qmk_firmware/keyboards/sirius/unigo66/main.c
Daniel H Klein 9ae800fab3 [Keyboard] UniGo66 keyboard added (#4913)
* UniGo66 keyboard added

* UniGo66 keyboard added

* case correction of unigo66 files

* create sirius folder

* Update keyboards/sirius/unigo66/rules.mk

Co-Authored-By: danielhklein <danielklein@utexas.edu>

* Update keyboards/sirius/unigo66/keymaps/danielhklein/keymap.c

Co-Authored-By: danielhklein <danielklein@utexas.edu>

* Update keyboards/sirius/unigo66/keymaps/default/config.h

Co-Authored-By: danielhklein <danielklein@utexas.edu>

* Update keyboards/sirius/unigo66/keymaps/danielhklein/config.h

Co-Authored-By: danielhklein <danielklein@utexas.edu>

* debugging

* correct keymap to layout

* readme

* remove common config

* suggested changes to config.h

* default keymap cleanup
2019-01-27 00:12:05 -08:00

109 lines
2.2 KiB
C

#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <util/delay.h>
// LUFA
#include "lufa.h"
#include "sendchar.h"
#include "debug.h"
#include "keyboard.h"
#include "led.h"
/* LED ping configuration */
#define TMK_LED
//#define LEONARDO_LED
#if defined(TMK_LED)
// For TMK converter and Teensy
#define LED_TX_INIT (DDRD |= (1<<6))
#define LED_TX_ON (PORTD |= (1<<6))
#define LED_TX_OFF (PORTD &= ~(1<<6))
#define LED_TX_TOGGLE (PORTD ^= (1<<6))
#elif defined(LEONARDO_LED)
// For Leonardo(TX LED)
#define LED_TX_INIT (DDRD |= (1<<5))
#define LED_TX_ON (PORTD &= ~(1<<5))
#define LED_TX_OFF (PORTD |= (1<<5))
#define LED_TX_TOGGLE (PORTD ^= (1<<5))
#else
#define LED_TX_INIT
#define LED_TX_ON
#define LED_TX_OFF
#define LED_TX_TOGGLE
#endif
static void LUFA_setup(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
#if (F_CPU == 8000000)
clock_prescale_set(clock_div_2); // 16MHz crystal divided by 2
#else
clock_prescale_set(clock_div_1);
#endif
// Leonardo needs. Without this USB device is not recognized.
USB_Disable();
USB_Init();
// for Console_Task
USB_Device_EnableSOFEvents();
print_set_sendchar(sendchar);
}
int main(void)
{
// LED for debug
LED_TX_INIT;
LED_TX_ON;
debug_enable = true;
debug_keyboard = true;
host_set_driver(&lufa_driver);
keyboard_init();
LUFA_setup();
/* NOTE: Don't insert time consuming job here.
* It'll cause unclear initialization failure when DFU reset(worm start).
*/
sei();
/* Some keyboards bootup quickly and cannot be initialized with this startup wait.*/
// wait for startup of sendchar routine
while (USB_DeviceState != DEVICE_STATE_Configured) ;
if (debug_enable) {
_delay_ms(1000);
}
/* // wait for USB startup & debug output
uint8_t timeout=255
while (timeout-- && USB_DeviceState != DEVICE_STATE_Configured) {
wait_ms(4);
*/
debug("init: done\n");
for (;;) {
keyboard_task();
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
// LUFA Task for control request
USB_USBTask();
#endif
}
return 0;
}