Commit Graph

14 Commits

Author SHA1 Message Date
noroadsleft
7f4f0f7685 Remove deprecated QUANTUM_DIR code blocks from makefiles (#4754)
* Remove QUANTUM_DIR code blocks from keyboard rules

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect entire keyboards.

* remove QUANTUM_DIR code blocks from rules for default keymaps

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect default keymaps.

* remove QUANTUM_DIR code blocks from rules for user keymaps

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect "user" keymaps. (It's actually any keymap
that isn't named `default`.)

* remove QUANTUM_DIR code blocks from rules for community layouts

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for community layouts.

* remove QUANTUM_DIR code blocks from rules for userspaces

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for userspaces.
2019-01-04 07:25:48 -08:00
Takeshi ISHII
30c3f3b2bd Keymap: Add Helix/pico keymap 'mtei' (#4696)
* add pico keymap 'mtei'

* num layer key change
2018-12-20 09:50:51 -08:00
MakotoKurauchi
29830f306f Keyboard: Pr/helixpico add layout kc (#4686)
* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL

* add define USB_MAX_POWER_CONSUMPTION

* Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk

rules.mk: add 4 Variables for compile control.

   # Helix keyboard customize
   # you can edit follows 4 Variables
   #  jp: 以下の4つの変数を必要に応じて編集します。
   OLED_ENABLE = no            # OLED_ENABLE
   LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
   LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
   LED_ANIMATIONS = yes        # LED animations

config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define

* HELIX_ROWS define move from config.h to rules.mk

* add readme.md

* rename readme.md to readme_jp.md

* add readme.md and modify readme_jp.md

* change helix/ssd1306.c for select glcdfont.c position

* add variable LOCAL_GLCDFONT into each keymaps rules.mk

* Add iPhone/iPad LED support to Helix default keymap

* renumber _ADJUST for shrink program size

* Fix Helix i2c wrong bit rate

* add helix serial debug code

* serial debug macro move from config.h to serial.h

* helix serial.c debugging...

* refine debug macros

* add some comments

* add SELECT_SERIAL_SPEED

* add comments

* debugging sync_send/sync_recv

* add very high speed

* fix sync_send/sync_recv

* fix com. start and switch send/recv

* debug mode off

* remove debug codes

* temporary change, compiling C, C++ and ASM without -g

* helix config.h refine

* Revert "temporary change, compiling C, C++ and ASM without -g"

This reverts commit e9730cbbfd94fbcf792d992e3a1a65ad279b24d6.

* add change_reciver2sender()/change_sender2reciver()

This is a change to improve readability.

* txled, rxled off in matrix_init()

* add serial_send_packet() / serial_recive_packet()

This is a change to reduce object size.

* add serial_low() at ISR() top

* add __attribute__((always_inline)) to some functions

* modify serial_send_packet()/serial_recive_packet()

A little, object size reduction.
A little, speedup.

* add debug code to helix/serial.c

* Adjust sampling timing of serial signal being received

* add split_scomm.c/split_scomm.h and change serial.c/serial.h

serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.

* add split_scomm.c/split_scomm.h into helix/rev1

* reduce object size helix/rev2/matrix.c

* remove checksum check, add parity check

* force occur parity error for test

* parity test ok. remove test code

* change some comment & add skip code when buffer_size == 0

* serial.c: multiple types of transaction support

Add 4 bits transaction-type field at packet top.
Select Transaction Descriptor Table entry by transaction-type.

* helix serial master-slave transaction optimize

Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized.

* add debug code for retry

* add comment into each config.h

* fix ISR status drop

* add a debug macro 'debug_retry_chg()'

* reduce led_test size

* remove debug code from helix/serial.c and etc.

* helix:five_rows change TAPPING_TERM value 140

* Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement.

- The difference with the original let's split's serial.c
  - It's high-speed about 4 times.
  - Stable bi-directional data transfer. (Helix need master to slave transfer)
  - serial.h was divided 2 files, serial_config.h and sereial.h
  - With multiple types of transaction support, communication contents can be optimized. (NEW flexible API)

- USE OLD Simple APIs (compatible with let's split serial.c)
  - files :
    - serial_config.h -- hardware configuration (need include by config.h)
    - serial.c/serial.h -- serial communication

- USE NEW flexible APIs. (Support multi-type transaction function.)
  serial.c was divided into 2 layers, split_scom.c and serial.c.
  The upper layer split_scomm.c is called from matrix.c.
  The lower layer serial.c accesses the hardware.
  - files
    - split_scomm.c -- communication buffer is defined in here. call by matrix.c.
    - split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c
    - serial_config.h -- hardware configuration (need include by config.h)
      To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION
    - serial.c/serial.h -- serial communication lower layer

- NEW APIs for serial.c / serial.h (The lower layer)
  // Soft Serial Transaction Descriptor
  typedef struct _SSTD_t  {
      uint8_t *status;
      uint8_t initiator2target_buffer_size;
      uint8_t *initiator2target_buffer;
      uint8_t target2initiator_buffer_size;
      uint8_t *target2initiator_buffer;
  } SSTD_t;

  // initiator is transaction start side
  void soft_serial_initiator_init(SSTD_t *sstd_table);
  // target is interrupt accept side
  void soft_serial_target_init(SSTD_t *sstd_table);
  int soft_serial_transaction(int sstd_index);
  int soft_serial_get_and_clean_target_status(int sstd_index);

- NEW APIs for split_scomm.c / split_scomm.h (The upper layer)
   move from old serial.c the following buffer and functions
     serial_slave_buffer[]
     serial_master_buffer[]
     void serial_master_init(void)
     void serial_slave_init(void)
     int serial_update_buffers(void)
   define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h

* fix comment typo

* Fix the value of helix:five_rows variable HELIX_ROWS to 5.

* led_test rules.mk some change

* Separate common parts of helix/rev2/keymaps/*/rules.mk into helix/rev2/keymaps_common.mk

* helix/rev2/keymaps/edvorakjp/rules.mk use helix/rev2/keymaps_common.mk

* Separate common parts of helix/pico/keymaps/*/rules.mk into helix/pico/keymaps_common.mk

* Helix each keymap's using rgblight mode symbol instead magic number

No change in build result.

* Helix pico keymaps: make rgblight modes selectable.

No change in build result.

* Helix rev2 keymaps: make rgblight modes selectable.

No change in build result.

* fixed Helix froggy/keymap.c: invalid rgblight mode value 0 to 1 (=RGBLIGHT_MODE_STATIC_LIGHT)

* Deselect RGB_TEST and ALTERNATING in Helix rev2,pico keymaps config.h.

* Merge branch 'master' of https://github.com/qmk/qmk_firmware

* revert 955dcbc

* delete keymaps_common.mk

* add LAYOUT_kc() to keyboards/helix/pico/pico.h
2018-12-20 08:55:03 -08:00
Konstantin Đorđević
1904319745 Remove RGB_SMOD alias and replace uses with RGB_MOD (#4319) 2018-11-27 15:34:06 -08:00
Takeshi ISHII
a054b5a06c Fix Helix ws2812.c listed more than once warning. (#4499)
Remove `SRC += ws2812.c` from helix/rev2/rules.mk and helix/pico/rules.mk.
Because it will be added in common_features.mk.
2018-11-27 07:22:47 -08:00
comaid
2b7decbaeb Fix up screen off timer of helix (#4347)
* Fix up screen off timer of helix

* Fix Up ScreenOffInterval exceeded uint16_t

* Fix Up never waking up once screen off if in case of matrix are not dirty

* Changing referenIng incorrect constant name

* OLED_ENABLED => SSD1306OLED

* Improve internal processing of process_record_kb()

* Use the return value of process_record_gfx()

* Move a include statement into #ifdef block

Move   #include "ssd1306.h` statement into #ifdef block

* Move process_record_kbI()

Move process_record_kb() from helix.c to rev1.c/rev2.c/pico.c

* Move process_record_kb()
2018-11-12 12:20:50 -08:00
Drashna Jaelre
7e99d869de Remove all of the deprecated RGB defines
Fixes #3641
2018-10-22 14:55:57 -04:00
Drashna Jaelre
00b6f14821 Replace outdated RGB/Audio information 2018-10-22 14:55:05 -04:00
Takeshi ISHII
4665e4ffff Keyboard: Helix serial.c, split_scom.c bug fix and update (#4191)
* helix/serial.c add support PD1,PD3,PE6 and configuration simplify

* Add comment about ATmega32U4 I2C

* Add compile time check for ATmega32U4 I2C

* change TAB code to 8 SPACE code

* Helix serial.c PORTD,PD0 test. OK

  OK PD0
  -  PD1
  OK PD2
  -  PD3
  -  PE6

* Helix serial.c PORTD,PD1 test. OK

   OK PD0
   OK PD1
   OK PD2
   -  PD3
   -  PE6

* Helix serial.c PORTD,PD3 test. OK

   OK PD0
   OK PD1
   OK PD2
   OK PD3
   -  PE6

* Helix serial.c PORTE,PD6 test. OK

   OK PD0
   OK PD1
   OK PD2
   OK PD3
   OK PE6

* Helix serial.c: PD0,PD1,PD3,PE6 all test end

* Helix serial.c: rename SOFT_SERIAL_PORT to SOFT_SERIAL_PIN

* Helix serial.c add debug code

* Helix serial.c: add transaction ID range check

* Helix serial.c debug code update

* Helix serial.c debug code update

* Helix serial.c: Strict checking of the value of tid.

* adjust the delay of serial.c

* Helix serial.c: remove debug code

* remove EXTRAFLAGS += -DCONSOLE_ENABLE from five_rows/rules.mk

tmk_core/common.mk has
 >ifeq ($(strip $(CONSOLE_ENABLE)), yes)
 >   TMK_COMMON_DEFS += -DCONSOLE_ENABLE

* Fix error handling in split_scomm.c

* add some comment to serial.c

* add some comment about SELECT_SOFT_SERIAL_SPEED
2018-10-22 11:38:05 -07:00
MakotoKurauchi
79bff50247 Keymaps: Helix rgblight mode update (#4091)
* Helix each keymap's using rgblight mode symbol instead magic number

No change in build result.

* Helix pico keymaps: make rgblight modes selectable.

No change in build result.

* Helix rev2 keymaps: make rgblight modes selectable.

No change in build result.

* fixed Helix froggy/keymap.c: invalid rgblight mode value 0 to 1 (=RGBLIGHT_MODE_STATIC_LIGHT)

* Deselect RGB_TEST and ALTERNATING in Helix rev2,pico keymaps config.h.
2018-10-10 12:53:18 -07:00
Joe Wasson
743449472e Make PREVENT_STUCK_MODIFIERS the default (#3107)
* Remove chording as it is not documented, not used, and needs work.

* Make Leader Key an optional feature.

* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`

* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
2018-09-17 13:48:02 -04:00
Biacco42
e5f201edb4 Keymap: Port ergo42/biacco keymap to Helix pico (#3585)
* Port ergo42/biacco keymap to Helix pico

* Fix for review
2018-08-11 13:22:32 -07:00
Takeshi ISHII
b29799f887 Keyboard: fixed build break (size overflow) HelixPico with Backlight or Underglow (#3546)
* build break fix for HelixPico

* add customize variable 'Link_Time_Optimization' into rev2 and pico keymaps rules.mk

* "CFLAGS += -flto" change to "EXTRAFLAGS += -flto"

* add USE_Link_Time_Optimization macro
2018-08-02 14:16:17 -07:00
MakotoKurauchi
07e0558e9a Keyboard: Add HelixPico keyboard (#3502) 2018-07-26 14:26:02 -07:00