qmk_firmware/keyboards/sawnsprojects/krush/krush60
Ryan 4ae9bfd17a
Move RGBLIGHT_HUE/SAT/VAL_STEP to data driven (#21292)
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-06-24 17:37:54 +10:00
..
solder Move RGBLIGHT_HUE/SAT/VAL_STEP to data driven (#21292) 2023-06-24 17:37:54 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00

Krush60

A 60% keyboard sold in several variants.

  1. Solder: 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush60" with krush keyboard case. Compatible with some 60% case, Singa, Bakeneko.

Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other. Please use the .hex or .bin appropriate for your board.

  • Keyboard Maintainer: SawnsProjects
  • Hardware Supported: Krush60, SINGA, Bakeneko, 60% traymount case
  • Hardware Availability: Mechkey.store

Make examples for this keyboard (after setting up your build environment):

make sawnsprojects/krush/krush60/solder:default

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.