qmk_firmware/keyboards/keebio/iris/rev1/config.h
2019-12-16 11:20:33 -08:00

83 lines
2.4 KiB
C

/*
Copyright 2017 Danny Nguyen <danny@keeb.io>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xCB10
#define PRODUCT_ID 0x1256
#define DEVICE_VER 0x0100
#define MANUFACTURER Keebio
#define PRODUCT Iris Keyboard
#define DESCRIPTION Split 50 percent ergonomic keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 10
#define MATRIX_COLS 6
// wiring of each half
#define MATRIX_ROW_PINS { D7, E6, B4, B5, D4 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* serial.c configuration for split keyboard */
#define SOFT_SERIAL_PIN D0
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
#define BACKLIGHT_PIN D2
#define BACKLIGHT_LEVELS 5
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLED_NUM 12 // Number of LEDs
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
// EEPROM usage
// TODO: refactor with new user EEPROM code (coming soon)
#define EEPROM_MAGIC 0x451F
#define EEPROM_MAGIC_ADDR 34
// Bump this every time we change what we store
// This will automatically reset the EEPROM with defaults
// and avoid loading invalid data from the EEPROM
#define EEPROM_VERSION 0x08
#define EEPROM_VERSION_ADDR 36
// Dynamic keymap starts after EEPROM version
#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
// Dynamic macro starts after dynamic keymaps (37+(4*10*6*2)) = (37+480)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 517
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 507 // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
#define DYNAMIC_KEYMAP_MACRO_COUNT 16