qmk_firmware/keyboards/keygem/kg65rgbv2
2023-04-06 18:00:54 +10:00
..
keymaps Remove legacy Grave Escape keycodes (#18787) 2022-10-20 18:04:11 -07:00
config.h Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
info.json Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
readme.md [Keyboard] Add KG60 and KG65 (#17565) 2022-09-28 12:20:26 -07:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

Keygem KG65 RGB V2

The following is the QMK Firmware for the FJLabs TF65 RGB V2 PCB, a universal tray mount 65% hotswap PCB with per key RGB LED's.

The PCB will feature:

  • Kailh Hotswap sockets

  • QMK & VIA compatibility

  • Per-Key RGB LED's

  • Keyboard Maintainer: Keygem

  • Hardware Supported: KG65 RGB V2

Make example for this keyboard (after setting up your build environment):

make keygem/kg65rgbv2:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available