qmk_firmware/keyboards/aeboards/ext65/rev2/config.h
Xelus22 c957eed04b
[Keyboard] AEboards Ext65 rev2 (#9482)
* ext65rev2 initial

* open drain change and config

* pwm

* pwm streams

* spi

* ws2812 spi

* oled

* enable sleep

* keymap and dissable oled

* readd oleds

* nooled

* led_update_kb revised

* update and remove board specific files and add to ext65rev2.c

* Update OLED usb status

* Update  keyboards led state

* Layer state set kb

* Return state

* Update  keyboards led state

* Update OLED usb status

* merge master and merge rev folders

* add readme

* move board_init to only if OLED is enabled

* update readme

* update rules.mk

* Remove OLED from rules.mk

* Update config.h

* show AEBoards

* Update keyboards/aeboards/ext65/rev2/rules.mk
2020-08-12 17:24:40 -07:00

78 lines
2.1 KiB
C

/*
Copyright 2015 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0x4145 // "AE"
#define PRODUCT_ID 0xA652 // AEboards EXT65 Rev2
#define DEVICE_VER 0x0001
#define MANUFACTURER AEboards
#define PRODUCT AEBoards Ext65 Rev2
/* key matrix size */
/* key matrix size */
#define MATRIX_ROWS 10
#define MATRIX_COLS 10
/* key matrix pins */
#define MATRIX_ROW_PINS { A10, A9, A8, B7, A2, A1, B12, B11, B10, B2 }
#define MATRIX_COL_PINS { B14, B6, A0, B1, B0, A7, A6, A5, A4, A3 }
#define DIODE_DIRECTION COL2ROW
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
//RGB Underglow WS2812
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 24
#define RGB_DI_PIN B15
//SPI
#define WS2812_SPI SPID2
#define WS2812_SPI_MOSI_PAL_MODE 0
#define WS2812_EXTERNAL_PULLUP
// I2C OLED defines
#define I2C1_SCL 8
#define I2C1_SDA 9
#define I2C1_SCL_PAL_MODE 1
#define I2C1_SDA_PAL_MODE 1
#define I2C1_TIMINGR_PRESC 0U
#define I2C1_TIMINGR_SCLDEL 3U
#define I2C1_TIMINGR_SDADEL 1U
#define I2C1_TIMINGR_SCLH 3U
#define I2C1_TIMINGR_SCLL 9U
// LED defines
#define BACKLIGHT_PIN B5
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 2
#define BACKLIGHT_PAL_MODE 1
#define BACKLIGHT_LEVELS 6
#define BACKLIGHT_BREATHING
#define BREATHING_PERIOD 6