qmk_firmware/keyboards/work_louder/nano/config.h
Drashna Jaelre 956cf8d7bf
[Keyboard] Work Louder board fixup (#14247)
* [Keyboard] Add some last minute tweaks to Work board

* Additional fixes

* Fix rgb pin

* Fix ws2812 hackery

* additional led tweaks

* Add indicator LEDs

* fix bootmagic settings

* Fix up RGB stuff

* Limit power draw for entire board

* fixup lights and such

* change LED order on loop

* Fix indicators if via is not enabled

* Enable Sleep for rgb matrix

* Even more LED tweaks

* Final tweaks?

* Tweak keycodes
2021-09-02 10:49:44 -07:00

171 lines
5.0 KiB
C

/*
Copyright 2021 Drashna Jael're
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x574C
#define PRODUCT_ID 0xE6EF
#define DEVICE_VER 0x0001
#define MANUFACTURER Work Louder
#define PRODUCT Nano Pad
/* key matrix size */
#define MATRIX_ROWS 1
#define MATRIX_COLS 5
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS \
{ F7 }
#define MATRIX_COL_PINS \
{ B5, B6, C6, NO_PIN, NO_PIN }
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
//#define LED_NUM_LOCK_PIN B0
//#define LED_CAPS_LOCK_PIN B1
//#define LED_SCROLL_LOCK_PIN B2
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define BACKLIGHT_PIN B7
//#define BACKLIGHT_LEVELS 3
//#define BACKLIGHT_BREATHING
#define RGBLIGHT_DI_PIN C7
#define RGBLED_NUM 6
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 120 /* The maximum brightness level */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== or choose animations ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
#define RGBLIGHT_EFFECT_SNAKE
#define RGBLIGHT_EFFECT_KNIGHT
#define RGBLIGHT_EFFECT_CHRISTMAS
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_STATIC_LIGHT
#define RGBLIGHT_DEFAULT_HUE 170
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
#define RGB_DI_PIN F6
#define DRIVER_LED_TOTAL 2
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120
#define RGB_MATRIX_DISABLE_KEYCODES
#define RGB_DISABLE_WHEN_USB_SUSPENDED
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
// #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
// #define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
*/
//#define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
/* Bootmagic Lite key configuration */
#define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 2
#define ENCODERS_PAD_A \
{ D7 }
#define ENCODERS_PAD_B \
{ B4 }
#define ENCODERS 1
#define ENCODERS_CW_KEY \
{ \
{ 3, 0 } \
}
#define ENCODERS_CCW_KEY \
{ \
{ 4, 0 } \
}