qmk_firmware/keyboards/handwired/onekey/teensy_lc
Ryan 66d7fc34b2
Add Arm Teensys to mcu_selection.mk (#8026)
* Add Arm Teensys to mcu_selection.mk

* Roll back halfkeyboard keymap changes

* Remove extra newline
2020-02-21 17:12:15 +11:00
..
chconf.h Move CORTEX_ENABLE_WFI_IDLE=TRUE to rules.mk files. 2020-01-28 23:45:42 +11:00
config.h [Keyboard] Refactor of onekey to support multiple development boards (#6017) 2019-06-26 10:52:09 -07:00
halconf.h [Keyboard] Refactor of onekey to support multiple development boards (#6017) 2019-06-26 10:52:09 -07:00
mcuconf.h [Keyboard] Refactor of onekey to support multiple development boards (#6017) 2019-06-26 10:52:09 -07:00
readme.md [Keyboard] Refactor of onekey to support multiple development boards (#6017) 2019-06-26 10:52:09 -07:00
rules.mk Add Arm Teensys to mcu_selection.mk (#8026) 2020-02-21 17:12:15 +11:00

Teensy LC onekey

To trigger keypress, short together pins D5 and B2 (marked on the PCB as 20 and 19).

Hardware

Pins

When setting matrix pins, you need to use the MCU definitions instead of what is printed on the PCB. Sourced from https://www.pjrc.com/teensy/schematic_lc.gif. The following table can be used to convert between the two.

PCB MCU Notes
0 B16
1 B17
2 D0
3 A1
4 A2
5 D7
6 D4
7 D2
8 D3
9 C3
10 C4
11 C6
12 C7
13/LED C5
14/A0 D1
15/A1 C0
16/A2 B0
17/A3 B1
18/A4 B3
19/A5 B2
20/A6 D5
21/A7 D6
22/A8 C1
23/A9 C2
24/A10 E2
25/A11 E21 [1]
26/A12 E30 [1]

[1] - Currently not configured and may require extra work to implement.