tgrosinger/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
framework-16-tgrosinger
qmk_firmware/keyboards/kprepublic/bm16a/v2
History
Ryan c3c51231cc
Clean up trailing commas from info.json (#20812)
2023-05-09 17:52:03 +10:00
..
keymaps/default Add KPrepublic BM16A v2 (#19194) 2022-12-09 15:31:13 +11:00
config.h Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
halconf.h
info.json Clean up trailing commas from info.json (#20812) 2023-05-09 17:52:03 +10:00
mcuconf.h Add KPrepublic BM16A v2 (#19194) 2022-12-09 15:31:13 +11:00
readme.md Add KPrepublic BM16A v2 (#19194) 2022-12-09 15:31:13 +11:00
rules.mk Move WS2812_DRIVER to data driven (#20248) 2023-03-26 18:22:12 +11:00

readme.md

BM16A V2

bm16v2

A 16 key macropad, with USB-C and per-key RGB.

  • Keyboard Maintainer: QMK Community
  • Hardware Supported: BM16A PCB (BM16V2-ARM)
  • Hardware Availability: KPrepublic

Make example for this keyboard (after setting up your build environment):

make kprepublic/bm16v2:default

Flashing example for this keyboard:

make kprepublic/bm16a/v2:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available