qmk_firmware/keyboards/splitkb/zima/config.h
2021-07-25 18:18:39 -07:00

93 lines
2.8 KiB
C

/*
Copyright 2019 Thomas Baart
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x8D1D
#define PRODUCT_ID 0xF75B
#define DEVICE_VER 0x0001
#define MANUFACTURER splitkb
#define PRODUCT Zima
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 3
/*
* Keyboard Matrix Assignments
*/
#define DIRECT_PINS { \
{ C6, D6, D5 }, \
{ C7, F7, D4 }, \
{ E6, F5, F6 }, \
{ F0, F1, F4 }, \
}
#define UNUSED_PINS
#define ENCODERS_PAD_A { B4 }
#define ENCODERS_PAD_B { D7 }
// #define QMK_ESC_OUTPUT B7
// #define QMK_ESC_INPUT C6
// #define QMK_SPEAKER B6
#define AUDIO_PIN B6
#define AUDIO_CLICKY
#define NO_MUSIC_MODE
#define RGB_DI_PIN B5
#define RGBLED_NUM 5
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_TWINKLE
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
// #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
// #define LOCKING_RESYNC_ENABLE
#define FB_ERM_LRA 0
#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
/* Please refer to your datasheet for the optimal setting for your specific motor. */
#define RATED_VOLTAGE 3
#define V_PEAK 5
#define DRV_GREETING alert_750ms
#define DRV_MODE_DEFAULT buzz
// EC11K encoders have a different resolution than other EC11 encoders.
// When using the default resolution of 4, if you notice your encoder skipping
// every other tick, lower the resolution to 2.
#define ENCODER_RESOLUTION 2