qmk_firmware/LUFA/Drivers/USB/Core/USBMode.h
Jack Humbert 60b30c0363 Squashed 'lib/lufa/' content from commit 385d40300
git-subtree-dir: lib/lufa
git-subtree-split: 385d4030035dbaf41591309dbde47653bd03841b
2017-07-07 11:55:23 -04:00

284 lines
10 KiB
C

/*
LUFA Library
Copyright (C) Dean Camera, 2017.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
* \brief USB mode and feature support definitions.
* \copydetails Group_USBMode
*
* \note This file should not be included directly. It is automatically included as needed by the USB driver
* dispatch header located in LUFA/Drivers/USB/USB.h.
*/
/** \ingroup Group_USB
* \defgroup Group_USBMode USB Mode Tokens
* \brief USB mode and feature support definitions.
*
* This file defines macros indicating the type of USB controller the library is being compiled for, and its
* capabilities. These macros may then be referenced in the user application to selectively enable or disable
* code sections depending on if they are defined or not.
*
* After the inclusion of the master USB driver header, one or more of the following tokens may be defined, to
* allow the user code to conditionally enable or disable code based on the USB controller family and allowable
* USB modes. These tokens may be tested against to eliminate code relating to a USB mode which is not enabled for
* the given compilation.
*
* @{
*/
#ifndef __USBMODE_H__
#define __USBMODE_H__
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
#endif
/* Preprocessor Checks: */
#if !defined(__INCLUDE_FROM_USB_DRIVER)
#error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
#endif
/* Includes: */
#include "../../../Common/Common.h"
/* Public Interface - May be used in end-application: */
#if defined(__DOXYGEN__)
/** Indicates that the target AVR microcontroller belongs to the Series 2 AVR8 USB controller
* (i.e. AT90USBxxx2 or ATMEGAxxU2) when defined.
*/
#define USB_SERIES_2_AVR
/** Indicates that the target AVR microcontroller belongs to the Series 4 AVR8 USB controller
* (i.e. ATMEGAxxU4) when defined.
*/
#define USB_SERIES_4_AVR
/** Indicates that the target AVR microcontroller belongs to the Series 6 AVR8 USB controller
* (i.e. AT90USBxxx6) when defined.
*/
#define USB_SERIES_6_AVR
/** Indicates that the target AVR microcontroller belongs to the Series 7 AVR8 USB controller
* (i.e. AT90USBxxx7) when defined.
*/
#define USB_SERIES_7_AVR
/** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A0 Series USB controller
* (i.e. AT32UC3A0*) when defined.
*/
#define USB_SERIES_UC3A0_AVR
/** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A1 Series USB controller
* (i.e. AT32UC3A1*) when defined.
*/
#define USB_SERIES_UC3A1_AVR
/** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A3 Series USB controller
* (i.e. AT32UC3A3*) when defined.
*/
#define USB_SERIES_UC3A3_AVR
/** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A4 Series USB controller
* (i.e. AT32UC3A4*) when defined.
*/
#define USB_SERIES_UC3A4_AVR
/** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B0 Series USB controller
* (i.e. AT32UC3B0*) when defined.
*/
#define USB_SERIES_UC3B0_AVR
/** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B1 Series USB controller
* (i.e. AT32UC3B1*) when defined.
*/
#define USB_SERIES_UC3B1_AVR
/** Indicates that the target AVR microcontroller belongs to the XMEGA A1U Series USB controller
* (i.e. ATXMEGA*A1U) when defined.
*/
#define USB_SERIES_A1U_XMEGA
/** Indicates that the target AVR microcontroller belongs to the XMEGA A3U Series USB controller
* (i.e. ATXMEGA*A3U) when defined.
*/
#define USB_SERIES_A3U_XMEGA
/** Indicates that the target AVR microcontroller belongs to the XMEGA A4U Series USB controller
* (i.e. ATXMEGA*A4U) when defined.
*/
#define USB_SERIES_A4U_XMEGA
/** Indicates that the target AVR microcontroller belongs to the XMEGA B1 Series USB controller
* (i.e. ATXMEGA*B1) when defined.
*/
#define USB_SERIES_B1_XMEGA
/** Indicates that the target AVR microcontroller belongs to the XMEGA B3 Series USB controller
* (i.e. ATXMEGA*B3) when defined.
*/
#define USB_SERIES_B3_XMEGA
/** Indicates that the target AVR microcontroller belongs to the XMEGA C3 Series USB controller
* (i.e. ATXMEGA*C3) when defined.
*/
#define USB_SERIES_C3_XMEGA
/** Indicates that the target AVR microcontroller belongs to the XMEGA C4 Series USB controller
* (i.e. ATXMEGA*C4) when defined.
*/
#define USB_SERIES_C4_XMEGA
/** Indicates that the target microcontroller and compilation settings allow for the
* target to be configured in USB Device mode when defined.
*/
#define USB_CAN_BE_DEVICE
/** Indicates that the target microcontroller and compilation settings allow for the
* target to be configured in USB Host mode when defined.
*/
#define USB_CAN_BE_HOST
/** Indicates that the target microcontroller and compilation settings allow for the
* target to be configured in either USB Device or Host mode when defined.
*/
#define USB_CAN_BE_BOTH
#else
/* Macros: */
#if (defined(__AVR_AT90USB162__) || defined(__AVR_AT90USB82__) || \
defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__))
#define USB_SERIES_2_AVR
#define USB_CAN_BE_DEVICE
#elif (defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__))
#define USB_SERIES_4_AVR
#define USB_CAN_BE_DEVICE
#elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
#define USB_SERIES_6_AVR
#define USB_CAN_BE_DEVICE
#elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__))
#define USB_SERIES_7_AVR
#define USB_CAN_BE_DEVICE
#define USB_CAN_BE_HOST
#elif (defined(__AVR32_UC3A0512__) || defined(__AVR32_UC3A0256__) || \
defined(__AVR32_UC3A0128__) || defined(__AVR32_UC3A064__))
#define USB_SERIES_UC3A0_AVR32
#define USB_CAN_BE_DEVICE
#define USB_CAN_BE_HOST
#elif (defined(__AVR32_UC3A1512__) || defined(__AVR32_UC3A1256__) || \
defined(__AVR32_UC3A1128__) || defined(__AVR32_UC3A164__))
#define USB_SERIES_UC3A1_AVR32
#define USB_CAN_BE_DEVICE
#define USB_CAN_BE_HOST
#elif (defined(__AVR32_UC3A3256__) || defined(__AVR32_UC3A3256S__) || \
defined(__AVR32_UC3A3128__) || defined(__AVR32_UC3A3128S__) || \
defined(__AVR32_UC3A364__) || defined(__AVR32_UC3A364S__))
#define USB_SERIES_UC3A3_AVR32
#define USB_CAN_BE_DEVICE
#define USB_CAN_BE_HOST
#elif (defined(__AVR32_UC3A4256__) || defined(__AVR32_UC3A4256S__) || \
defined(__AVR32_UC3A4128__) || defined(__AVR32_UC3A4128S__) || \
defined(__AVR32_UC3A464__) || defined(__AVR32_UC3A464S__))
#define USB_SERIES_UC3A4_AVR32
#define USB_CAN_BE_DEVICE
#define USB_CAN_BE_HOST
#elif (defined(__AVR32_UC3B0512__) || defined(__AVR32_UC3B0256__) || \
defined(__AVR32_UC3B0128__) || defined(__AVR32_UC3B064__))
#define USB_SERIES_UC3B0_AVR32
#define USB_CAN_BE_DEVICE
#define USB_CAN_BE_HOST
#elif (defined(__AVR32_UC3B1512__) || defined(__AVR32_UC3B1256__) || \
defined(__AVR32_UC3B1128__) || defined(__AVR32_UC3B164__))
#define USB_SERIES_UC3B1_AVR32
#define USB_CAN_BE_DEVICE
#define USB_CAN_BE_HOST
#elif (defined(__AVR_ATxmega128A1U__) || defined(__AVR_ATxmega64A1U__))
#define USB_SERIES_A1U_XMEGA
#define USB_CAN_BE_DEVICE
#elif (defined(__AVR_ATxmega64A3U__) || defined(__AVR_ATxmega128A3U__) || \
defined(__AVR_ATxmega192A3U__) || defined(__AVR_ATxmega256A3U__))
#define USB_SERIES_A3U_XMEGA
#define USB_CAN_BE_DEVICE
#elif (defined(__AVR_ATxmega256A3BU__))
#define USB_SERIES_A3BU_XMEGA
#define USB_CAN_BE_DEVICE
#elif (defined(__AVR_ATxmega16A4U__) || defined(__AVR_ATxmega32A4U__) || \
defined(__AVR_ATxmega64A4U__) || defined(__AVR_ATxmega128A4U__))
#define USB_SERIES_A4U_XMEGA
#define USB_CAN_BE_DEVICE
#elif (defined(__AVR_ATxmega128B1__) || defined(__AVR_ATxmega64B1__))
#define USB_SERIES_B1_XMEGA
#define USB_CAN_BE_DEVICE
#elif (defined(__AVR_ATxmega128B3__) || defined(__AVR_ATxmega64B3__))
#define USB_SERIES_B3_XMEGA
#define USB_CAN_BE_DEVICE
#elif (defined(__AVR_ATxmega128C3__) || defined(__AVR_ATxmega64C3__) || \
defined(__AVR_ATxmega192C3__) || defined(__AVR_ATxmega256C3__) || \
defined(__AVR_ATxmega384C3__))
#define USB_SERIES_C3_XMEGA
#define USB_CAN_BE_DEVICE
#elif (defined(__AVR_ATxmega16C4__) || defined(__AVR_ATxmega32C4__))
#define USB_SERIES_C4_XMEGA
#define USB_CAN_BE_DEVICE
#endif
#if (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY))
#error USB_HOST_ONLY and USB_DEVICE_ONLY are mutually exclusive.
#elif defined(USB_HOST_ONLY)
#if !defined(USB_CAN_BE_HOST)
#error USB_HOST_ONLY is not available for the currently selected microcontroller model.
#else
#undef USB_CAN_BE_DEVICE
#endif
#elif defined(USB_DEVICE_ONLY)
#if !defined(USB_CAN_BE_DEVICE)
#error USB_DEVICE_ONLY is not available for the currently selected microcontroller model.
#else
#undef USB_CAN_BE_HOST
#endif
#endif
#if (defined(USB_CAN_BE_DEVICE) && defined(USB_CAN_BE_HOST))
#define USB_CAN_BE_BOTH
#endif
#if (!defined(USB_CAN_BE_DEVICE) && !defined(USB_CAN_BE_HOST))
#error The currently selected device, USB mode or architecture is not supported.
#endif
#endif
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif
#endif
/** @} */