Commit Graph

1140 Commits

Author SHA1 Message Date
Stefan Kerkmann
d717396708
[Core] Add Raspberry Pi RP2040 support (#14877)
* Disable RESET keycode because of naming conflicts

* Add Pico SDK as submodule

* Add RP2040 build support to QMK

* Adjust USB endpoint structs for RP2040

* Add RP2040 bootloader and double-tap reset routine

* Add generic and pro micro RP2040 boards

* Add RP2040 onekey keyboard

* Add WS2812 PIO DMA enabled driver and documentation

Supports regular and open-drain output configuration. RP2040 GPIOs are
sadly not 5V tolerant, so this is a bit use-less or needs extra hardware
or you take the risk to fry your hardware.

* Adjust SIO Driver for RP2040

* Adjust I2C Driver for RP2040

* Adjust SPI Driver for RP2040

* Add PIO serial driver and documentation

* Add general RP2040 documentation

* Apply suggestions from code review

Co-authored-by: Nick Brassel <nick@tzarc.org>

Co-authored-by: Nick Brassel <nick@tzarc.org>
2022-06-30 13:19:27 +02:00
Drashna Jaelre
0da6562c4d
Make default layer size 16-bit (#15286)
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2022-06-19 07:37:51 +10:00
Drashna Jaelre
0ab51ee29d
Add support for large Mouse Reports (#16371)
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2022-06-08 18:39:16 -07:00
Stefan Kerkmann
4d107feca9
Check for ongoing transfers on the OUT endpoint (#16974)
...when attempting to start a receiving USB transfer. Previously, we would
check on the IN endpoint which is the transmitting part of the USB endpoint.
This is wrong and lead to two USB transfers being started immediately
after each other in case of e.g. RAW HID endpoints:

1. When finishing an OUT transfer the low level USB driver calls the out_cb
callback, which in turn initiates another OUT transfer by calling
qmkusbDataReceived.

2. When the raw hid receive channel runs empty inside the raw_hid task,
another OUT transfer is started to potentially fill the channel again. This
happens by calling ibnotify.

Both events occur directly after each other, thus triggering the bug.
2022-05-14 23:17:14 +01:00
Ryan
645359e5d0
Joystick: Simplify report descriptor and clean up error messages (#16926) 2022-04-26 08:54:34 +10:00
QMK Bot
97f4a75fd7
[CI] Format code according to conventions (#16914) 2022-04-22 17:48:06 +10:00
dexter93
e4942df397
Chibios USB protocol: allow overriding RAW Capacity (#16339) 2022-04-22 17:36:32 +10:00
Sascha
bf67abb046
Fixed usb read loops not reading until timeout (#16827)
* the size variable was redeclared (hiding the variable of the outside scope) and therefore the while check was always false, so the compiler just removed the do while loop, but it would be better to read all data and only exit the task, after this is done
2022-04-10 00:27:02 +02:00
QMK Bot
223bc47658 Merge remote-tracking branch 'origin/master' into develop 2022-03-19 17:41:15 +00:00
Joel Challis
047ef3cd12
VUSB - Use correct endpoint poll for VIA (#16691) 2022-03-19 17:40:47 +00:00
Drashna Jaelre
921b9dad6c
[Core] Move has_mouse_report_changed function to report.c (#16543)
* Move 'has_mouse_report_changed' checkto report.c

* change mousekeys to use memcpy

* fix linting issues
2022-03-14 00:01:47 +00:00
Joel Challis
7fb312ccd7
Fix use of ISSI driver config before init (#16493) 2022-03-03 22:35:51 +00:00
QMK Bot
25ba9b41c1
Format code according to conventions (#16421) 2022-02-21 08:29:54 -08:00
QMK Bot
63646e8906
Format code according to conventions (#16322) 2022-02-12 18:29:31 +00:00
Joel Challis
f7e7671f69
Migrate more makefile utilities to builddefs sub-directory (#16002) 2022-02-10 09:45:51 -08:00
Nick Brassel
ae6f471f1c
Modify the output of the size checks. (#16290) 2022-02-10 08:50:55 +11:00
Thomas Weißschuh
f1cd2a5a89
ChibiOS: add support for HID Programmable Buttons (#15787)
* ChibiOS: add support for HID Programmable Buttons

Fixes #15596

* Enable SHARED_ENDPOINT when PROGRAMMABLE_BUTTON is enabled

The Programmable Button driver expects the shared EP to be enabled.
So enforce this invariant.
2022-02-04 22:25:57 +00:00
Ryan
7d685956cc
Rename AdafruitBLE to BluefruitLE (#16127) 2022-01-30 17:29:42 +00:00
Stefan Kerkmann
5470e4a8ad
[Core] ChibiOS: shorten USB disconnect state on boot to 50ms (#15805) 2022-01-10 15:01:20 -08:00
Ryan
6bc870d899
Refactor bootloader_jump() implementations (#15450)
* Refactor `bootloader_jump()` implementations

* Fix tests?

* Rename `atmel-samba` to `md-boot`
2021-12-27 21:10:07 +11:00
Ryan
77d3e564f7
Migrate RN42 to UART driver and refactor (#15492) 2021-12-22 16:51:39 +11:00
Drashna Jaelre
9d7e64bcb3
Remove Deprecated USB Polling comment from vusb.c (#15420) 2021-12-07 19:57:33 +11:00
QMK Bot
a83731660d Merge remote-tracking branch 'origin/master' into develop 2021-11-30 05:54:51 +00:00
Ryan
ed49dbeac4
Add missing virtser_init() to ChibiOS code (#15356) 2021-11-30 16:54:18 +11:00
Drashna Jaelre
b5a5bb6d74
Change default USB Polling rate to 1kHz (#15352) 2021-11-29 17:18:54 -08:00
Drashna Jaelre
ac00b6da29
[Bug] Fix timer include in override_wiring.c (#15221)
* [Bug] Fix timer include in override_wiring.c

* add platforms to keep parity with old method
2021-11-19 21:22:45 +00:00
Joel Challis
2728603fe6
Move tmk_core/common/<plat> (#13918) 2021-11-19 10:41:02 -08:00
Nick Brassel
36d123e9c5
Add support for deferred executors. (#14859)
* Add support for deferred executors.

* More docs.

* Include from quantum.h

* Cleanup.

* Parameter checks

* Comments.

* qmk format-c

* I accidentally a few words.

* API name change.

* Apply suggestions from code review

Co-authored-by: Sergey Vlasov <sigprof@gmail.com>

* Review comments.

* qmk format-c

* Review comments.

Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
2021-11-15 18:21:09 +00:00
Joel Challis
f3fa56c32a
gcc10 LTO - Only specify adhlns assembler options at link time (#15115)
* gcc10 LTO - Only specify adhlns assembler options at link time

* Default adhlns off?
2021-11-12 18:31:40 +11:00
uqs
5bb5bb1e28
Fix parallel builds w/ LTO on systems where make is not GNU make. (#13955) 2021-11-05 09:21:43 -07:00
Nick Brassel
5da04fb45b
Update to ChibiOS 20.3.4, support builds against trunk (#14208)
* Add support for building against ChibiOS svn/trunk.

* Swap to 21.6.x

* Update to latest branch revision as released version is broken.

* Updated configs.

* Conf updates.

* Updated ChibiOS

* Convert STM32L422 to actual L422 ChibiOS platform.

* Downgrade to 20.3.4 as ChibiOS 21.6.x is being aborted.

* Rollback L422-based boards.
2021-11-03 08:26:40 +11:00
Nick Brassel
387edab52b
Fixup #15029 (#15031) 2021-11-02 19:54:16 +00:00
Joel Challis
634e42b2b4
Revert to old init order for host driver (#15029)
* Partially revert 14888
2021-11-02 18:53:46 +00:00
Nick Brassel
0ecd4926b2
Fix build failures caused by #12947. (#15019)
* Fix build failures caused by #12947. Unknown if this actually works.

* qmk format-c
2021-11-02 10:18:33 +00:00
Purdea Andrei
76fb54403c
haptic: Feature to disable it when usb port is not configured or suspended. (#12692)
This also add support for specifying a LED pin to indicate haptic status,
and also adds support for a haptic-enable pin, which is useful to turn off
the boost converter on the solenoid driver.
2021-11-02 16:54:29 +11:00
Joel Challis
7ae0f371cf
Add support to persist MD LED framework settings (#14980)
* Add support to persist MD LED framework settings

* avoid out-of-bounds errors when SmartEEPROM is not enabled

* Update brightness defaults

* clang
2021-11-02 09:45:30 +11:00
Michael Stapelberg
7f8faa429e
core: make the full 4096 bytes of EEPROM work on Teensy 3.6 (#12947)
This commit updates QMK’s copy of the the teensy3 Arduino core code with the
necessary changes to make the Teensy 3.6 work.

Aside from different values for the partitioning, HSRUN mode must be left
temporarily while using the EEPROM.

fixes https://github.com/kinx-project/kint/issues/8

related to https://github.com/kinx-project/kint/issues/10
2021-11-01 21:52:34 +00:00
Joel Challis
92385e30cd
Manually format develop (#15003) 2021-11-01 19:18:33 +00:00
Joel Challis
ee371c1295
Fix up issues shown by clang-format of vusb (#15004) 2021-11-01 18:57:37 +00:00
just-another-jxliu
736d9fa538
Stop-gap forward-port Drop LED features for CTRL and ALT (#14967) 2021-10-29 13:11:48 -07:00
Joel Challis
55fb468d74
More platform/protocol alignment (#14976) 2021-10-29 11:16:19 +01:00
Joel Challis
dcfffa7b67
Relocate protocol files within tmk_core/common/ (#14972)
* Relocate non platform files within tmk_core/common/

* clang
2021-10-28 22:31:59 +01:00
Joel Challis
0c87e2e702
Move LTO logic from common.mk (#14973) 2021-10-28 21:02:22 +01:00
Joel Challis
780e763c13
Remove SERIAL_MOUSE (#14969) 2021-10-28 02:43:51 +01:00
Joel Challis
2ec268bd21
Begin to carve out platform/protocol API - Migrate keyboard_* calls (#14888) 2021-10-24 20:39:41 +01:00
QMK Bot
3b04425f1a Merge remote-tracking branch 'origin/master' into develop 2021-10-23 04:04:47 +00:00
Dasky
1953a968c5
Check usb transmit status in send_extra() (#14643) 2021-10-23 15:04:15 +11:00
Joel Challis
0093d3d761
Initial USB2422 driver (#14835) 2021-10-22 00:49:58 +01:00
Joel Challis
1b1f3ec68e
Split out arm_atsam shift register logic (#14848) 2021-10-22 00:49:38 +01:00
Joel Challis
1b93d576f8
Fix ccache default (#14906) 2021-10-22 10:21:43 +11:00