qmk_firmware/keyboards/clueboard/66/rev4/rev4.c
2020-01-27 17:38:47 +11:00

77 lines
1.9 KiB
C

#include "rev4.h"
//#include "backlight.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
led_init_ports();
}
void matrix_scan_kb(void) {
matrix_scan_user();
}
void backlight_init_ports(void) {
print("init_backlight_pin()\n");
// Set our LED pins as output
//DDRD |= (1<<6); // Esc
//DDRB |= (1<<7); // Page Up
//DDRD |= (1<<4); // Arrows
// Set our LED pins low
//PORTD &= ~(1<<6); // Esc
//PORTB &= ~(1<<7); // Page Up
//PORTD &= ~(1<<4); // Arrows
}
void backlight_set(uint8_t level) {
/*
if ( level == 0 ) {
// Turn off light
PORTD |= (1<<6); // Esc
PORTB |= (1<<7); // Page Up
PORTD |= (1<<4); // Arrows
} else {
// Turn on light
PORTD &= ~(1<<6); // Esc
PORTB &= ~(1<<7); // Page Up
PORTD &= ~(1<<4); // Arrows
}
*/
}
void led_init_ports() {
// Set our LED pins as output
palSetPadMode(GPIOB, 13, PAL_MODE_OUTPUT_PUSHPULL); // LED1
palClearPad(GPIOB, 13);
palSetPadMode(GPIOB, 14, PAL_MODE_OUTPUT_PUSHPULL); // LED2
palClearPad(GPIOB, 14);
palSetPadMode(GPIOA, 8, PAL_MODE_OUTPUT_PUSHPULL); // LED3
palClearPad(GPIOA, 8);
palSetPadMode(GPIOA, 0, PAL_MODE_OUTPUT_PUSHPULL); // Capslock LED
palClearPad(GPIOA, 0);
}
void led_set_kb(uint8_t usb_led) {
if (usb_led & (1<<USB_LED_NUM_LOCK)) {
palSetPad(GPIOB, 13); // LED1
} else {
palClearPad(GPIOB, 13); // LED1
}
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
palSetPad(GPIOA, 0); // Capslock LED
palSetPad(GPIOB, 14); // LED2
} else {
palClearPad(GPIOA, 0); // Capslock LED
palClearPad(GPIOB, 14); // LED2
}
if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
palSetPad(GPIOA, 8); // LED3
} else {
palClearPad(GPIOA, 8); // LED3
}
}