qmk_firmware/keyboards/montsinger/rewind/keymaps/rossman360/keymap.c
Ryan 74223c34a9
Remove legacy keycodes, part 6 (#18740)
* `KC_RSHIFT` -> `KC_RSFT`

* `KC_RCTRL` -> `KC_RCTL`

* `KC_LSHIFT` -> `KC_LSFT`

* `KC_LCTRL` -> `KC_LCTL`
2022-10-16 14:14:40 +01:00

57 lines
2.6 KiB
C

#include QMK_KEYBOARD_H
#include "rossman360.h"
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum layer_names {
_BASE,
_DEL,
_FN1,
_FN2,
_NUM,
};
#define PGMOD LT(_NUM, KC_PGDN)
#define SPCMOD LT(_FN1, KC_SPACE)
#define ZSHIFT MT(MOD_LSFT, KC_Z)
#define TABMOD LT(_FN1, KC_TAB)
#define ESCMOD LT(_FN1, KC_1)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_ortho_5x10(
ESCMOD, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT,
ZSHIFT, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,
KC_BSPC, ALTDEL, KC_LCTL, TABMOD, PGMOD , KC_ENTER,SPCMOD, MO(_DEL), KC_BSPC, KC_DEL
),
[_FN1] = LAYOUT_ortho_5x10(
XXXXXXX, KC_ESC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, QK_BOOT,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
JUMPBACK,XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_LEFT, KC_UP, KC_RIGHT,KC_END,
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, PMERGE, KC_DOWN, XXXXXXX, XXXXXXX,
XXXXXXX, XXXXXXX, XXXXXXX, LWORD, RWORD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
),
[_DEL] = LAYOUT_ortho_5x10(
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
REMCAPS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
XXXXXXX, XXXXXXX, BLINE , KC_BSPC, BWORD , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
),
[_NUM] = LAYOUT_ortho_5x10(
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, NTAB,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_7, KC_8, KC_9, CTAB,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_4, KC_5, KC_6, KC_SCLN,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_1, KC_2, KC_3, KC_MINS,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_0, XXXXXXX, XXXXXXX
),
};