Commit Graph

44 Commits

Author SHA1 Message Date
Ryan
4791cfae1a
Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
Ryan
7eea780a7d
Remove bootloader listings from rules.mk (#14330) 2021-09-10 13:35:46 +10:00
James Young
a03aa301de
Remove Full Bootmagic (#13846)
* disambiguate Bootmagic rules in keymaps

The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.

This commit edits the files to specify that full Bootmagic is intended.

* remove BOOTMAGIC_ENABLE=full setting

* unify commented BOOTMAGIC_ENABLE rules in keyboards

Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no       # Virtual DIP switch configuration;g' {} +
```

* remove commented Bootmagic rules from keymap/user level

Command:

```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```

* update keyboard BOOTMAGIC_ENABLE rule formatting

Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```

* update keyboards' BOOTMAGIC_ENABLE settings

Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```

* update keymap/user BOOTMAGIC_ENABLE settings

Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```

* remove and replace inline comments in keyboards and keymap/user files

Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1     # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1      # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1       # Enable Bootmagic Lite;g' '{}' +
```

* rename improperly named makefiles

Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.

This commit corrects the filenames of the affected files.

* update renamed file with new rule formatting

* update QMK's template files

Updates QMK's `rules.mk` templates to use the new inline comment.

* update QMK Docs

- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes

* rules.mk patch for coarse/ixora and coarse/vinta
2021-08-06 23:59:56 -07:00
Xelus22
b73a29aaea
[Bug] Develop - Change uint32_t to layer_state_t (#13596)
* fix sat75

* update uint32_t to layer_state
2021-07-19 09:50:55 -07:00
Ryan
82137e14f2
Migrate SHIFT_ESC and RGB fn_actions to Grave Escape and RGB keycodes (#13360) 2021-07-06 09:08:08 +10:00
James Young
a0cc2dc6d0
Update noroadsleft userspace and keymaps (2021-06-02) (#13086) 2021-06-02 23:06:30 -07:00
James Young
1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
James Young
8ed1addd1e
Update noroadsleft userspace and keymaps (2021-05-03) (#12796)
* Set Dvorak as the standard base layer

* Remove unneeded includes

* Remove custom handling for Quake 2

Have now rewritten my in-game configuration to use Dvorak mapping instead of QWERTY, which means I don't need any of this stuff.

* Clean up comments in KC60 keymap
2021-05-03 17:31:36 -07:00
James Young
f9fb52951d
Update noroadsleft userspace and keymaps (2021-04-26) (#12711)
* Update noroadsleft userspace and keymaps (2021-04-26)

- add Discipline keymap
- move Emulated Non-US Backslash, Numeric Keypad and F13-F24 code fully to userspace
- re-add some custom keycode handling I accidentally deleted
- update VRSN keycode
- update KC60 and userspace readmes

* remove Git readme from kc60 keymap

* update kc60:noroadsleft readme

Concatenates this readme into one file, and updates the image links.
2021-04-26 23:44:45 -07:00
QMK Bot
998c4c93a2 Merge remote-tracking branch 'origin/master' into develop 2021-02-22 03:42:10 +00:00
Joshua Diamond
5660d80bb0
[Keyboard] reduce confusion for kbdfans/kbd75 rounds/revisions (#11972) 2021-02-21 19:41:31 -08:00
QMK Bot
986dc7f0e9 Merge remote-tracking branch 'origin/master' into develop 2021-02-10 19:18:29 +00:00
James Young
5a73558a21
[Keymap] add noroadsleft userspace; add and update keymaps (#11686) 2021-02-10 20:17:42 +01:00
QMK Bot
1ab1ba3c3e Merge remote-tracking branch 'origin/master' into develop 2021-01-20 03:05:53 +00:00
Aaron Ireland
45bec2d281
[Keymap] Mac-friendly KBD 75% layouts (#11507)
* Add Aaron's KBD75 v2 for Macbook

* Add Colemak & Dvorak layers

* Update keymap to adhere to style guide and add license

* Rename README.md to readme.md
2021-01-19 19:05:23 -08:00
Nick Brassel
9e18f41fcf Merge remote-tracking branch 'upstream/master' into develop 2021-01-20 10:00:28 +11:00
Ryan
1e1b469fa2
Remove DESCRIPTION, K-M (#11619) 2021-01-20 09:56:41 +11:00
QMK Bot
749d9f2227 Merge remote-tracking branch 'origin/master' into develop 2021-01-14 07:08:25 +00:00
Joshua Diamond
c46619d8fb
[Keyboard] eliminate nested layout warnings in kbd75 (#11540) 2021-01-13 23:07:47 -08:00
Ryan
415d683ea7
Remove unused action_get_macro() usages in user files (#11165) 2021-01-11 01:25:45 -08:00
Zach White
c0dcee96a8
Initial list of keyboards to exclude from CI (#11213) 2020-12-21 15:38:39 +01:00
Joel Challis
adfd34c451
Refactor to use led config - Part 2 (#10906)
* Refactor to use led config

* Refactor to use led config

* Refactor to use led config
2020-11-17 17:06:23 +00:00
Ethan Nguyen
57dd756507
[Keymap] Add ethan605 keymap for kbd75 (#10343)
* Add my KBD75 keymaps

* Acknowledge PR reviews

* Acknowledge PR reviews
2020-09-22 11:47:03 -07:00
Adam DeHaven
9236c3a9d0
[Keymap] Adding custom keymaps (#9426)
* Adding custom keymaps

* Update keyboards/kbdfans/kbd75/keymaps/adamdehaven/keymap.c
2020-06-26 03:17:31 -07:00
Eduardo Lourenço Pinto Neto
f1e09dd388
Update keymap.c (#9265)
Add Insert on Fn+Del and fix TG to TO for layer switching
2020-06-03 06:33:27 +10:00
MechMerlin
3157f5f436
VIA Support: KBD75 rev1/rev2 (#8214)
* add a VIA keymap for kbd75

* rev2 is a completely different pcb allowing a NEW layout, setting this to have a different product id so users don't get confused when they're able to enable numpad layout on rev1 VIA

* Update keyboards/kbdfans/kbd75/rev1/config.h

Co-Authored-By: Joel Challis <git@zvecr.com>

* Update keyboards/kbdfans/kbd75/rev2/config.h

Co-Authored-By: Joel Challis <git@zvecr.com>

Co-authored-by: Joel Challis <git@zvecr.com>
2020-02-21 18:21:02 +00:00
MechMerlin
db2f187493
Documentation: KBD75 (#8038)
* update kbd75 readme

* update bmini readme

* update wkl.kr readme

* Update keyboards/kbdfans/kbd75/readme.md

* Update keyboards/kbdfans/kbd75/readme.md
2020-01-30 11:37:00 -08:00
ridingqwerty
0f7d294ac3
Remove filesize changes from default-ish rules.mk files, sans handwired (#8040) 2020-01-30 13:47:48 -05:00
Mikkel Jeppesen
05d6e6ca78 Ensure setPinInput actually sets input high-Z (#6237)
* Ensure setPinInput actually sets input high-z

* Fixed _PIN_ADDRESS Macro arguments
as recommended by vomindoraan

* Fixed instances of setInput to use new behavour

* Changed kmac matrix to use input with pullups

* Update keyboards/gh60/revc/revc.h

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Fixed input state for unselect_rows

* fixed merge conflict

* Updated all instances of older uses of setPinInput()

* Fixed naming mistake

Co-authored-by: fauxpark <fauxpark@gmail.com>
2020-01-26 23:04:38 -05:00
moyi4681
426c03eda0 [Keyboard] add kbdmini; dztech, kbdfans keyboards cleanup (#7223)
* add kbdmini, dztech and kbdfans keyboards small fix

* Caps lock indicator moved from keymap

* Update dz65rgb.c

* fix error

* fix matthewrobo keymap error

* Update keyboards/kbdfans/kbd67/mkiirgb/mkiirgb.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/dztech/dz60rgb/dz60rgb.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/dztech/dz60rgb_ansi/dz60rgb_ansi.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/dztech/dz65rgb/dz65rgb.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* wrap all of the g_led_config stuff and rgb matrix functions in ifdefs

wrap all of the g_led_config stuff and rgb matrix functions in ifdefs
2019-11-14 11:55:46 -08:00
davidwed
3e77e2aeac [Keyboard] KBDfans/KBD75: Set "RGBLIGHT_SLEEP" as default (#7205) 2019-10-30 21:57:53 -07:00
fauxpark
2ee961c9e8 Cleanup rules.mk for 32U4 keyboards, I-K (#7097)
* Cleanup rules.mk for 32U4 keyboards, I-K

* Clean up ivy rules.mk
2019-10-21 21:43:18 -07:00
Brad
acec007dfa [Keymap] add keymap broswen for kbd75 (#6814) 2019-09-25 02:01:58 -07:00
noroadsleft
86d59f1034 [Keyboard] KBD75 refactor (#6755)
* convert codebase to #pragma once

* fix file includes

- quantum.h is included at keyboard level, redundant at revision level
- keyboard-level path is accessible at revision level, remove relative pathing

* duplicate common layout macros from rev1 to rev2

Add the layout macros supported by both rev1 and rev2 to rev2.h directly, which exposes these layouts to QMK Configurator.

* enable community layout support (75_ansi, 75_iso)

* add LAYOUT_75_iso layout data

It needs its own tree because its keys are in a different order from LAYOUT_iso_1u even though the physical layout is the same.

* minimize rules.mk files (use QMK defaults)

* use atmel-dfu bootloader rule

* fix typo on rev1 info.json
2019-09-17 10:34:52 -07:00
tucznak
aa587a5abb [Keymap] Add personal keymaps (#6217)
* TuCZnak's NIU keymap

* TuCZnak's KBD75 layout

* TuCZnak's KBD67 layout

* Implemented suggested changes

* Implemented suggested changes, cleanup

* Implemented suggested changes, cleanup
2019-07-01 12:42:17 -07:00
Drashna Jaelre
faaaa134fd Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997) 2019-06-06 12:09:56 -07:00
kingwangwong
01f4b67ef0 [keymap] adding kingwangwong's keymaps (#5626)
* Add files via upload

* kingwangwong

* kingwangwong

* revisions and adding atom40

* revisions for 5626

* revisions for 5626

* revisions for 5626.

* revisions for 5626, re added safe range

* revisions for 5626, added qmkkeyboard

* revisions for 5626, quefrency
2019-04-17 13:26:20 -07:00
MechMerlin
7276cc24d0 [Keyboard] KBDFans Minor Fixes (#5238)
* pragma once and turn on bootmagic lite

* pragma once changes and turning on bootmagic lite

* switch to using pragma once

* switch to using #pragma once

* switch to using #pramga once
2019-02-25 16:59:40 -08:00
Eduardo Lourenço Pinto Neto
9b3f397ab2 Update README.md (#5135)
Update to new structure
2019-02-15 08:58:38 -08:00
Eduardo Lourenço Pinto Neto
ecdf14bb62 Update keymap.c (#5136)
Fix minor bug on toggle layer code from Mac to Windows layer.
2019-02-15 08:23:44 -08:00
fauxpark
7c2bee8b88 Swap KBD75 caps lock LED pin levels (#5132) 2019-02-14 21:01:40 -08:00
Drashna Jaelre
a08be85780 Add pin initializiation for KBD75 (#5129)
So that the LED indicator actually works
2019-02-14 13:28:14 -08:00
Mike Bell
0b3b80afc1 Add digital layout for KBD75 (#5095)
* Initial commit of digital kbd75 layout

* Add readme

* Update readme

* Update readme with suggestions
2019-02-11 06:29:11 -08:00
MechMerlin
b49dbf9b19 [Keyboard] Create KBDFans directory (#5025)
* move over kbd19x into the kbdfans directory

* move over kbd4x into the kbdfans directory

* move kbd66 into the kbdfans directory

* move the kbd6x into the kbdfans directory

* move kbd8x into the kbdfans directory

* move kbd75 into the kbdfans directory

* move kbd67 into kbdfans directory

* add a fairly sparse readme for kbdfans directory

* update make instructions for keyboards and add the Complete Newbs Guide to readmes that was missing it

* get kbd75 compiling again

* remove repetitive #defines of KC_NO and KC_TRNS when QMK_KEYBOARD_H is already included in KBD75

* add links to kbdfans readme

* fix some readme formatting

* there is no reason to have two different keymaps with such a small difference, condensing to one

* turning on backlights by default

* enable backlight by default for kbd66

* noticed that the kbd75 had caps lock led code in every keymap. Moved it out to the keyboard.c so everyone can partake.

* Update keyboards/kbdfans/kbd66/readme.md

Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>

* update readme link ordering
2019-02-04 10:29:04 -08:00