Commit Graph

3 Commits

Author SHA1 Message Date
James Young
a03aa301de
Remove Full Bootmagic (#13846)
* disambiguate Bootmagic rules in keymaps

The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.

This commit edits the files to specify that full Bootmagic is intended.

* remove BOOTMAGIC_ENABLE=full setting

* unify commented BOOTMAGIC_ENABLE rules in keyboards

Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no       # Virtual DIP switch configuration;g' {} +
```

* remove commented Bootmagic rules from keymap/user level

Command:

```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```

* update keyboard BOOTMAGIC_ENABLE rule formatting

Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```

* update keyboards' BOOTMAGIC_ENABLE settings

Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```

* update keymap/user BOOTMAGIC_ENABLE settings

Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```

* remove and replace inline comments in keyboards and keymap/user files

Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1     # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1      # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1       # Enable Bootmagic Lite;g' '{}' +
```

* rename improperly named makefiles

Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.

This commit corrects the filenames of the affected files.

* update renamed file with new rule formatting

* update QMK's template files

Updates QMK's `rules.mk` templates to use the new inline comment.

* update QMK Docs

- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes

* rules.mk patch for coarse/ixora and coarse/vinta
2021-08-06 23:59:56 -07:00
CMMS-Freather
4c4b4b6e0d
[Keyboard] add sam's sg81m keyboard (#11624)
* new repo: create cmm.studio folder, add saka qmk firmware

new folder for cmm.studio line up keyboard
added saka68 keyboard qmk and via firmware support

* Update keyboards/cmm.studio/saka68/config.h

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/cmm.studio/saka68/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/cmm.studio/saka68/keymaps/via/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/cmm.studio/saka68/config.h

Co-authored-by: Ryan <fauxpark@gmail.com>

* fix on keymap, readme

fix on keymap, readme

* Update keyboards/cmm.studio/saka68/readme.md

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/cmm.studio/saka68/keymaps/default/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* update vendor name with _ instead of .

update vendor name with _ instead of .

* Update readme.md

change the make format

* Update keyboards/cmm_studio/saka68/keymaps/default/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* deleted some files from cmm.studio, changes to cmm_studio

deleted some files from cmm.studio, changes to cmm_studio

* Update readme.md

make command changed

* Update keyboards/cmm_studio/saka68/readme.md

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update readme.md

added pic for pcb

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update keyboards/cmm_studio/saka68/config.h

tested and does work now. deleting these lines

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update keyboards/cmm_studio/saka68/readme.md

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update readme.md

added use physical reset button instruction

* change to the cmm saka folder

making the changes to cmm saka firmware

seperated solder version firmware and hotswap version firmware

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* change to the cmm saka hotswap folder

* add sam's sg81m keyboard

add sam's sg81m keyboard firmware

* Update keymap.c

* Update keymap.c

* update keymap

update default keymap and via keymap

* Update keymap.c

* Update keymap.c

* Update keymap.c

* Update keyboards/sam/sg81m/sg81m.c

Co-authored-by: Joel Challis <git@zvecr.com>

* Update config.h

* Update config.h

Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
2021-01-29 20:09:11 -08:00
CMMS-Freather
677789df77
change to cmm.studio saka68 folder. split to solder and hotswap, add hotswap fimware (#11443)
* new repo: create cmm.studio folder, add saka qmk firmware

new folder for cmm.studio line up keyboard
added saka68 keyboard qmk and via firmware support

* Update keyboards/cmm.studio/saka68/config.h

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/cmm.studio/saka68/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/cmm.studio/saka68/keymaps/via/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/cmm.studio/saka68/config.h

Co-authored-by: Ryan <fauxpark@gmail.com>

* fix on keymap, readme

fix on keymap, readme

* Update keyboards/cmm.studio/saka68/readme.md

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/cmm.studio/saka68/keymaps/default/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* update vendor name with _ instead of .

update vendor name with _ instead of .

* Update readme.md

change the make format

* Update keyboards/cmm_studio/saka68/keymaps/default/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* deleted some files from cmm.studio, changes to cmm_studio

deleted some files from cmm.studio, changes to cmm_studio

* Update readme.md

make command changed

* Update keyboards/cmm_studio/saka68/readme.md

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update readme.md

added pic for pcb

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update keyboards/cmm_studio/saka68/config.h

tested and does work now. deleting these lines

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update keyboards/cmm_studio/saka68/readme.md

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update readme.md

added use physical reset button instruction

* change to the cmm saka folder

making the changes to cmm saka firmware

seperated solder version firmware and hotswap version firmware

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* change to the cmm saka hotswap folder

Co-authored-by: Ryan <fauxpark@gmail.com>
2021-01-19 13:23:13 +11:00