qmk_firmware/keyboards/sawnsprojects/amber80
Ryan 4ae9bfd17a
Move RGBLIGHT_HUE/SAT/VAL_STEP to data driven (#21292)
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-06-24 17:37:54 +10:00
..
solder Move RGBLIGHT_HUE/SAT/VAL_STEP to data driven (#21292) 2023-06-24 17:37:54 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00

Amber80 solder

A TKL keyboard sold in several variants.

  1. Solder: 1/2022. Atmega32u4 soldered keyboard. Sold under the name "Amber80" with Amber80 keyboard case. Compatible with Amber80 keyboard case.

Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other. Please use the .hex or .bin appropriate for your board.

  • Keyboard Maintainer: SawnsProjects
  • Hardware Supported: Amber80
  • Hardware Availability: Comming Soon

Make examples for this keyboard (after setting up your build environment):

make sawnsprojects/amber80/solder:default

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.