Commit Graph

138 Commits

Author SHA1 Message Date
Joel Challis
65150984bd
ARM split - Add uart half duplex transport support (#7987)
* ARM split - Add uart half duplex transport support

* Fix for f103

* initial full duplex pass

* partially remove full duplex

* Correct speeds within driver docs

Co-authored-by: Nick Brassel <nick@tzarc.org>

Co-authored-by: Nick Brassel <nick@tzarc.org>
2020-05-21 18:00:21 +01:00
Nick Brassel
54b04d9665
Add SPI 25xx EEPROM support. (#8780) 2020-05-19 10:34:00 +10:00
Brian Mock
8ca4ed9a98
Fix off by one error with oled_write_raw_P (#9045) 2020-05-10 04:14:07 +01:00
Ryan
16a15c1cfc
QMK-ify some GPIO macros (#8315) 2020-04-30 16:24:47 +10:00
Nick Brassel
b17482c3fd
Add SPI master for ChibiOS/ARM. (#8779) 2020-04-29 14:01:20 +10:00
Nick Brassel
46e4493761
Fix AVR SPI parameter configuration, remove timeouts due to sync protocol. (#8775) 2020-04-13 17:09:50 +10:00
QMK Bot
974f83ec4b format code according to conventions [skip ci] 2020-04-08 01:38:16 +00:00
Ryan
400ca2d035
spi_master for AVR (#8299)
* Change _delay_ms/us() to wait_ms/us()

* Switch to platform-agnostic GPIO macros

* Add AVR spi_master and migrate Adafruit BLE code

* Set verbose back to false

* Add clock divisor, bit order and SPI mode configuration for init

* Add start and stop functions

* Move configuration of mode, endianness and speed to `spi_start()`

* Some breaks here would be good

* Default Adafruit BLE clock divisor to 4 (2MHz on the Feather 32U4)

* Remove mode and divisor enums

* Add some docs

* No hr at EOF

* Add links in sidebar
2020-04-08 11:04:31 +10:00
Joel Challis
31fd0cbc1c
Fix AVR ws2812 when ADDRESS_BASE is non zero (#8646)
* Fix AVR ws2812 when ADDRESS_BASE is non zero

* fix port

* remove unused function defs
2020-04-02 20:46:38 +01:00
Casper Weiss Bang
13fff52f6b
fixed problem with implicit declaration in quantum/rgblight.c (#8406)
* Update tmk_core/common/progmem.h

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update quantum/rgblight.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* fixed problem with implicit declaration in quantum/rgblight.c (#8381)

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-03-28 23:35:11 +00:00
Joel Challis
d96380e654
Initial arm->chibios pass - simplify some platform logic (#8450) 2020-03-21 16:20:04 +11:00
QMK Bot
ece14278ef format code according to conventions [skip ci] 2020-03-17 01:02:01 +00:00
Joel Challis
567bfc97ac
ARM - ADC cleanup (#8385)
* Update switch to array to allow custom values

* Add adc keymap

* update docs to reflect alignment of default 10 bit

* start conversion to USE_ADCVn

* samplerate is hella wrong...stub out for now

* basic f1 and f4 functionality

* Tidy up current changes

* Restore old pinToMux function

* Add back sample rate for supported platforms

* F0 compile fixes

* wordsmithery

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Remove reference to avr only function

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-03-17 00:29:52 +00:00
QMK Bot
60b020acab format code according to conventions [skip ci] 2020-03-14 21:37:29 +00:00
brickbots
b5be96f8bb
Adding OLED scroll setup functions (#8386)
* Adding scroll setup functions:

* Clarifying values stored in oled_scroll_speed
2020-03-14 21:04:34 +00:00
Ryan
d597af9e1e
Remove pro_micro.h (#8374)
* Remove pro_micro.h

* Include quantum.h
2020-03-14 15:31:15 +00:00
Nick Brassel
f2f2afe13b
Add support for STM32L0/L1 onboard EEPROM. (#8002)
* Add support for STM32L0/L1 onboard EEPROM.

* Update docs/eeprom_driver.md

Co-Authored-By: Joel Challis <git@zvecr.com>

Co-authored-by: Joel Challis <git@zvecr.com>
2020-03-12 12:59:55 +11:00
QMK Bot
2b66acf04a format code according to conventions [skip ci] 2020-03-11 05:11:02 +00:00
Drew Mills
5ac6fe1888
Add ADC support for STM32F3 and STM32F0 devices (#7681)
* Add ADC support for STM32F3 and STM32F0 devices

* Add section about configration options available to the ARM ADC implementation

* Fix STM32 typo
2020-03-11 15:38:39 +11:00
QMK Bot
2306c974e5 format code according to conventions [skip ci] 2020-03-07 01:24:47 +00:00
brickbots
833c5ae87a
Buffer based OLED panning, write byte to buffer at arbitrary index (#8055)
* Add buffer based single line pan, arbitrary byte write to buffer

* Change dirty mask to inverse of OLED_BLOCK_TYPE for future proofing larger buffer sizes

* Updating docs to include new functions

* Updating to clarify scroll vs pan
2020-03-07 00:52:39 +00:00
QMK Bot
fd7b52cc64 format code according to conventions [skip ci] 2020-03-06 02:15:29 +00:00
Joel Challis
d0d6fb27c4
Add f401 and f411 blackpill examples (#7930)
* Add f401 and f411 blackpill examples

* Add readme files

* Align dfu args with core

* Add support for RESET keycode

* move STM32_BOOTLOADER_ADDRESS to rules

* Update conf files to latest ChibiOS

* Update conf files to latest ChibiOS
2020-03-06 01:40:39 +00:00
Ryan
c9e3fa6f70
Clean up includes for glcdfont headers (#7745)
* Clean up includes for glcdfont headers

* Remove pragma once, most of these are not headers

* Missed these
2020-03-01 17:56:50 +11:00
Joel Challis
f74c769a19
PWM DMA based RGB Underglow for STM32 (#7928)
* Add pwm ws2812 driver

* Add docs for pwm ws2812 driver

* Update ws2812_pwm for ChibiOS 19

Co-Authored-By: Nick Brassel <nick@tzarc.org>

Co-authored-by: Nick Brassel <nick@tzarc.org>
2020-03-01 13:05:56 +11:00
Nick Brassel
d0c3acbe3e
Allow for ChibiOS 20.x (master), as well as enabling ChibiOS-Contrib HAL. (#8272) 2020-03-01 11:50:49 +11:00
James Young
26eef35f07
2020 February 29 Breaking Changes Update (#8064) 2020-02-29 11:59:30 -08:00
Nick Brassel
716c29881c
Rollback PR #7967 in preference of fixing I2C start/stop properly, in a followup PR. (#8173) 2020-02-24 10:08:00 +11:00
QMK Bot
1327208449 format code according to conventions [skip ci] 2020-02-22 03:41:27 +00:00
Nick Winans
d99404388f
Fix QWIIC OLED for AVR (#7769)
* Fix QWIIC OLED for AVR

* Change missed width * width to width * height

* Fix typo in comment

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Fix last incorrect uses of LCDWIDTH

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-02-22 14:11:25 +11:00
QMK Bot
31aadc8725 format code according to conventions [skip ci] 2020-02-13 20:09:39 +00:00
Joel Challis
014ad1d747
Fix RESET keycode on some STM32F072 keyboards (#8134)
* Add f072 board files with 'enter_bootloader_mode_if_requested' support

* rename default f072 board file to GENERIC_STM32_F072XB

* Remove board files

* Add bootloader def

* Update generic f072 board paths

* Revert wrong deletion
2020-02-13 19:39:22 +00:00
Ted M Lin
9456832a3b
Fix out of bound OLED font access (#8145)
* Fix out of bound OLED font access

The default font is 1344 bytes, or a total of 224 glyphs (each 6-bytes wide).
OLED_FONT_END defaults to 224, which if used will then index off the end of
the font array. So either the documentation or code is wrong.

Instead of figuring out the rewording of the documentation, just change
the OLED_FONT_END default value to 223, to match the documentation and code.

* Add static assert to check array size

Build bomb if the font array size doesn't match to the defines.
2020-02-11 21:38:20 +00:00
Nick Brassel
8e550fc11a Add thread safety around i2c_master for ChibiOS/ARM. 2020-02-01 17:44:39 +11:00
Joel Challis
7342c335d2
Refactor stm32duino f103 keyboards to use new central board config files (#7706)
* Create central board for bluepill

* Remove duplicate board files

* Refactor to use new central board config files

* Fix cannonkeys f103 boards
2020-01-27 22:39:30 +00:00
Joel Challis
50855593ff
Migrate common ld scripts to common location (#7887)
* Migrate common ld scripts to common location

* Remove duplicate ld scripts

* Update build to look at common ld location
2020-01-27 22:38:55 +00:00
zvecr
d3abebb601 Create central board for bluepill 2020-01-26 23:33:03 +00:00
Joel Challis
e4a0f841e1
Update split serial code to use driver pattern (#7990)
* Move avr serial code to drivers

* Update src+= serial.c to driver pattern
2020-01-24 13:50:51 +00:00
QMK Bot
fe50883c15 format code according to conventions [skip ci] 2020-01-24 02:15:29 +00:00
Nick Brassel
d13ada1162 Add customisable EEPROM driver selection (#7274)
- uprintf -> dprintf
- Fix atsam "vendor" eeprom.
- Bump Kinetis K20x to 64 bytes, too.
- Rollback Kinetis to 32 bytes as partitioning can only be done once. Add warning about changing the value.
- Change RAM-backed "fake" EEPROM implementations to match eeconfig's current usage.
- Add 24LC128 by request.
2020-01-24 12:45:58 +11:00
Joel Challis
667045b492
Run clang-format manually to fix recently changed files (#7934)
* Run clang-format manually to fix recently changed files

* Run clang-format manually to fix recently changed files - revert template files

* Run clang-format manually to fix recently changed files - format off for ascii_to_keycode_lut
2020-01-19 16:30:34 +00:00
Joel Challis
680ebef086
SPI DMA based RGB Underglow for STM32 (#7674)
* Initial stash of ws2812 spi driver

* Update comment, add sync backup plan

* Add testing notes to spi ws2812 driver

* Align RGBW error messages
2019-12-31 17:26:40 +00:00
fauxpark
8af1501328 Clean up ISSI driver includes (#7734)
* Clean up ISSI driver includes

* Missed an endif
2019-12-29 10:21:58 -08:00
zvecr
9aedb620c5 Add backwards compatibility for oled_write_raw_P on ARM 2019-12-24 20:13:27 -08:00
Drashna Jaelre
7066164591 Completely remove i2c_transmit_receive function (#7686)
* Add i2c_transmit_receive function

This function is listed in the ARM header file, but doesn't actually exist.

* Remove i2c_transmit_receive function

* Update DRV2605L read function to use i2c_readReg on both arm and avr
2019-12-22 13:50:08 +00:00
Joel Challis
376419a4f7
Add central location for ChibiOS defines (#7542)
* Add central location for chibios defines

* Add central location for chibios defines - actually add files this time....

* Add Copyright header

* Update include order to resolve i2cv1 build errors
2019-12-21 18:22:49 +00:00
yulei
a037cedfdc fixed I2C driver support for stm32f4 (#7526)
* correct i2c driver for stm32f4

* update pin mode definitions

* update macro definition
2019-12-12 17:20:04 -08:00
Joel Challis
b3c7864990 Enable bitbang ws2812 for f4 (#7571) 2019-12-08 21:19:58 -08:00
fauxpark
a8320f20f7
Improve support and docs for ADC driver (#7191)
* Improve support and docs for ADC driver

* Comment ADC channels

* Move to Makers and Modders section, and fix usage instructions

* Flesh out intro

* Superscript 328P note

* Fix pin_to_mux LUT

* Support USB64/1287 as well

* analogReadPin() defaults to 0V mux on invalid pin

* Update pinToMux() function documentation

* Dot

* Accept (some of) the `qmk cformat` changes

* Do clang-format properly

* More wording tweaks

* Link to encoder docs
2019-12-08 12:11:29 +11:00
Joel Challis
1718dfa658
Increase matrix scanning speed on xd84 (#7517)
* Increase matrix scanning speed

* Fix func name in failure output
2019-12-03 19:39:21 +00:00