Commit Graph

32 Commits

Author SHA1 Message Date
QMK Bot
63646e8906
Format code according to conventions (#16322) 2022-02-12 18:29:31 +00:00
Stefan Kerkmann
be59e8af2b
Deprecate split transactions status field (#16023) 2022-01-26 21:13:27 -08:00
Joakim Tufvegren
0ae20e7457
Make solo half of split keyboards (more) usable. (#13523)
* Make solo half of split keyboards (more) usable.

Using only one half of a split keyboard (that's using the split_common
framework to communicate) is not a great experience, since several read
timeouts per scan cycle cause an unusably slow scan rate.

This change blocks all split communication attempts for 500 ms
(configurable) after an error occurs, causing the scan rate to become at
least _more_ usable, but might need some tweaking to work fully on most
keyboards. One read timeout still needs to occur after the 500 ms has
passed, and if that timeout isn't low enough, some scan cycles may still
be too slow.

* Fix lint complaint.

* Require 25 consecutive comm errors to see comms as disconnected.

The number of max errors can be overridden by defining
`SPLIT_MAX_CONNECTION_ERRORS`.

* Add comments to new defines, and ability to disable disconnection check.

Also increase `SPLIT_MAX_CONNECTION_ERRORS` to 40, since it's divisible
by most relevant numbers for the description.

* Make lint happy ...again

* Only update `connection_check_timer` when needed.

* Add new defines to split keyboard documentation.

* Move connection timeout logic to transport.c, add `is_transport_connected`.

* Use split_common disconnection logic in matrix.c.

Instead of doing more or less the same thing twice.

* Move disconnection logic to `transport_master`.

Is a cleaner implementation, and causes the scan rate while disconnected
to increase instead of decrease.

* Lint fixes.

* Lower default `SERIAL_USART_TIMEOUT` to 20 ms.

The read timeout must be low enough to not cause exessively long scan
cycles when using a solo split half. 10 ms was determined from testing
to work fine even with the slowest defined baudrate of 19200 (5 ms was
too low for that case), so 20 ms should be fine for most cases.

* Remove `SERIAL_USART_TIMEOUT` from ergodox_infinity/config.h

Was somewhat mistakenly included in an earlier PR.

* Fix building with `USE_I2C`.

* Reduce built firmware size.

Not really sure why this works, the idea was taken from tzarc's work on
split disconnection.

* Tweak and improve opt-out for split disconnection logic.

There are now two ways to opt out from this feature:
* Set `SPLIT_MAX_CONNECTION_ERRORS` to 0. This will completely disable
  the connection status checks (also affects the slave matrix reset logic in
  matrix.c, though).
* Set `SPLIT_CONNECTION_CHECK_TIMEOUT` to 0. This will only disable the
  communication throttling while disconnected. Will make the firmware
  smaller.

* Make split disconnection logic work with custom transports.

Includes a fallback implementation for keyboards using a custom
split_util.c but not a custom matrix.c (currently no such keyboard seems
to be merged, though).

* Remove unnecessary include of timer.h

Co-authored-by: Joel Challis <git@zvecr.com>

Co-authored-by: Joel Challis <git@zvecr.com>
2021-08-22 10:51:17 +10:00
Nick Brassel
172e6a7030
Extensible split data sync (#11930)
* Extensible split data sync capability through transactions.

- Split common transport has been split up between the transport layer
  and data layer.
- Split "transactions" model used, with convergence between I2C and
  serial data definitions.
- Slave matrix "generation count" is used to determine if the full slave
  matrix needs to be retrieved.
- Encoders get the same "generation count" treatment.
- All other blocks of data are synchronised when a change is detected.
- All transmissions have a globally-configurable deadline before a
  transmission is forced (`FORCED_SYNC_THROTTLE_MS`, default 100ms).
- Added atomicity for all core-synced data, preventing partial updates
- Added retries to AVR i2c_master's i2c_start, to minimise the number of
  failed transactions when interrupts are disabled on the slave due to
  atomicity checks.
- Some keyboards have had slight modifications made in order to ensure
  that they still build due to firmware size restrictions.

* Fixup LED_MATRIX compile.

* Parameterise ERROR_DISCONNECT_COUNT.
2021-06-18 09:10:06 +10:00
James Young
7d1194de01
run: qmk cformat --core-only 2021-05-29 13:53:10 -07:00
Joakim Tufvegren
cbdc3fb81b
Fix spelling mistake regarding LED Matrix in split_common. (#12888) 2021-05-14 03:37:24 +10:00
github-actions[bot]
f5b6bef4b3
[CI] Format code according to conventions (#12772)
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-05-02 05:15:50 +10:00
XScorpion2
3c2e69af79
Fixing transport's led/rgb matrix suspend state logic (#12770) 2021-05-01 12:14:17 -07:00
github-actions[bot]
15ff1927db
[CI] Format code according to conventions (#12650)
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-04-22 19:26:17 +10:00
Ryan
d6ab908272
LED Matrix: Split (#12633) 2021-04-22 19:21:13 +10:00
github-actions[bot]
d950b97115
Format code according to conventions (#12088)
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-03-03 07:54:11 +11:00
XScorpion2
cde2859a65
Split RGB Matrix (#11055)
* Split RGB Matrix

* Suspend State sync for rgb matrix
2021-03-03 07:32:15 +11:00
github-actions[bot]
b0e161e33d
Format code according to conventions (#11928)
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-02-16 11:33:03 +11:00
XScorpion2
d1806a26e4
Split transport mirror (#11046)
* Split transport mirror support

* Updated RGB Matrix to respond to electrical events instead of key events

* split matrix slave fix
2021-02-16 11:30:33 +11:00
Nick Brassel
31c57aab35 qmk cformat 2021-01-17 10:19:56 -08:00
Ryan
115b60b0e1
Fix duplicate I2C_KEYMAP_START define (#11237) 2020-12-17 15:49:24 +00:00
Casey Webster
5e2b53541b
Add modifier state to the split keyboard transport (#10400)
* Add modifier state to the split transport

This adds modifier state to the i2c and serial transport for split
keyboards.  The purpose of this is to allow e.g. displaying modifier
state on the slave side of a split keyboard on an oled.  This adds one
byte to the data transferred between halves.

This also fixes a missing ifdef guard for BLACKLIGHT_ENABLE.

Break modifiers into real/weak/oneshot

Fix incorrect slave serial mod setting

Fix typo in serial weal mod setter

Fix build errors for the I2C code that I introduced

Code cleanup and formatting per project preferences

Correctly get oneshot mods

Fix missing braces

Remove unneeded ifdef guard

Make the added state transport optional

Add documentation for the new define to enable this feature

Fix stray grave mark

* Fix error introduced in conflict resolution
2020-12-17 16:21:26 +11:00
XScorpion2
a8d0ec0749
[Split] Sync Timer feature (#10997)
A timer that is kept in sync between the halves of a split keyboard
2020-12-01 10:04:42 -08:00
Joel Challis
6ceaae30f5
Run clang-format manually to fix recently changed files (#8552) 2020-03-25 14:39:53 +11:00
brickbots
bfb2f8e0a8
Add Word Per Minute calculation feature (#8054)
* Add Word Per Minute calculation feature

* Fix copyright info

* Remove header from quantum.c, setup overloadable keycode inclusion for WPM, update docs

* Simplify logic for keycode filtering

* Adding link from summary to wpm_feature info

* Update docs/feature_wpm.md

Typo in function prototype example in docs

Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>

* Add WPM transport via i2c

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-03-23 00:06:16 +11:00
Danny
bf962821b3 Remove check for EH define (#7525)
Its use in lets_split_eh was factored out in https://github.com/qmk/qmk_firmware/pull/6411
2019-12-02 17:10:09 +00:00
skullY
b624f32f94 clang-format changes 2019-08-30 15:01:52 -07:00
Drashna Jaelre
f6c7e11426 Remove the need to specify NUM_OF_ENCODERS for the Encoder feature (#6328)
* Remove the need to set NUM_OF_ENCODERS

Instead, calculate the size of the array, and use that instead

* Add hack for split common support

* Remove NUM_OF_ENCODERS from keyboard config

Can be reverted, if needed
2019-07-16 01:40:54 -07:00
Danny Nguyen
2c8149aa55 Fix compilation error when I2C and encoder is enabled for split code 2019-06-02 21:23:35 -07:00
Rainer Clasen
12e6d41202 [Split] fix split_common i2c backlight disabling (#3886)
slave backlight was always on - as get_backlight_level() doesn't
indicate if the backlight is enabled or not.

also updated the corosponding code for serial transport to stop peeking
directly at 'internal' backlight_config structure.
2019-05-07 10:45:10 -07:00
Takeshi ISHII
7e67bd791b Change split_common to use RGBLIGHT_SPLIT (#5509)
* add I2C_slave_buffer_t to quantum/split_common/transport.c

Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results.

* add temporary pdhelix(Patched Helix) code

* temporary cherry-pick from #5020

add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h

* add post_config.h support to build_keyboard.mk

* add quantum/rgblight_post_config.h, quantum/split_common/post_config.h

Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk.

quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined.

quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C.

* Change split_common's transport.c I2C to use the synchronization feature of rgblight.c

* Change split_common's transport.c serial to use the synchronization feature of rgblight.c

* test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix

* Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix"

This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98.

[x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default
[x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3)
[x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default

[x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default
[x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default
[x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default

[x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default
[x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default
[x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default

* Test End, Revert "temporary cherry-pick from #5020"

This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0.

* Test End, Revert "add temporary pdhelix(Patched Helix) code"

This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660.

* temporarily cherry-pick from #5020 to see if it passes the travis-ci test.

add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h

* Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test."

This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f.

* update docs/config_options.md

* update split_common/transport.c, improves maintainability of serial transaction IDs.

No change in build result.

* temporary cherry-pick from #5020

* fix build fail keebio/iris/rev3:default

* fix build fail lets_split_eh/eh:default

* Revert "temporary cherry-pick from #5020"

This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947.

* temporary cherry-pick from #5020 (0.6.336)

* Revert "temporary cherry-pick from #5020 (0.6.336)"

This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c.

* temporary cherry-pick from #5020 (0.6.336)
2019-04-19 15:25:08 -07:00
XScorpion2
63177760de Added encoder support to split common code (#5477)
* Added slave encoder support to split common

* Fixing handwired/xealous/rev1 compile error

* Removed unnecessary ifdef
2019-04-03 16:01:17 -07:00
Danny
f077204fae Add support for RGB LEDs wired directly to each half's controller (#5392)
* Add support for wiring RGB LEDs for both halves directly to their respective controllers

RGB LEDs for each half don't need to be chained together across the TRRS cable with this

* Add split RGB LED support for serial

* Update config/rules for bakingpy layout

* Un-nest ifdefs for hand detection

* Read RGB config state from memory instead of EEPROM for serial updates

* Reuse existing LED pointer instead of creating new one
2019-03-23 17:20:14 -07:00
James Churchill
cd696ed3d1 Fix i2c splits with >8 columns (#5454) 2019-03-20 07:43:36 -07:00
Len Trigg
9c4424ae2c rgblight split transfer non-eeprom config (#5396)
* Make rgblight_update_dword not update eeprom (we already have
eeconfig_update_rgblight for that).

Make split i2c keyboards transfer active rgblight config rather than
eeprom saved version of rgblight config, enabling runtime changes
that aren't persisted to eeprom.

* prev_level and prev_rgb only store successfully transmitted values
2019-03-15 13:46:49 -07:00
James Churchill
37932c293c Next set of split_common changes (#4974)
* Update split_common to use standard i2c drivers

* Eliminate RGB_DIRTY/BACKLIT_DIRTY

* Fix avr i2c_master error handling

* Fix i2c_slave addressing

* Remove unneeded timeout on i2c_stop()

* Fix RGB I2C transfers

* Remove incorrect comment
2019-03-12 10:23:28 -07:00
James Churchill
28929ad017 Simplify split_common Code significantly (#4772)
* Eliminate separate slave loop

Both master and slave run the standard keyboard_task main loop now.

* Refactor i2c/serial specific code

Simplify some of the preprocessor mess by using common function names.

* Fix missing #endif

* Move direct pin mapping support from miniaxe to split_common

For boards with more pins than sense--sorry, switches.

* Reordering and reformatting only

* Don't run matrix_scan_quantum on slave side

* Clean up the offset/slaveOffset calculations

* Cut undebounced matrix size in half

* Refactor debouncing

* Minor fixups

* Split split_common transport and debounce code into their own files

Can now be replaced with custom versions per keyboard using
CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes

* Refactor debounce for non-split keyboards too

* Update handwired/xealous to build using new split_common

* Fix debounce breaking basic test

* Dodgy method to allow a split kb to only include one of i2c/serial

SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only
that driver code in the binary.

SPLIT_TRANSPORT = custom (or anything else) will include neither, the
keyboard must supply it's own code

if SPLIT_TRANSPORT is not defined then the original behaviour (include
both avr i2c and serial code) is maintained.

This could be better but it would require explicitly updating all the
existing split keyboards.

* Enable LTO to get lets_split/sockets under the line

* Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE

* Remove avr-specific sei() from split matrix_setup

Not needed now that slave doesn't have a separate main loop.
Both sides (on avr) call sei() in lufa's main() after exiting
keyboard_setup().

* Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT.

* Add comments and fix formatting.
2019-01-17 10:08:14 -08:00