Commit Graph

179 Commits

Author SHA1 Message Date
QMK Bot
be3d7063a0 Merge remote-tracking branch 'origin/master' into develop 2021-09-29 18:37:46 +00:00
Drashna Jaelre
02ab7b1888
[Core] Fix "6kro enable" and clarify naming (#14563)
* Fix USB_6KRO_ENABLE compilation errors

* Add info to docs

* Rename define to be more accurate

* Remove unused rule

* Refixe docs
2021-09-29 11:37:11 -07:00
QMK Bot
52127e7bda Merge remote-tracking branch 'origin/master' into develop 2021-09-28 19:21:40 +00:00
Alexander Kagno
bc818352a3
[Keymap] arkag userspace/keymap -- new macro and minor preonic keymap change (#14623)
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-09-28 12:21:10 -07:00
Drashna Jael're
675c5a5e12
Merge remote-tracking branch 'origin/master' into develop 2021-09-24 12:21:32 -07:00
Drashna Jaelre
a68c4d8b81
[Keyboard] Update default keymaps for OLKB boards (#14565) 2021-09-23 20:08:23 +01:00
Ryan
41c50bb653
Change keyboard level include guards to pragma once (#14248)
* Change keyboard level include guards to `pragma once`

And clean up a lot of layout macros

* Oops

* Remove dangling endif
2021-09-01 19:03:14 +10:00
QMK Bot
329c130202 Merge remote-tracking branch 'origin/master' into develop 2021-08-25 19:04:06 +00:00
MechMaster48
89f2b9486f
[Keymap] mechmaster48 keymap for OLKB Preonic rev3 (#14137) 2021-08-25 12:03:27 -07:00
Drashna Jael're
8e8ec6338c
Merge remote-tracking branch 'origin/master' into develop 2021-08-12 09:18:18 -07:00
Jarrett Drouillard
2218879d68
[Keymap] add kuatsure planck keymap (#10625)
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-08-12 08:56:25 -07:00
James Young
a03aa301de
Remove Full Bootmagic (#13846)
* disambiguate Bootmagic rules in keymaps

The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.

This commit edits the files to specify that full Bootmagic is intended.

* remove BOOTMAGIC_ENABLE=full setting

* unify commented BOOTMAGIC_ENABLE rules in keyboards

Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no       # Virtual DIP switch configuration;g' {} +
```

* remove commented Bootmagic rules from keymap/user level

Command:

```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```

* update keyboard BOOTMAGIC_ENABLE rule formatting

Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```

* update keyboards' BOOTMAGIC_ENABLE settings

Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```

* update keymap/user BOOTMAGIC_ENABLE settings

Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```

* remove and replace inline comments in keyboards and keymap/user files

Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1     # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1      # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1       # Enable Bootmagic Lite;g' '{}' +
```

* rename improperly named makefiles

Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.

This commit corrects the filenames of the affected files.

* update renamed file with new rule formatting

* update QMK's template files

Updates QMK's `rules.mk` templates to use the new inline comment.

* update QMK Docs

- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes

* rules.mk patch for coarse/ixora and coarse/vinta
2021-08-06 23:59:56 -07:00
Drashna Jaelre
b8a1e14f53
Remove deprecated callbacks for encoders and dip switches (#13404) 2021-07-24 00:37:19 -07:00
Xelus22
b73a29aaea
[Bug] Develop - Change uint32_t to layer_state_t (#13596)
* fix sat75

* update uint32_t to layer_state
2021-07-19 09:50:55 -07:00
Ryan
50d4dfd2e6
keymap_extras: Remove deprecated defines (#12949) 2021-07-06 09:05:11 +10:00
fauxpark
03807c2c6e Merge remote-tracking branch 'upstream/master' into develop 2021-07-03 16:38:05 +10:00
David Rambo
170de06475
[Keymap] Update personal keymaps, add Corne keymap, and update non-kc LAYOUT for Iris (#12273)
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-07-02 22:30:32 -07:00
QMK Bot
371d3bfbdd Merge remote-tracking branch 'origin/master' into develop 2021-07-02 06:09:01 +00:00
Ryan
5046883531
Cleanup gitignore (#13390) 2021-07-02 16:08:34 +10:00
Drashna Jaelre
0bde920817
Convert Dip Switch callbacks to boolean functions (#13399) 2021-07-01 08:22:21 -07:00
nopjmp
050457818c
[Keymap] Fix Preonic rev3 default keymap (#12698)
The rev3 boards use RGBLIGHT_ENABLE now instead of BACKLIGHT_ENABLE.

This resolves the issue of flashing and losing functionality with the default keymap.
2021-06-19 19:20:50 -07:00
James Young
1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
George Wietor
1ab2167ff9
[Keyboard] VIA support for Preonic Rev3 (#11344)
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Jack Humbert <jack.humb@gmail.com>
2021-05-10 15:43:05 -07:00
Sean Johnson
df57590ec6
add ttys0's planck and preonic keymaps (#10560)
* resynced with upstream, and adjusted keymap layout for planck

* updated keyboard layout

Signed-off-by: Sean Johnson <sean@ttys0.net>

* swapped out bspc for del on symb layer

Signed-off-by: Sean Johnson <sean@ttys0.net>

* fixed typo with brightness media keys

* turns out my brightness config was correct, it was macOS that had gone sideways

* updated to bring in line with requirements for merging into upstream

* removed redundant config from rules.mk

moved media controls to FUNC layer for Planck layout

* added GPL2+ compatible license header

Signed-off-by: Sean Johnson <sean@skj.dev>

* removed unused MIDI comment

Signed-off-by: Sean Johnson <sean@skj.dev>

* removed extraneous MIDI comments

* removed extraneous comments
2021-05-08 20:00:11 -07:00
Alexander Kagno
ef6802ca60
New keyboard keymap, small keymap updates to mm2 keymap (#12310)
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Alex <alex@turncommerce.com>
2021-04-18 23:17:34 -07:00
yhaliaw
b44bffe954
[Keymap] Add yhaliaw keymap for Planck/Rev6.1. (#11318) 2021-03-14 13:19:05 -07:00
Ryan
c1b2e87e89
Remove MIDI_ENABLE_STRICT from user keymaps (#11750) 2021-02-06 09:35:10 +11:00
Ryan
6937f1d70e
Remove MIDI_ENABLE_STRICT from keyboards' config.h (#11679) 2021-01-27 17:26:26 +11:00
Damien
8ab6efdc80
Fix preonic layout documentation (#11655)
* [Apple M5120] First iteration

* Cleaned apple_m5120 files

* Changes requested by PR

* Update keyboards/apple_m5120/iso/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/apple_m5120/iso/keymaps/default/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Updated Preonic default layout doc

* Removed non related files

Co-authored-by: dbroqua <dbroqua@mousur.org>
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-01-24 14:57:22 +00:00
Ryan
4ed67d666e
Remove DESCRIPTION, N-Q (#11631) 2021-01-20 11:57:45 +11:00
pcurt854
f98e983141
Added pcurt854 keymap to Preonic keyboard (#10911) 2020-11-25 19:04:55 +00:00
bghull
a8967778d4
[Keymap] Add user keymaps to qmk master (#10870)
* Create user keymaps

* Prepare user keymaps for PR

Co-authored-by: bghull <35785950+BaneJammin@users.noreply.github.com>
2020-11-16 21:21:24 -08:00
Filip Paryż
381884fa9b
Fix for issue #10386 - Can't compile preonic:dudeofawesome (#10557)
Co-authored-by: FilipParyz <paryz.1i12@op.p>
2020-10-14 13:41:34 +11:00
Max Drasbeck
2fbf68f2d2
[Keymap] Adding drasbeck keymaps for lily58pro and preonic (#10013)
* added danskish keymap

* Added readme.md

* Clean up in keymap.c

* Added license

* Changed name of keymap

* adjusting tapping term

* added encoder functionality

* housekeeping

* layouts resemble the layout now

* implemented suggestions from drashna

* added keymap for preonic rev3

* added default layer to readme.md

* removed backslashes

* Update keyboards/lily58/keymaps/drasbeck/keymap.c

* Update keyboards/preonic/keymaps/drasbeck/readme.md

* Update keyboards/lily58/keymaps/drasbeck/rules.mk

* Update keyboards/preonic/keymaps/drasbeck/keymap.c

* Update keyboards/preonic/keymaps/drasbeck/keymap.c

* Update keyboards/preonic/keymaps/drasbeck/keymap.c

* Update keyboards/preonic/keymaps/drasbeck/keymap.c

* Update keyboards/lily58/keymaps/drasbeck/rules.mk

* Update keyboards/lily58/keymaps/drasbeck/rules.mk

* Update keyboards/lily58/keymaps/drasbeck/rules.mk

* Update keyboards/preonic/keymaps/drasbeck/rules.mk
2020-09-22 14:42:55 -07:00
Brian Marsh
9c31a7adba
[Keymap] Add pezhore preonic keymap (#10269)
* Squashing commits - adding preonic keymap

This adds a custom keymap, including numpad layer, emoji, and kamoji
key mappings.

* Removing unnecessary trailing backslash characters

* removing the unnecessary json keymap

* removing unnecessary trailing slashes from the default keymap

* switching to tap_code

* Apply suggestions from code review

This should enable a toggleable numpad

* adding license

* Stripping out FN keycodes in favor of a momentary layer
2020-09-22 13:02:01 -07:00
codecoffeecode
ccab502241
[Keymap] add codecoffeecode keymap for Preonic (#10364)
* Adding preonic layout

* deleting unnecessary files

* Fixing spacing

* I need to not commit things while I'm not sober

* Update keyboards/preonic/keymaps/codecoffeecode/keymap.c

* Update keyboards/preonic/keymaps/codecoffeecode/keymap.c

* Update keyboards/preonic/keymaps/codecoffeecode/keymap.c

* Adding license header
2020-09-21 18:41:36 -07:00
Dan White
f650b03fb7
[Keymap] Badger keymaps/userspace (#10239)
* Badger keymaps

* bug fix - linter

* code review feedback and ortholinear bugs

* cleanup

* backing out suspect bug after doing additional research

* code review feedback

* code review feedback

* changing default badger keymap and small bugfix
2020-09-16 21:03:28 -07:00
Jeong Arm
ceb3ef955e
[Keyboard] Update preonic/Kjwon15 layout (#9718) 2020-07-15 18:49:28 +10:00
Guillaume Gérard
7c17b87215
Fix WORKMAN layer typo in dudeofawesome planck/preonic (#9576) 2020-06-29 12:54:50 +10:00
William Lindvall
7f5656996c
[Keymap] Add "shwilliam" Preonic keymap (#9409)
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-06-15 03:26:58 -07:00
James Young
fced377ac0
2020 May 30 Breaking Changes Update (#9215)
* Branch point for 2020 May 30 Breaking Change

* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)

* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)

* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)

* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)

* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)

* Convert V-USB usbdrv to a submodule (#8321)

* Unify Tap Hold functions and documentation (#8348)

* Changing board names to prevent confusion (#8412)

* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)

* Move spaceman keyboards (#8830)

* Migrate miscellaneous `fn_actions` entries (#8977)

* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)

* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)

* Refactor Lily58 to use split_common (#6260)

* Refactor zinc to use split_common (#7114)

* Add a message if bin/qmk doesn't work (#9000)

* Fix conflicting types for 'tfp_printf' (#8269)

* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)

* Refactor and updates to TKC1800 code (#8472)

* Switch to qmk forks for everything (#9019)

* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)

* Audio enable corrections (2/3) (#8903)

* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)

* Audio enable corrections (Part 4) (#8974)

* Fix typo from PR7114 (#9171)

* Augment future branch Changelogs (#8978)

* Revert "Branch point for 2020 May 30 Breaking Change"
2020-05-30 13:14:59 -07:00
Peter (Rocky) Villano
2c9ab8a606
[Keymap] adds pvillano's preonic keymap (#9106)
* adds pvillano's preonic keymap

* Remove unnecessary "\" (tested - ok)
2020-05-15 19:17:24 -07:00
Alex Daigre
7bb9c76c80
[Keymap] Custom preonic layout optimised for programming (#8263)
* my new layout, draft one, untested.

* updated mapping to include more keys

* updated layout name to be more descriptive. Updated readme with more information.

* added more info to the readme and spellchecked it.

* Added the Json for the keyboard layout images and updated the readme to reflect this.

* Updated Image link

Updated Image link so that it links to the correct place

* updated copyright info to include MY name.

* Updated copyright attribuatation to include the author of the file I modified.

* added the backlighting key back to the adjust layer so that it is usable.

* updated the name of the keymap to match my github name.
2020-05-06 16:03:42 -07:00
Elisiano Petrini
e0fffcde99
Updated personal preonic keymap (#8851) 2020-04-20 03:12:48 +10:00
Elisiano Petrini
a4af41cb13
Added custom keymap for preonic (#7548)
* Added custom keymap

* Update keyboards/preonic/keymaps/elisiano/keymap.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Address PR comments and added CTL_T(KC_ESC) on other layouts as well

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-02-21 11:16:39 -05:00
Keelhauler
9241d11dc5
[Keymap] Add personal keymap (#7338)
* Copy default config
* Copy and edit Preonic keymap layers
* Update README
2020-02-13 15:35:53 -05:00
Alfred Maler
707c04b4ab
[Keymap] Add users/alfrdmalr and switch to layouts (#8030)
* WIP do not merge

* first pass at custom preonic layout

* add auto shift and reset via leader key

* Update readme

* update copyright notice

* formatting changes

* fix: use MO instead of process_record_user

* added backslash and moved grave position

* remove extraneous 'j' characer in NUMPAD template

* update template formatting

* remove process_record_user

* swap "!" with "@"

* fix readme formatting

* update readme layout image

* restore settings layer

* add windows minimize sequence

* fix: switch to correct seq function for three-key sequence

* fix: missing semicolon

* refactor: move keymap to userspace and generic 5x12 layout

* add numlock to numpad layer

* add readme

* update readme formatting

* remove unused wrappers from layout keymap

* update readme title to reflect new location

* remove alfrdmalr directory from preonic/keymaps

* clean up user config
2020-02-07 18:42:04 -08:00
Alfred Maler
5f35203d1b [Keymap] Feature/preonic/rev3/alfrdmalr (#7870)
* WIP do not merge

* first pass at custom preonic layout

* add auto shift and reset via leader key

* Update readme

* update copyright notice

* formatting changes

* fix: use MO instead of process_record_user

* added backslash and moved grave position

* remove extraneous 'j' characer in NUMPAD template

* update template formatting

* remove process_record_user

* swap "!" with "@"

* fix readme formatting

* update readme layout image
2020-01-20 23:01:09 -08:00
M. de Verteuil
9b9a0f0bcb [Keymap] Added mverteuil keymaps and userspace common code (#7876)
* Added mverteuil content

- Userspace
- Knops keymap
- Preonic keymaps

* Simplified and replaced some magic numbers

* Convert tabs to spaces

* Clean up LED handling, better animation, better layer init

* Use get_highest_layer per @drashna suggestion

* Reorder prototypes/reformat

* Simplified/more expessive and fixed initial layer LED

* Remove changes to git ignored files
2020-01-18 11:24:56 -08:00
Juno Nguyen
37d7fd12e2 Juno (#7652)
* Added community layout juno and junonum; removed poorly maintained variants of juno; added junonum-a47.

* Added community layout juno and junonum; removed poorly maintained variants of juno; added junonum-a47.

* updated layout type for juno

* Performing requested changes; renaming a47; fine-tuning of codes in community layout keymaps.

* Fine tuning to requested changes.

* Further tuning to suggestion.

* Update layouts/community/ortho_4x12/juno/keymap.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update layouts/community/ortho_4x12/juno/keymap.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/maartenwut/atom47/keymaps/junonum_a47/keymap.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/maartenwut/atom47/keymaps/junonum_a47/keymap.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

Co-authored-by: fauxpark <fauxpark@gmail.com>
2020-01-07 15:35:08 +11:00