370 lines
11 KiB
C
370 lines
11 KiB
C
/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
|
|
* Copyright 2015 ZSA Technology Labs Inc (@zsa)
|
|
* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#include "ez.h"
|
|
#include <ch.h>
|
|
#include <hal.h>
|
|
|
|
keyboard_config_t keyboard_config;
|
|
#ifdef RGB_MATRIX_ENABLE
|
|
const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
|
|
/* Refer to IS31 manual for these locations
|
|
* driver
|
|
* | R location
|
|
* | | G location
|
|
* | | | B location
|
|
* | | | | */
|
|
{0, B_12, A_12, C_12},
|
|
{0, B_11, A_11, C_11},
|
|
{0, B_10, A_10, C_10},
|
|
{0, B_9, A_9, C_9},
|
|
{0, B_8, A_8, C_8},
|
|
{0, B_7, A_7, C_7},
|
|
|
|
{0, H_12, G_12, I_12},
|
|
{0, H_11, G_11, I_11},
|
|
{0, H_10, G_10, I_10},
|
|
{0, H_9, G_9, I_9},
|
|
{0, H_8, G_8, I_8},
|
|
{0, H_7, G_7, I_7},
|
|
|
|
{0, B_6, A_6, C_6},
|
|
{0, B_5, A_5, C_5},
|
|
{0, B_4, A_4, C_4},
|
|
{0, B_3, A_3, C_3},
|
|
{0, B_2, A_2, C_2},
|
|
{0, B_1, A_1, C_1},
|
|
|
|
{0, H_6, G_6, I_6},
|
|
{0, H_5, G_5, I_5},
|
|
{0, H_4, G_4, I_4},
|
|
{0, H_3, G_3, I_3},
|
|
{0, H_2, G_2, I_2},
|
|
{0, H_1, G_1, I_1},
|
|
|
|
{0, E_12, D_12, F_12},
|
|
{0, E_11, D_11, F_11},
|
|
{0, E_10, D_10, F_10},
|
|
{0, E_9, D_9, F_9},
|
|
{0, E_8, D_8, F_8},
|
|
{0, E_7, D_7, F_7},
|
|
|
|
{0, K_12, J_12, L_12},
|
|
{0, K_11, J_11, L_11},
|
|
{0, K_10, J_10, L_10},
|
|
{0, K_9, J_9, L_9},
|
|
{0, K_8, J_8, L_8},
|
|
{0, K_7, J_7, L_7},
|
|
|
|
{0, E_6, D_6, F_6},
|
|
{0, E_5, D_5, F_5},
|
|
{0, E_4, D_4, F_4},
|
|
{0, E_3, D_3, F_3},
|
|
{0, E_2, D_2, F_2},
|
|
{0, E_1, D_1, F_1},
|
|
|
|
{0, K_6, J_6, L_6},
|
|
{0, K_5, J_5, L_5},
|
|
{0, K_4, J_4, L_4},
|
|
{0, K_3, J_3, L_3},
|
|
{0, K_2, J_2, L_2},
|
|
|
|
};
|
|
|
|
led_config_t g_led_config = { {
|
|
{ 0, 1, 2, 3, 4, 5 },
|
|
{ 12, 13, 14, 15, 16, 17 },
|
|
{ 24, 25, 26, 27, 28, 29 },
|
|
{ 36, 37, 38, 45, 46, NO_LED },
|
|
{ 6, 7, 8, 9, 10, 11 },
|
|
{ 18, 19, 20, 21, 22, 23 },
|
|
{ 30, 31, 32, 33, 34, 35 },
|
|
{ 42, 43, 44, 39, 40, 41 }
|
|
}, {
|
|
{ 0, 0 }, { 20, 0 }, { 40, 0 }, { 61, 0 }, { 81, 0 }, { 101, 0 }, { 122, 0 }, { 142, 0 }, { 162, 0 }, { 183, 0 }, { 203, 0 }, { 223, 0 },
|
|
{ 0, 21 }, { 20, 21 }, { 40, 21 }, { 61, 21 }, { 81, 21 }, { 101, 21 }, { 122, 21 }, { 142, 21 }, { 162, 21 }, { 183, 21 }, { 203, 21 }, { 223, 21 },
|
|
{ 0, 42 }, { 20, 42 }, { 40, 42 }, { 61, 42 }, { 81, 42 }, { 101, 42 }, { 122, 42 }, { 142, 42 }, { 162, 42 }, { 183, 42 }, { 203, 42 }, { 223, 42 },
|
|
{ 0, 63 }, { 20, 63 }, { 40, 63 }, { 61, 63 }, { 81, 63 }, { 111, 63 }, { 142, 63 }, { 162, 63 }, { 183, 63 }, { 203, 63 }, { 223, 63 }
|
|
}, {
|
|
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
|
|
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
|
|
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
|
|
1, 1, 1, 1, 1, 4, 1, 1, 1, 1, 1
|
|
} };
|
|
|
|
#endif
|
|
|
|
/* Left B9 Right B8 */
|
|
|
|
// See http://jared.geek.nz/2013/feb/linear-led-pwm
|
|
static uint16_t cie_lightness(uint16_t v) {
|
|
if (v <= 5243) // if below 8% of max
|
|
return v / 9; // same as dividing by 900%
|
|
else {
|
|
uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
|
|
// to get a useful result with integer division, we shift left in the expression above
|
|
// and revert what we've done again after squaring.
|
|
y = y * y * y >> 8;
|
|
if (y > 0xFFFFUL) // prevent overflow
|
|
return 0xFFFFU;
|
|
else
|
|
return (uint16_t) y;
|
|
}
|
|
}
|
|
|
|
static PWMConfig pwmCFG = {
|
|
0xFFFF,/* PWM clock frequency */
|
|
256,/* initial PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
|
|
NULL,
|
|
{
|
|
{PWM_OUTPUT_DISABLED, NULL}, /* channel 0 -> TIM1-CH1 = PA8 */
|
|
{PWM_OUTPUT_DISABLED, NULL}, /* channel 1 -> TIM1-CH2 = PA9 */
|
|
{PWM_OUTPUT_ACTIVE_HIGH, NULL},
|
|
{PWM_OUTPUT_ACTIVE_HIGH, NULL}
|
|
},
|
|
0, /* HW dependent part.*/
|
|
0
|
|
};
|
|
|
|
static uint32_t planck_ez_right_led_duty;
|
|
static uint32_t planck_ez_left_led_duty;
|
|
|
|
void planck_ez_right_led_level(uint8_t level) {
|
|
planck_ez_right_led_duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t) level / 255));
|
|
if (level == 0) {
|
|
// Turn backlight off
|
|
pwmDisableChannel(&PWMD4, 2);
|
|
} else {
|
|
// Turn backlight on
|
|
pwmEnableChannel(&PWMD4, 2, PWM_FRACTION_TO_WIDTH(&PWMD4,0xFFFF,planck_ez_right_led_duty));
|
|
}
|
|
}
|
|
|
|
|
|
void planck_ez_right_led_on(void){
|
|
pwmEnableChannel(&PWMD4, 2, PWM_FRACTION_TO_WIDTH(&PWMD4,0xFFFF,planck_ez_right_led_duty));
|
|
}
|
|
|
|
void planck_ez_right_led_off(void){
|
|
pwmDisableChannel(&PWMD4, 2);
|
|
}
|
|
|
|
void planck_ez_left_led_level(uint8_t level) {
|
|
planck_ez_left_led_duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t) level / 255));
|
|
if (level == 0) {
|
|
// Turn backlight off
|
|
pwmDisableChannel(&PWMD4, 3);
|
|
} else {
|
|
// Turn backlight on
|
|
pwmEnableChannel(&PWMD4, 3, PWM_FRACTION_TO_WIDTH(&PWMD4,0xFFFF,planck_ez_left_led_duty));
|
|
}
|
|
}
|
|
|
|
void planck_ez_left_led_on(void){
|
|
pwmEnableChannel(&PWMD4, 3, PWM_FRACTION_TO_WIDTH(&PWMD4,0xFFFF,planck_ez_left_led_duty));
|
|
}
|
|
|
|
void planck_ez_left_led_off(void){
|
|
pwmDisableChannel(&PWMD4, 3);
|
|
}
|
|
|
|
|
|
void led_initialize_hardware(void) {
|
|
pwmStart(&PWMD4, &pwmCFG);
|
|
|
|
// set up defaults
|
|
planck_ez_right_led_level((uint8_t)keyboard_config.led_level * 255 / 4 );
|
|
palSetPadMode(GPIOB, 8, PAL_MODE_ALTERNATE(2));
|
|
planck_ez_left_led_level((uint8_t)keyboard_config.led_level * 255 / 4 );
|
|
palSetPadMode(GPIOB, 9, PAL_MODE_ALTERNATE(2));
|
|
|
|
|
|
// turn LEDs off by default
|
|
planck_ez_left_led_off();
|
|
planck_ez_right_led_off();
|
|
}
|
|
|
|
void keyboard_pre_init_kb(void) {
|
|
if (!eeconfig_is_enabled()) {
|
|
eeconfig_init();
|
|
}
|
|
// read kb settings from eeprom
|
|
keyboard_config.raw = eeconfig_read_kb();
|
|
#if defined(RGB_MATRIX_ENABLE) && defined(ORYX_CONFIGURATOR)
|
|
if (keyboard_config.rgb_matrix_enable) {
|
|
rgb_matrix_set_flags(LED_FLAG_ALL);
|
|
} else {
|
|
rgb_matrix_set_flags(LED_FLAG_NONE);
|
|
}
|
|
#endif
|
|
led_initialize_hardware();
|
|
keyboard_pre_init_user();
|
|
}
|
|
|
|
#if defined(RGB_MATRIX_ENABLE) && defined(ORYX_CONFIGURATOR)
|
|
void keyboard_post_init_kb(void) {
|
|
rgb_matrix_enable_noeeprom();
|
|
keyboard_post_init_user();
|
|
}
|
|
#endif
|
|
|
|
void eeconfig_init_kb(void) { // EEPROM is getting reset!
|
|
keyboard_config.raw = 0;
|
|
keyboard_config.rgb_matrix_enable = true;
|
|
keyboard_config.led_level = 4;
|
|
eeconfig_update_kb(keyboard_config.raw);
|
|
eeconfig_init_user();
|
|
}
|
|
|
|
|
|
#ifdef ORYX_CONFIGURATOR
|
|
|
|
#ifndef PLANCK_EZ_USER_LEDS
|
|
|
|
#ifndef PLANCK_EZ_LED_LOWER
|
|
# define PLANCK_EZ_LED_LOWER 3
|
|
#endif
|
|
#ifndef PLANCK_EZ_LED_RAISE
|
|
# define PLANCK_EZ_LED_RAISE 4
|
|
#endif
|
|
#ifndef PLANCK_EZ_LED_ADJUST
|
|
# define PLANCK_EZ_LED_ADJUST 6
|
|
#endif
|
|
|
|
layer_state_t layer_state_set_kb(layer_state_t state) {
|
|
planck_ez_left_led_off();
|
|
planck_ez_right_led_off();
|
|
state = layer_state_set_user(state);
|
|
uint8_t layer = get_highest_layer(state);
|
|
switch (layer) {
|
|
case PLANCK_EZ_LED_LOWER:
|
|
planck_ez_left_led_on();
|
|
break;
|
|
case PLANCK_EZ_LED_RAISE:
|
|
planck_ez_right_led_on();
|
|
break;
|
|
case PLANCK_EZ_LED_ADJUST:
|
|
planck_ez_right_led_on();
|
|
planck_ez_left_led_on();
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return state;
|
|
}
|
|
#endif
|
|
|
|
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
|
switch (keycode) {
|
|
case LED_LEVEL:
|
|
if (record->event.pressed) {
|
|
keyboard_config.led_level++;
|
|
if (keyboard_config.led_level > 4) {
|
|
keyboard_config.led_level = 0;
|
|
}
|
|
planck_ez_right_led_level((uint8_t)keyboard_config.led_level * 255 / 4 );
|
|
planck_ez_left_led_level((uint8_t)keyboard_config.led_level * 255 / 4 );
|
|
eeconfig_update_kb(keyboard_config.raw);
|
|
layer_state_set_kb(layer_state);
|
|
}
|
|
break;
|
|
#ifdef RGB_MATRIX_ENABLE
|
|
case TOGGLE_LAYER_COLOR:
|
|
if (record->event.pressed) {
|
|
keyboard_config.disable_layer_led ^= 1;
|
|
if (keyboard_config.disable_layer_led)
|
|
rgb_matrix_set_color_all(0, 0, 0);
|
|
eeconfig_update_kb(keyboard_config.raw);
|
|
}
|
|
break;
|
|
case RGB_TOG:
|
|
if (record->event.pressed) {
|
|
switch (rgb_matrix_get_flags()) {
|
|
case LED_FLAG_ALL: {
|
|
rgb_matrix_set_flags(LED_FLAG_NONE);
|
|
keyboard_config.rgb_matrix_enable = false;
|
|
rgb_matrix_set_color_all(0, 0, 0);
|
|
}
|
|
break;
|
|
default: {
|
|
rgb_matrix_set_flags(LED_FLAG_ALL);
|
|
keyboard_config.rgb_matrix_enable = true;
|
|
}
|
|
break;
|
|
}
|
|
eeconfig_update_kb(keyboard_config.raw);
|
|
}
|
|
return false;
|
|
#endif
|
|
}
|
|
return process_record_user(keycode, record);
|
|
}
|
|
#endif
|
|
|
|
#ifdef AUDIO_ENABLE
|
|
bool music_mask_kb(uint16_t keycode) {
|
|
switch (keycode) {
|
|
case QK_LAYER_TAP ... QK_LAYER_TAP_MAX:
|
|
case QK_TO ... QK_TO_MAX:
|
|
case QK_MOMENTARY ... QK_MOMENTARY_MAX:
|
|
case QK_DEF_LAYER ... QK_DEF_LAYER_MAX:
|
|
case QK_TOGGLE_LAYER ... QK_TOGGLE_LAYER_MAX:
|
|
case QK_ONE_SHOT_LAYER ... QK_ONE_SHOT_LAYER_MAX:
|
|
case QK_LAYER_TAP_TOGGLE ... QK_LAYER_TAP_TOGGLE_MAX:
|
|
case QK_LAYER_MOD ... QK_LAYER_MOD_MAX:
|
|
case QK_ONE_SHOT_MOD ... QK_ONE_SHOT_MOD_MAX:
|
|
case QK_MOD_TAP ... QK_MOD_TAP_MAX:
|
|
case AU_ON ... AU_PREV:
|
|
case QK_BOOT:
|
|
case QK_CLEAR_EEPROM:
|
|
return false;
|
|
default:
|
|
return music_mask_user(keycode);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef SWAP_HANDS_ENABLE
|
|
__attribute__ ((weak))
|
|
const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
|
|
{{5, 4}, {4, 4}, {3, 4}, {2, 4}, {1, 4}, {0, 4}},
|
|
{{5, 5}, {4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}},
|
|
{{5, 6}, {4, 6}, {3, 6}, {2, 6}, {1, 6}, {0, 6}},
|
|
{{5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}},
|
|
|
|
{{5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},
|
|
{{5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}},
|
|
{{5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}},
|
|
{{5, 7}, {4, 7}, {3, 7}, {2, 7}, {1, 7}, {0, 7}},
|
|
};
|
|
|
|
# ifdef ENCODER_MAP_ENABLE
|
|
const uint8_t PROGMEM encoder_hand_swap_config[NUM_ENCODERS] = {0};
|
|
# endif
|
|
#endif
|
|
|
|
const uint8_t music_map[MATRIX_ROWS][MATRIX_COLS] = {
|
|
{36, 37, 38, 39, 40, 41},
|
|
{24, 25, 26, 27, 28, 29},
|
|
{12, 13, 14, 15, 16, 17},
|
|
{ 0, 1, 2, 10, 11, 6},
|
|
{42, 43, 44, 45, 46, 47},
|
|
{30, 31, 32, 33, 34, 35},
|
|
{18, 19, 20, 21, 22, 23},
|
|
{ 7, 8, 9, 3, 4, 5}
|
|
};
|