qmk_firmware/keyboards/box75
Ryan 9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps [Keyboard] Box75 (#10949) 2020-12-16 21:26:03 -08:00
box75.c [Keyboard] Box75 (#10949) 2020-12-16 21:26:03 -08:00
box75.h [Keyboard] Box75 (#10949) 2020-12-16 21:26:03 -08:00
chconf.h ChibiOS conf migrations... take 11 (#11646) 2021-01-21 17:00:53 +11:00
config.h [Keyboard] Box75 (#10949) 2020-12-16 21:26:03 -08:00
info.json box75: fix key positioning in info.json (#12256) 2021-03-16 00:00:59 -07:00
mcuconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
readme.md [Keyboard] Box75 (#10949) 2020-12-16 21:26:03 -08:00
rules.mk Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00

BOX75 QMK firmware folder

Introduction

This is the QMK firmware repository for the BOX75, a keyboard designed by Lin Design Studio. The PCB was designed by Gondolindrim.

The BOX75 is a 75% keyboard featuring a sleek exterior inspired by modern architecture. It supports MX-type switches only with no lighting options. Layout-wise, the BOX75 supports ISO layouts, split backspace and split right shift and three bottom row options (6u, 6.25u, 7u).

As of november 2020, the only way to obtain a BOX75 is through the still upcoming Group Buy on Novelkeys.

How to compile

After setting up your build environment, you can compile the BOX75 default keymap by using:

make box75:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.