qmk_firmware/keyboards/sets3n/kk980
2023-02-17 16:08:25 +11:00
..
keymaps Reworked backlight keycodes. (#18961) 2022-11-06 08:11:59 +11:00
config.h Remove matrix size defines (#19581) 2023-02-17 16:08:25 +11:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
kk980.c [Keyboard] add kk980 keyboard (#14436) 2021-09-21 23:38:07 -07:00
kk980.h Sets3n kk980 Layout Macro Refactor (#15039) 2021-11-03 16:31:07 +00:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

kk980

kk980

A hotswap 98% RGB Mechanical keyboard.

  • Keyboard Maintainer: sets3n
  • Hardware Supported: kk980 PCB
  • Hardware Availability: -

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

HEX

Make example for this keyboard (after setting up your build environment):

make sets3n/kk980:default

FLASH

Flashing example for this keyboard:

make sets3n/kk980:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.