qmk_firmware/keyboards/pica40
2023-04-06 18:00:54 +10:00
..
keymaps Make IGNORE_MOD_TAP_INTERRUPT the default behaviour for mod-taps (#20211) 2023-04-03 15:32:47 +10:00
rev1 Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
rev2 Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
info.json [Keyboard] Add Pica40 (#19220) 2022-12-30 11:53:31 +11:00
readme.md [Keyboard] Add Pica40 (#19220) 2022-12-30 11:53:31 +11:00
rules.mk [Keyboard] Add Pica40 (#19220) 2022-12-30 11:53:31 +11:00

pica40

pica40

A family of 40-key split ortholinear keyboards with rotary encoder.

  • Keyboard Maintainer: zzeneg
  • Hardware Supported: Pica40 PCBs, Pro Micro (rev1), XIAO RP2040/nRF52840 (rev2)
  • Hardware Availability: GitHub

Make example for this keyboard (after setting up your build environment):

make pica40:default
make pica40/rev1:default

Flashing example for this keyboard:

make pica40:default:flash
make pica40/rev1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available