Commit Graph

39 Commits

Author SHA1 Message Date
Ryan
4791cfae1a
Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
Ryan
7eea780a7d
Remove bootloader listings from rules.mk (#14330) 2021-09-10 13:35:46 +10:00
Ryan
8574bf20d3
Remove more cruft in keyboard files (#14288) 2021-09-03 17:09:30 +01:00
Xelus22
4e1c5887c5
[Core] Refactor OLED to allow easy addition of other types (#13454)
* add docs

* core changes

* update keyboards to new OLED

* updated users to new OLED

* update layouts to new OLED

* fixup docs

* drashna's suggestion

* fix up docs

* new keyboards with oled

* core split changes

* remaining keyboard files

* Fix The Helix keyboards oled options

* reflect develop

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
2021-08-24 16:28:26 +10:00
Joel Challis
c0628c2820
Remove backwards compatibility of debounce names (#13877)
* Remove backwards compatibility of debounce names

* Update docs

* Update keyboards/keymaps
2021-08-09 19:46:18 +01:00
James Young
a03aa301de
Remove Full Bootmagic (#13846)
* disambiguate Bootmagic rules in keymaps

The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.

This commit edits the files to specify that full Bootmagic is intended.

* remove BOOTMAGIC_ENABLE=full setting

* unify commented BOOTMAGIC_ENABLE rules in keyboards

Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no       # Virtual DIP switch configuration;g' {} +
```

* remove commented Bootmagic rules from keymap/user level

Command:

```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```

* update keyboard BOOTMAGIC_ENABLE rule formatting

Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```

* update keyboards' BOOTMAGIC_ENABLE settings

Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```

* update keymap/user BOOTMAGIC_ENABLE settings

Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```

* remove and replace inline comments in keyboards and keymap/user files

Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1     # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1      # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1       # Enable Bootmagic Lite;g' '{}' +
```

* rename improperly named makefiles

Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.

This commit corrects the filenames of the affected files.

* update renamed file with new rule formatting

* update QMK's template files

Updates QMK's `rules.mk` templates to use the new inline comment.

* update QMK Docs

- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes

* rules.mk patch for coarse/ixora and coarse/vinta
2021-08-06 23:59:56 -07:00
Drashna Jaelre
eb46c954dc
[Keymap] Drashna's Defaults cleanup (#13722) 2021-07-26 17:59:49 -07:00
Manna Harbour
65f8da3034
[Keymap] Update Miryoku (#13307)
Fix reddit link

Duplicate open parenthesis next to close parenthesis on NSSL

Add customisation instructions

Add lily58

Add gergo
Co-authored-by: Jonathan Dayton <jonathandayton23@gmail.com>

Clean up LAYOUT macro formatting

Add alternative vi-style navigation layout

Add kyria

Add minidox

Change order of keyboards

Add iris

Expand TOC

Re-order userspace subheadings

Add atreus

Add customisation section

Add split_3x5_3 and split_3x6_3 layouts

Add for_science

Fix wrong paths in keyboard config.h and keymap.c headings

Fix keyboard ordering

Fix blank lines around headings

Add compatibility with new org-mode version.

Remove keyboards/crkbd now covered by layouts/split_3x6_3

Add Halmak

Alphabetise alternative alpha arrangements

Move build options out of base layer alphas headings

Add list of keyboards supporting split_3x5_3 layout

Enable Auto Shift and Retro Shift

Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping)

Change kyria thumb key mapping

Add planck_mit layout

Remove alternative bottom row support from ortho_4x12

Remove minidox
 - Covered by split_3x5_3 layout

Add moonlander

Remove KC_ macros

Add 60_ansi layout

Add ortho_5x15 layout
Closes manna-harbour/qmk_firmware#5
Co-authored-by: Rob <rob@debank.tv>

Fix typo (manna-harbour/qmk_firmware#7)
Author: sonnius <sonnius@users.noreply.github.com>

Add redox_w (manna-harbour/qmk_firmware#8)
Author: Brian Romanko <hello@bromanko.com>
Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com>

Add AUTO_SHIFT_NO_SETUP to reduce firmware size

Update image paths

Add instructions to checkout development branch

Add kyria extended thumbs option, change default, add KLE

Change clipboard keys
 - Change order to be mirror of windows bindings
 - Change default to use CUA bindings for Cut, Copy, and Paste, and Fun Cluster
bindings for Undo and Redo
 - Add alternative bindings
   - Fun Cluster (original miryoku bindings)
   - Mac
   - Windows
 - Change prefix for local macros from X_ to U_

Disable Retro Shift, enable Auto Shift for non-alphas

Revert "Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping)"

Add Experimental Features section

Update miryoku image link

Update cover image link

Add dactyl_manuform/4x5

Add cutomisation examples

Add https to remote example

Fix dactyl_manuform/4x5 subset mapping

Add extended thumbs to ortho_4x12

Update Colemak Mod-DH naming
Closes manna-harbour/qmk_firmware#13

Add dactyl_manuform/5x6
Resolves manna-harbour/qmk_firmware#14
Co-authored-by: Sebastian Morales <sebastian.moralesd@gmail.com>

Add note on FORCE_LAYOUT
 - Needed to use EXTENDED_THUMBS on planck

Add parent directories to keyboard headings and re-order

Add keyboardio/atreus
Resolves manna-harbour/qmk_firmware#15

Add torn
Resolves manna-harbour/qmk_firmware#16
Author: Brian Romanko <hello@bromanko.com>
Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com>

Change map to zip
 - Adds support for python3, still compatible with python2.
Resolves manna-harbour/qmk_firmware#10
Resolves manna-harbour/qmk_firmware#19
Co-authored-by: Ori <ori@oribarbut.com>

Add python-version

Add sofle

Add ergotravel

Add ortho_5x12

Add ortho_4x10

Add :main no header argument to C code blocks
resolves manna-harbour/qmk_firmware#11
resolves manna-harbour/qmk_firmware#12
Co-authored-by: RubioJr9 <u0893472@utah.edu>

Add flipped layers and inverted-T nav alternative layouts
 - Separate tap_table into alphas_table and thumbs_table
 - Add mode argument to table-layout-half
 - Remove layer_name
 - Rename layers
 - Add mods and clipboard to MBO and mirror
 - Add MIRYOKU_LAYERS=FLIP
 - Add MIRYOKU_NAV=INVERTEDT

Add layer diagrams

Update contact section

Update links for Bilateral Combinations and Retro Shift

Add description and no reverse angle option to 60_ansi layout

Update list of keyboards supporting community layouts
 - and example build command lines

Change moonlander thumb keys

Update list of keyboards supporting split_3x5_3

Add license to tangled C source files
2021-07-03 09:09:02 -07:00
James Young
1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
Drashna Jael're
146b042514
Merge remote-tracking branch 'origin/master' into develop 2021-02-23 13:57:26 -08:00
Drashna Jaelre
0b69e4df81
[Keymap] Drashna Updates - Split+OLED edition (#11968) 2021-02-23 10:57:24 -08:00
Joel Challis
f5a38b95c1
Remove legacy print backward compatiblitly (#11805)
* Remove legacy print backward compatiblitly

* Remove legacy print backward compatiblitly - core

* revert comment changes
2021-02-06 16:56:13 +00:00
Ryan
cc3f2e2865
Remove DESCRIPTION, E-G (#11574) 2021-01-18 12:49:25 +11:00
Jane Bernhardt
581368596e name change 2021-01-07 13:23:31 -05:00
Joel Challis
a9f7d4dccc
Various compilation fixes for avr-gcc 10 (#9269) 2020-12-18 17:28:29 +00:00
Drashna Jaelre
855dd2d218
[Keymap] Drashna Code Cleanup (#10656)
* Add Launchpad keymap

Note: RGB and Audio won't work when using B pins for audio

* Add support for rgb matrix on launchpad

* Update config for launchpag

* Disable wait on layer change

* Update config for ErgoDox EZ

* Fixup rgb light userspace code

* Move Corne layout to community layouts folder

* Update config for corne to support community layouts

* Add license header to files

* Minor cleanup of userspace config

* Update Pimironi Trackball code

* Increase debounce time on ergodox

* Fix keymap handling

* Enable wait for USB for moonlander

* Update/add license headers

* fix review issues
2020-10-17 11:46:57 -07:00
AbstractKB
e55d55edc0
[Keymap] added my gergo keymap (#8476)
* added my gergo keymap

* updated personal bfo9000 keymap

* fixed redundancy, extended debounce time
2020-05-18 03:29:01 -07:00
Gautham Yerroju
7e6b550ebf
Add a simple custom keymap for Gergo. (#8662)
* Add a simple custom keymap for Gergo.

* update readme, keymap cleanup
2020-04-13 07:37:23 +02:00
Ryan
c9e3fa6f70
Clean up includes for glcdfont headers (#7745)
* Clean up includes for glcdfont headers

* Remove pragma once, most of these are not headers

* Missed these
2020-03-01 17:56:50 +11:00
ridingqwerty
0f7d294ac3
Remove filesize changes from default-ish rules.mk files, sans handwired (#8040) 2020-01-30 13:47:48 -05:00
Drashna Jaelre
eb91c96288
[Keymap] All about (ARM) RGB and OLEDs (drashna keymaps) (#7354)
* Add Kyria Keymap

* Enable all RGBLIGHT Animations for ARM and high capacity AVR

* Reduce GNUC version for __has_include

* Cleanup Ortho 4x12 Community layout

* Update Collide 39 keymap

* Cleanup Keymaps

* Enable full 30 LEDs for Ergodox

* Change EEPROM Load timing

* Use RGB Matrix on Planck Rev6

* Use correct keymap swap

* Enable everything for ARM

* Only enable rgb sleep on avr until crash is fixed

* Add additional Kyria keymap config

* Overhaul Kyria OLED display

* Improve kyria keymap based on usage

* Minor tweaks to rules

* Update OLED code to truncate properly

* Fix RGB Light layer indication

* Switch all of biton32 to get_highest_layer function

* Fix OLED Keylogger display

* Run qmk cformat over all of my user files

* Slight tweak to kyria based on usage

* Move around LALT_T config

* Add comments about base wrappers to keymaps

* Another cformat pass

* Temp fix for VUSB boards and NKRO

* Convert tabs to spaces in rules.mk files

* Only enable RGBLight if it's enabled

* Add Encoder Flip setting

* Update OLED font file
2019-11-20 12:37:24 -08:00
Joel Challis
cc5edb9eeb
Port DEBUG_MATRIX_SCAN_RATE to core (#7029)
* Port DEBUG_MATRIX_SCAN_RATE to core

* Remove duplicate DEBUG_MATRIX_SCAN_RATE implementations

* Remove duplicate DEBUG_MATRIX_SCAN_RATE implementation from handwired/xealous

* Add console logic from ergodox_ez
2019-10-15 13:32:52 +01:00
fauxpark
2e7cd98c06 Cleanup rules.mk for 32U4 keyboards, G (#6971)
* Cleanup rules.mk for 32U4 keyboards, G

* Update keyboards/gray_studio/cod67/rules.mk
2019-10-12 23:57:57 +01:00
Drashna Jaelre
e88f80a891
[Keymap] Big Drashna code update (#6639)
* Add a quefrency keymap

* New Alt-ernate layouts

* Enable Per Key Tapping Term to preserve sanity

* Use underglow and mod lights for status on Corne

* Update the drashna_ms keymap for quefrency

* Disable Audio since there isn't enough space

* Update KC_MAKE to ues :flash target

* Cleanup ergodox layout

* Enable i2c support for Iris

* Add keymap support for CG_SWAP

* Enable RGB Matrix Shutdown mode

* enable heatmap

* Update gitlab CI to install python3

* Remove game macros

These are no longer needed, and haven't been used in ages

* Cleanup planck layout

* Add RGB Matrix fun and RGB cleanup

* Add keycode and config for RGB Matrix idle animations

* Clean up rgb idle animation code

* Add rgb idle keycode to keymaps

* Fix issues with rgb matrix idle animation

* Fix some handling for idle animation

* Reduce idle animation timeout to 15s to be more reasonable

* fix up rgb stuff

* Fix isses with rgb functions not being called for matrix

* Use custom EEPROM Magic Number so testing is easier

* Extend Default Layer macro to support a lot more layers

* Fix bjohnson macropad

* Adjust KC_MAKE to process mods for more consistent behavior

* Fix up rgb stuff on corne

* Corne OLED Overhaul

* Fixes a number of issues with weirdness.
* Fixes issues with keylogger (should be more reliable now)
* Modulaize the OLED render sections
* Rewrite layer display code
* Update URL for Font Editor

Due to odd issues, I ended up rewriting from scratch.  And using PROGMEM versions, since I think I was getting memory overflows.

* Update polling rate on all keebs

* Fix planck ez layout config

* Remove macros from Viterbi
2019-09-07 08:57:30 -07:00
Jeremy Bernhardt
07bdc8f4b7 [Keyboard] Added little fixes and bootmagic for gBoard keebs (#6477)
* Added little fixes and bootmagic

* Update keyboards/gergo/keymaps/oled/rules.mk

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* whacked out quantum_libs
2019-08-06 10:20:48 -07:00
Drashna Jaelre
d41961c9ed [Keymap] Drashna's Feature madness (#6128)
* Fix my Tap Dance issues after I broke them

* Cleanup and organization of userspace documentation

As well as some additional cleanup of functions due to review of documentation.

* Enable Tapdance on Glow and remove more animations

* Revert to Eager PR debouncing

* Add better check for startup animation

* Move where RGB Matrix defines are listed

* Limit RGB Matrix max val

* Update keyboard for Iris Rev 3 conflicts

* Enable encoder support on planck ez

* Remove is_master check from corne\'s OLED code

* Overhaul OLED screens for my Corne

* One last removal

* Show RGB valu On both sides

* Updates for OLED display info

* Fix compile issues for rgb config

* Disabled Space Cadet for all drashna keymaps

* Fix OLED Screen configs

* Minor OLED Tweaks

* Revert some Iris changes

* Fix song include

* Handle MAKE macro for the Corne boards better

* Add super hacky-hack for eeconfig initialization

* Add audio support for Fractal since Elite Cs support it

* Add defines for keycode steps

* Add White layout

* Update Corne RGB info

* Add fun effects to layer indication for RGB Matrix enabled boards

* Use proper define for product name detection

* Update formatting

* Use custom timeout mechanism for OLED timeout

* Fix up OLED screen HSV code for new HSV structure

* Better handle turning off RGB Matrix when sleeping

* Disable MultiSplash Animation

* Change Iris back to using serial

* Why was RGB disabled?!?!?!

* Limit val in rgb_matrix_layer_helper function

* Remove EECONFIG setting for RGB matrix
2019-07-22 20:22:33 -07:00
Erez Zukerman
8680c50d07 Removes Erez personally from QMK (#5883) 2019-05-15 19:53:45 -04:00
Drashna Jaelre
f3d5b1091d [Keymap] RGB Changes for Drashna Keyboards (#5803)
* Disable a bunch of reactive modes

* Enable rgb matrix for Corne Keyboard

* Convert CRKBD to rgb matrix

* Add Gergo keyboard layout

* Make Diablo 3 tap dance better

* Add basic support for Planck EZ

* Fix RGB Matrix stuff

* Fix keycodes for Planck EZ

* Update CRKBD OLED stuff

* Fix typo for sleep on ergodox glow

* Improve my gergo layout

* Scrolling OLED key logger!

* Change gergo layout

* Hnadle unicode keycodes if unicode is disabled

* Disable COMMAND/CONSOLE for gergo

* Fix right side control

* Re-enable LTO for all platforms

Since I got updated arm gcc binaries that no longer error out on lto

* Update formatting to match newer community standards

Poor 2 space

* Re-alight startup animation to use new HUE range

* Streamline gitlab ci scripts

* Disabled Space Cadet

* Add support for breathing table

* Enable new LTO Option

And clean up defines that will now be repeatitive

* Remove vscode settings

* Additional formatting cleanup of config.h files
2019-05-06 22:34:09 -07:00
Jeremy Bernhardt
507805cd10 [Keyboard] Fixing drag-and-drop (#5728)
* Fixing drag-and-drop

* Forgot to rtfm and do a full build. Added colemak

* What
2019-04-29 17:29:00 -07:00
Drashna Jaelre
8faee5c9f6 [Keyboard] Update Gergo to use newer Ergodox Matrix code (#5703)
* [Keyboard] Update Gergo to use newer Ergodox Matrix code

And update layout macros to be correct

* Almost forgot the json file

* Remove board specific defines for i2c timeout
2019-04-26 17:24:00 -07:00
Drashna Jaelre
66dbcccb48
Fix incorrect keyboard dimensions in Configurator API data (#5615)
* Fix Ergodone keyboard dimensions in info.json

* Fix handwired/prime_exl keyboard dimensions in info.json

* Fix KBDfans KBD4x keyboard dimensions in info.json

* Fix handwired/not_so_minidox keyboard dimensions in info.json

* Fix Canoe keyboard dimensions in info.json

* Fix Clueboard Cluecard keyboard dimensions in info.json

* Fix Corne (crkbd) keyboard dimensions in info.json

* Fix Gergo keyboard dimensions in info.json

* Fix handwired/frenchdev keyboard dimensions in info.json

* Fix handwired/ortho5x13 keyboard dimensions in info.json

* Fix handwired/promethium keyboard dimensions in info.json

* Fix Speedo keyboard dimensions in info.json

* Fix XD87 keyboard dimensions in info.json

* Fix Ergodox EZ keyboard dimensions in info.json

* Fix Ergodox Infinity keyboard dimensions in info.json

* Fix Keeb.io Iris keyboard dimensions in info.json

* Fix Orthodox keyboard dimensions in info.json (all revisions)

* Fix Qwertyydox keyboard dimensions in info.json

* Fix handwired/tradestation keyboard dimensions in info.json
2019-04-14 11:33:52 -07:00
Jeremy Bernhardt
61a7aebd16 [Keyboard] Georgi FW updates (#5609)
* Working on chording

* Working on chording

* Got layouts in order

* Initial Georgi support

* forgot to add keymaps

* Updated readme

* Update keyboards/georgi/keymaps/template/readme.md

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/georgi/georgi.h

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/georgi/keymaps/default/keymap.c

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/georgi/keymaps/default/keymap.c

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/georgi/rules.mk

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/georgi/rules.mk

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/georgi/matrix.c

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/georgi/georgi.c

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/georgi/georgi.c

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/georgi/rules.mk

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/georgi/keymaps/default/keymap.c

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/georgi/keymaps/template/keymap.c

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/georgi/matrix.c

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Disabled features, updated info

* Update keyboards/georgi/config.h

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/georgi/config.h

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Fixed info.json

* Split the number button and fixed gaming mode.

* started work on history feature

* Working history/multikeyfuckery

* type

* inital code reduction refactor

* Got multikey patched up, optimizing for size

* Forgot to remove stuff

* fixed key repeat

* Key repeat added.

* Symshift locking

* Midchord Sym shenanigans.

* Added only QWERTY mode

* Split out header

* Added stickybits, minimal layour

* Fixing user layout

* Whitespace fixing

* Fixing Version name
2019-04-14 11:01:52 -07:00
noroadsleft
de6b568177
Fix Gergo keyboard dimensions in info.json 2019-04-13 01:27:39 -07:00
James Churchill
37932c293c Next set of split_common changes (#4974)
* Update split_common to use standard i2c drivers

* Eliminate RGB_DIRTY/BACKLIT_DIRTY

* Fix avr i2c_master error handling

* Fix i2c_slave addressing

* Remove unneeded timeout on i2c_stop()

* Fix RGB I2C transfers

* Remove incorrect comment
2019-03-12 10:23:28 -07:00
Jeremy Bernhardt
045400ab28 Update gergo.h
Did a big brane move and mixed those up. Been using this keyboard for weeks and never noticed.
2019-02-05 22:16:41 -08:00
Fang
fd9967dd8e Add hand-swap config to Gergo layout (#5033) 2019-02-01 18:48:40 -08:00
Konstantin Đorđević
4d9b11af14 Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955)
* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4

* Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions

* Update docs to use get_mods() instead of keyboard_report->mods

* Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test

For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist

* Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)
2019-01-27 00:28:40 -08:00
noroadsleft
87b277c21a [Keyboard] Fix layout macro name for Gergo info.json (#4828)
Layout macro name in info.json was named LAYOUT instead of LAYOUT_GERGO as it is in gergo.h.
2019-01-12 00:06:41 -08:00
Jeremy Bernhardt
d8eace35eb [Keyboard] Adding support for Gergo (#4792)
* Commited into clean repo

* Gergo initial release

* Cleaning up

* Cleaning up

* Update readme.md

* Updated image, fixed MD formatting, added clairity

* Moved keymap to keyboard subdir, modified rules.mk

* Cleaned header guards

* Cleaned header guards. Read the rest of the PR comments

* Update keyboards/gergo/keymaps/default/keymap.c

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keyboards/gergo/readme.md

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Moved makefiles to keymap mod-area-thingy-with-overrides

* Update rules.mk

Slow the roll on the defaults while I wait for merge

* Update rules.mk

* Cleaning cleaning cleaning

* More housekeeping. Keeping optdefs

* moved keyboard specfic conf to config.h. Can we merge yet?

* added info.json
2019-01-11 17:44:06 -08:00