qmk_firmware/keyboards/crkbd/keymaps/hvp/keymap.c

165 lines
6.8 KiB
C

#include QMK_KEYBOARD_H
#include "hvp.c"
#ifdef SSD1306OLED
# include "ssd1306.h"
# include <string.h>
#endif
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 3
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_split_3x6_3(
//,-----------------------------------------. ,-----------------------------------------.
LT(_ADJUST,KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_BSPC,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LSFT_T(KC_ESC), KC_A, KC_S, KC_D, LT(3,KC_F), KC_G, KC_H, KC_J, KC_K, KC_L,TD(TD1),TD(TD2),
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM,KC_DOT,TD(TD3),SC_SENT,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
KC_LGUI, LT(1,KC_SPC),MT(MOD_LSFT, KC_SPC), MT(MOD_LSFT,KC_ENT), LT(2,KC_SPC),KC_LALT
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT_split_3x6_3(
//,-----------------------------------------. ,-----------------------------------------.
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_BSPC,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_DEL, _______, _______, _______, _______, _______, _______,KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_LCTL, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
_______, _______, _______, _______, _______, _______
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT_split_3x6_3(
//,-----------------------------------------. ,-----------------------------------------.
KC_TAB,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_DEL, _______, _______, _______, _______, _______, _______,KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_BSLS,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_LCTL, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_TILD,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
_______, _______, _______, _______, _______, _______
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT_split_3x6_3(
//,-----------------------------------------. ,-----------------------------------------.
_______,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_F1,_______,_______,D_NAVI,_______,_______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
QK_BOOT,KC_PSCR,_______,_______,_______,_______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
_______, KC_VOLD,KC_MPLY, KC_MNXT, KC_VOLU,_______
//`--------------------' `--------------------'
)
};
int RGB_current_mode;
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
layer_on(layer3);
} else {
layer_off(layer3);
}
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
}
#ifdef OLED_ENABLE
// When add source files to SRC in rules.mk, you can use functions.
const char *read_layer_state(void);
const char *read_logo(void);
void set_keylog(uint16_t keycode, keyrecord_t *record);
const char *read_keylog(void);
const char *read_keylogs(void);
// const char *read_mode_icon(bool swap);
// const char *read_host_led_state(void);
// void set_timelog(void);
// const char *read_timelog(void);
bool oled_task_user(void) {
if (is_keyboard_master()) {
// If you want to change the display of OLED, you need to change here
oled_write(read_layer_state(), false);
oled_write(read_keylog(), false);
//oled_write_ln(read_keylogs(), false);
//oled_write_ln(read_mode_icon(keymap_config.swap_lalt_lgui), false);
//oled_write_ln(read_host_led_state()), false;
//oled_write_ln(read_timelog(), false);
} else {
oled_write(read_logo(), false);
}
return false;
}
#endif
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
#ifdef OLED_ENABLE
set_keylog(keycode, record);
#endif
// set_timelog();
}
switch (keycode) {
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}