qmk_firmware/keyboards/misterknife/knife66_iso/config.h
Thierry Michel Philippe Kleist 3e3f93c971
[Keyboard] misterknife/knife66_iso (#11010)
* feat: added new variant of knife66
2020-12-23 17:07:56 -08:00

56 lines
1.9 KiB
C

/*
Copyright 2020 Thierry Kleist
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xAC11
#define PRODUCT_ID 0x4173
#define DEVICE_VER 0x0001
#define MANUFACTURER MisterKnife
#define PRODUCT Knife66 ISO
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
#define MATRIX_COL_PINS { B2, B1, B0, A7, A6, A5, A4, B9, B8, B7, B6, B5, B4, B3, A15 }
#define MATRIX_ROW_PINS { B15, A8, A3, A2, A1 }
#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN A9
#ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLIGHT_SLEEP
#define RGBLED_NUM 6
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 160
#endif
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
#define WS2812_PWM_DRIVER PWMD1 // default: PWMD1
#define WS2812_PWM_CHANNEL 2 // default: 2
#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
#define WS2812_DMA_STREAM STM32_DMA1_STREAM5 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
#define WS2812_DMA_CHANNEL 5 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.