qmk_firmware/keyboards/rart/rart80
Ryan 363bfdbfda
Move RGBLIGHT_LIMIT_VAL to data driven (#20974)
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-05-27 12:27:44 +10:00
..
keymaps rart/rart80:via: restore rules.mk after #20334 (#21002) 2023-05-20 19:51:26 +01:00
config.h Move RGBLIGHT_LIMIT_VAL to data driven (#20974) 2023-05-27 12:27:44 +10:00
info.json Move RGBLIGHT_LIMIT_VAL to data driven (#20974) 2023-05-27 12:27:44 +10:00
matrix_diagram.md RART80 Hotswap Layout Additions (#20791) 2023-05-08 19:46:20 -07:00
readme.md [Keyboard] add rart80 (#18287) 2022-09-28 12:23:17 -07:00
rules.mk Add sriwedari70 and move kamigakushi to new folder (#20334) 2023-05-20 22:10:13 +10:00

[RART 80 Hotswap]

RART 80

PCB layout TKL, based on IMKG (Indonesia Mechanical Keyboard Group)

  • Keyboard Maintainer: Alabahuy
  • Hardware Supported: RART80 PCB, Atmega32a, Type C
  • Hardware Availability: Private GB

Make example for this keyboard (after setting up your build environment):

make rart/rart80:default

Flashing example for this keyboard:

make rart/rart80:default:flash

Bootloader

Enter the bootloader in 3 ways:

  • To Enter the bootloader you can short and hold boot pin, short reset pin, release reset and boot pin.

  • Bootmagic reset, hold down the key at (0,0) in the matrix (ESC) and plug in the keyboard.

  • Bootloader reset on the matrix, hold down key at (0,1) and plug in the keyboard

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.