tgrosinger/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
framework-16-tgrosinger
qmk_firmware/keyboards/4pplet/yakiimo/rev_a
History
Nick Brassel 416af0171c
Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353) 
* Remove CORTEX_ENABLE_WFI_IDLE from the codebase.

* Turn on CORTEX_ENABLE_WFI_IDLE by default.
2023-06-23 20:31:25 +01:00
..
config.h Move matrix config to info.json, part 1 (#19985) 2023-03-05 22:53:52 +00:00
info.json info.json whitespace cleanups (#20651) 2023-05-02 08:25:15 +10:00
matrix_diagram.md 4pplet/yakiimo Layout Macro Conversion and Additions (#20436) 2023-04-16 15:33:59 -07:00
readme.md [Keyboard] Yakiimo PCB (#16984) 2022-05-11 16:37:43 -07:00
rules.mk Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353) 2023-06-23 20:31:25 +01:00

readme.md

Yakiimo Rev A

  • Keyboard Maintainer: 4pplet
  • Hardware Supported: Yakiimo Rev A

If your PCB is of revision A1, use the "proto" code in the Yakiimo directory

Make example for this keyboard (after setting up your build environment):

make 4pplet/yakiimo/rev_a:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
  • Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.