qmk_firmware/keyboards/handwired/scottokeebs/scottocmd
Joe Scotto 4e27bd2a9a
[Keyboard] Add ScottoCMD handwired keyboard (#21102)
Co-authored-by: jack <0x6a73@protonmail.com>
2023-07-03 12:27:41 -07:00
..
keymaps [Keyboard] Add ScottoCMD handwired keyboard (#21102) 2023-07-03 12:27:41 -07:00
config.h [Keyboard] Add ScottoCMD handwired keyboard (#21102) 2023-07-03 12:27:41 -07:00
info.json [Keyboard] Add ScottoCMD handwired keyboard (#21102) 2023-07-03 12:27:41 -07:00
readme.md [Keyboard] Add ScottoCMD handwired keyboard (#21102) 2023-07-03 12:27:41 -07:00
rules.mk [Keyboard] Add ScottoCMD handwired keyboard (#21102) 2023-07-03 12:27:41 -07:00
scottocmd.c [Keyboard] Add ScottoCMD handwired keyboard (#21102) 2023-07-03 12:27:41 -07:00

ScottoCMD

ScottoCMD

A 40-key ortholinear keyboard with a 6.25u spacebar, 4 dedicated function keys and 0.96" 128x64 OLED display. Case files available here.

  • Keyboard Maintainer: Joe Scotto
  • Hardware Supported: ATmega32U4, 0.96" 128x64 I2C OLED
  • Hardware Availability: Amazon

Make example for this keyboard (after setting up your build environment):

make handwired/scottokeebs/scottocmd:default

Flashing example for this keyboard:

make handwired/scottokeebs/scottocmd:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (1,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available