qmk_firmware/keyboards/gh60/revc
2023-04-15 21:07:32 +10:00
..
keymaps Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
config.h Move matrix config to info.json, part 1 (#19985) 2023-03-05 22:53:52 +00:00
info.json Move remaining LAYOUTs to data driven (#20422) 2023-04-15 21:07:32 +10:00
pinout.txt GH60 Refactor: Move Satan into GH60 directory (#6485) 2019-08-04 23:06:33 -07:00
readme.md GH60 Refactor: Move Satan into GH60 directory (#6485) 2019-08-04 23:06:33 -07:00
revc.h Move remaining LAYOUTs to data driven (#20422) 2023-04-15 21:07:32 +10:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

GH60 Rev C

gh60 Rev C PCB

A common 60% PCB.

Keyboard Maintainer: QMK Community
Hardware Supported: GH60 rev. B and rev. C
Hardware Availability: http://blog.komar.be/projects/gh60-programmable-keyboard/

Make example for this keyboard (after setting up your build environment):

make gh60/revc:default

Note: This GH60 firmware will not be compatible with the GH60 Satan PCB. Conversely, the GH60 Satan firmware will not be compatible with this PCB. Please ensure you have the correct firmware/pcb combination before flashing.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

GH60 Hardware Information

/* Column pin configuration
* col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13
* pin: F0  F1  E6  C7  C6  B6  D4  B1  B7  B5  B4  D7  D6  B3  (Rev.C)
*/
 
/* Row pin configuration
* row: 0   1   2   3   4
* pin: D0  D1  D2  D3  D5
*/
 
GPIO pads
0 F7 WASD LEDs
1 F6 ESC LED
2 F5 FN LED
3 F4 POKER Arrow LEDs
 
B2 Capslock LED
B0 not connected

Functions to controls LED clusters

gh60_caps_led_on()
gh60_poker_leds_on()
gh60_fn_led_on()
gh60_esc_led_on()
gh60_wasd_leds_on()

gh60_caps_led_off()
gh60_poker_leds_off()
gh60_fn_led_off()
gh60_esc_led_off()
gh60_wasd_leds_off()