximum power draw later.

* RGB working on JJ40.

* Fix: saturation increase/decrease flipped

* Add new directory for my custom keymap with RGB keycodes

* Swap LAlt and LGUI

* Update JJ40 max power draw with measured value

* Update: fun40 rules.mk to enable underglow; earlier failed Travis CI

* Fix: init RGB LEDs on boot. Also added HHKB-like keymap for XD60.

* Super rudimentary backlight test, init RGB LEDs on boot

* Backlighting works - stays on for now

* Toggling working

* Now can override backlight.c functions. Problem was functions in backlight.c weren't called before due to a lack of matrix_scan_quantum() in matrix.c

* Timers not working

* Delete global.h

* Cleanup

* Compiles

* Good sign: LEDs stop working again

* Handle timer1 overflow

* Progress: fix: forgot to init

* Backlighting fully working now except breathing.

* Revert keymap to original keycodes

* Update XD60 keymap README

* Update JJ40 keymap with backlight toggles

* Breathing working just fine.

* Update references

* Add backlight_set() call

* Cleanup code to disable backlight

* Fix: does not compile

* Fix: missing call to rgblight_task.

* Testing with BACKLIGHT_BREATHING

* Cleanup

* Cleanup comments

* More commenting cleanup.

* Do not enable BACKLIGHT_BREATHING by default
2018-01-18 16:02:32 -05:00
Balz Guenat
4931510ad3 backlight breathing overhaul (#2187)
* add breathing to bananasplit

* backlight breathing overhaul

* fix the backlight_tick thing.

* fix for vision_division backlight

* fix a few keymaps and probably break breathing for some weirdly set-up boards.

* remove BL_x keycodes because they made unreasonable assumptions

* some fixes for BL keycodes

* integer cie lightness scaling

* use cie lightness for non-breathing backlight and make breathing able to reach true max brightness
2018-01-01 17:47:51 -05:00
fauxpark
b3bcafcc4b Unsign key argument in add_key_to_report 2017-12-19 09:25:26 -05:00
Colin T.A. Gray
bad839e6ac make 'layer_state_set' visible to user code 2017-12-15 13:23:30 -05:00
Colin T.A. Gray
3aec9a4354 fixes 'layer_state_cmp' when layer is '1' (aka layer 0, aka layer 1<<0) 2017-12-15 13:23:30 -05:00
Colin T.A. Gray
1620d78e73 helper to compare current layer_state to user layer
Performs the same bit comparison that the layer_move
functions perform
2017-12-08 16:09:47 -05:00
Jack Humbert
9fdc276260
Updates bootloader settings, adds file size check (#2029)
* pull fuse settings for bootloader jump

* fix 32a chips

* make automatic bootloader selection optional

* quantify bootloaders

* fixs #164, speeds up dfu reset

* fix for chips w/o usb

* missing an n

* fix bootloader sizes, use words for addresses

* fix bmini, pearl, and [[ issue, make things quiet

* ignore avr errors on arm for now

* update settings for the light

* document bootloader stuff

* add bootloader title
2017-11-27 23:08:21 -05:00
Colin T.A. Gray
3e2fd64279 I found a typo! 2017-11-22 11:40:46 -05:00
Seebs
39d3d92364 Allow multiple process_record() calls per scan
This is particularly relevant for, e.g., the ergodox EZ and
other keyboards with slow scan rates. Without changing the API or
behavior of individual process_record() calls, we allow a
configuration flag to make multiple calls in a single scan.

This will probably have miniscule effects on non-steno users,
and it's not enabled by default for any keyboards. Added note
about it to ergodox README.

Signed-off-by: seebs <seebs@seebs.net>
2017-11-21 00:20:52 -05:00
Takayuki Matsubara
27ee425892 add pgm_read_dword for Infinity ErgoDox
avoid the following error when `UNICODEMAP_ENABLE = yes`:

```
quantum/process_keycode/process_unicodemap.c:52:21: error: implicit declaration of function 'pgm_read_dword'
```
2017-11-06 12:09:54 -05:00
Jack Humbert
cf9f6bbd91 adds per-layer rgb color option to ez 2017-11-06 08:38:36 -05:00
tsankuanglee
04b9b62bdc RETRO_TAPPING (#1922)
* add RETRO_TAP: tap anyway, even after TAP_TERM, if no interruption

* consistent variable name

* add option doc

* change name for consistency

* make RETRO_TAPPING default to off
2017-10-31 11:15:22 -04:00
Joe Martin
b91ffba4be #1792 added in waits from tmk for locking switches
fixes #1792
2017-10-10 07:15:41 -10:00
Snipeye
ee13228486 Generic Pointing Device (#1767) 2017-10-06 07:13:08 -10:00
Fred Sundvik
25285a1c5a Don't process keycodes on the slave 2017-09-30 06:22:02 -10:00
skullydazed
5fd68266f5 Clueboard 60% support (#1746)
* initial clueboard_60 support

* LED lighting support

* fix the clueboard->clueboard_66 rename

* Add layout support to clueboard_60

* Fix the 60_iso layout so it's actually iso

* add a default keymap for AEK layout

* fix clueboard_17

* Fixup the ISO layouts

* Fix the `wait_ms()/wait_us()` definitions for chibios

* Fix up the wait_ms/wait_us hack. Reduce stack size.

* Add a missing #include "wait.h"

* commit files that should have already been comitted
2017-09-29 16:17:30 -07:00
Joe Wasson
bae1144a9f Fix compilation error when NO_ACTION_LAYER is defined. 2017-08-20 11:51:57 -04:00
Balz Guenat
2aa5e44640 some major steps toward making the usb-usb converter work 2017-08-15 23:14:41 -04:00
Martin Sandiford
c622423668 Remove floating point calculation in mouse move. Saves approx 650 bytes if no other floating point used. 2017-08-15 19:51:06 -04:00
That-Canadian
26650731d1 Added "EECONFIG_HANDEDNESS" to the eeconfig.h , because when RGB was enabled it was overwritting the old EECONFIG_HANDEDNESS address (10), so it is now on a non-conflicting addres (14).
Updated MiniDox split_util.h and eeprom files to reflect this change.

I recommend adding this to any split board that used these files, my changes will not effect them currently.
2017-08-13 14:24:04 -04:00