qmk_firmware/keyboards/owlab/jelly_epoch/hotswap
2021-09-12 14:04:56 +10:00
..
keymaps [Keyboard] Add OwLab Jelly Epoch (#14190) 2021-08-30 11:29:15 -07:00
config.h [Keyboard] Add OwLab Jelly Epoch (#14190) 2021-08-30 11:29:15 -07:00
hotswap.c [Keyboard] Add OwLab Jelly Epoch (#14190) 2021-08-30 11:29:15 -07:00
hotswap.h [Keyboard] Add OwLab Jelly Epoch (#14190) 2021-08-30 11:29:15 -07:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md [Keyboard] Add OwLab Jelly Epoch (#14190) 2021-08-30 11:29:15 -07:00
rules.mk Remove bootloader listings from rules.mk (#14330) 2021-09-10 13:35:46 +10:00

Jelly Epoch - hotswap PCB

jelly

A 75% made by Owlab.

Make example for this keyboard (after setting up your build environment):

make owlab/jelly_epoch/hotswap:default

Flashing example for this keyboard:

make owlab/jelly_epoch/hotswap:default:flash

Bootloader: Press the physical reset button on the bottom side of the PCB (labeled SW1) or hold down ESC while plugging in the board.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.